100+ Engineering Work Jobs in Pulau Pinang - September 2026 - High Salaries
Showing 174 jobs results for
"engineering work"
in Pulau Pinang
MYR2,300 - MYR3,500 Per Month
- Handle customer complaints and internal quality issues, including conducting root cause analysis and implementing corrective actions.
- Participate in New Product Introduction (NPI)meetings and develop and establish appropriateQuality Plans (QP).
- Provide technical support for Product Certification (PC), PPS, and the preparation and formatting of Load and Compression Test requirements and results. ...
Be an early applicant!
Posted
7 days ago
MYR2,200 - MYR2,500 Per Month
Fresh Graduates
- Build, modify, maintain, and troubleshoot engineering test fixtures and qualification setups.
- Collaborate with engineering teams to investigate issues, identify root causes, and drive timely issue closure
- Perform product testing, qualification, and failure analysis to support new product introductions, engineering evaluations, and customer requirements. ...
Be an early applicant!
Posted
22 days ago
Production Planner Cum Supervisor
MYR2,500 - MYR4,000 Per Month
- Follow up on production delays, machine breakdowns, material shortages, and quality issues
- Supervise production activities and ensure production targets, quality, and delivery schedules are achieved
- Coordinate closely with Sales, Purchasing, Warehouse, QC, and Production teams ...
Posted
6 days ago
MYR3,500 - MYR4,500 Per Month
Fresh Graduates
- To plan, coordinate and monitor subcontractor's activities at project sites
- To maintain good house-keeping and implement safety practices
- To ensure that all works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc. ...
Posted
2 days ago
Undisclosed
- Responding to production maintenance calls within the defined response time.
- Performing basic electrical, mechanical, pneumatic, hydraulic, and control-system troubleshooting, according to competency level.
- Updating maintenance checklists, work orders, repair records, and spare-part usage records. ...
Be an early applicant!
Posted
22 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. Assist in the development and implementation of supplier management programs. ...
Be an early applicant!
Posted
16 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. ...
Be an early applicant!
Posted
22 days ago
Undisclosed
Be an early applicant!
Posted
22 days ago
MYR2,000 - MYR2,800 Per Month
- Assist project teams during project execution.
- Prepare service reports, installation records, and technical documentation.
- Support factory acceptance testing (FAT), site acceptance testing (SAT), and customer training activities. ...
Posted
19 days ago
MYR4,500 - MYR6,500 Per Month
- Generate material requirements based on production schedules and ensure sufficient raw materials and components are available.
- Coordinate closely with Production, Purchasing, Warehouse, Quality, Engineering and Sales teams.
- Monitor the availability and delivery status of purchased materials and components. ...
Posted
13 days ago
Technical Sales Executive
Undisclosed
- Build and maintain strong relationships with existing customers to support repeat business and customer satisfaction.
- Actively identify and pursue new sales opportunities within the assigned area.
- Maintain accurate records and regularly report on sales activities and pipeline to management. ...
Posted
a month ago
MYR4,500 - MYR6,000 Per Month
- Support new product introductions (NPI) by setting up and validating new processes and equipment.
- Monitor production data and KPIs to identify areas for improvement, and drive continuous improvement initiatives.
- Lead root cause analysis and corrective actions for process and equipment-related issues.Ensure compliance with industry standards and company policies, including safety and quality requirements. ...
Posted
8 days ago
Bending Technician/ Operator
MYR1,700 - MYR3,000 Per Month
- To ensure the bending process produce best results as per customer requirement.
- To perform in-process quality inspection and measurement of finished products and compare them with requirements using proper inspection tools.
- To perform daily machinery inspection with checklist recorded & maintained to ensure machines functionality. ...
Posted
21 days ago
MYR3,500 - MYR5,000 Per Month
- Load and unload materials and finished products from CNC machines, ensuring safe handling practices.
- Assist in the setup and calibration of CNC machines, including tooling and fixture installation.
- Read and interpret technical drawings, blueprints, and work instructions to guide production processes. ...
Posted
22 days ago
Senior Production Planner
MYR6,000 - MYR8,000 Per Month
- To plan, prioritize and sequence production orders based on customer priorities, material availability, machine capacity and production constraints.
- To balance production demand with available manpower, machine capacity and material availability to achieve optimum resource utilization and on-time delivery.
- To coordinate and monitor production workflow across all departments to ensure jobs are completed according to schedule and committed delivery dates. ...
Be an early applicant!
Posted
20 days ago
MYR8,500 - MYR13,800 Per Month
George Town, Pulau Pinang
- Prepare and administer contracts, including drafting, reviewing, and negotiating terms and conditions with contractors, subcontractors, and suppliers.
- Evaluate and manage project risks, identifying potential cost overruns, delays, and other issues, and developing mitigation strategies.
- Conduct value engineering exercises to identify cost-saving opportunities without compromising quality or functionality. ...
Posted
a month ago
MYR3,000 - MYR4,000 Per Month
Fresh Graduates
- Process Monitoring & Adjustment: Monitor production progress and key performance metrics to identify bottlenecks, delays, or inefficiencies. Analyze data and implement timely schedule adjustments or corrective actions as needed.
- Reporting & Compliance: Maintain accurate production and inventory reports, providing regular updates to management on schedule status, capacity utilization, and production efficiency. Ensure planning activities align with quality standards, company policies, and regulatory requirements.
- Continuous Improvement: Support and participate in process improvement initiatives aimed at optimizing production efficiency and reducing costs. Contribute to the development of contingency plans and strategies for handling equipment failures or production disruptions. ...
Posted
a month ago
Undisclosed
- Liaise with internal team in reviewing the incoming material rejection from IQC and production with disposition action and feedback to supplier if rejection proved to be valid.
- Issue SCAR to supplier non conformance incoming lot and drive the supplier for root cause and corrective action(s) (RCCA) (8D, 5-Whys, FMEA, SPC) to eliminate recurring quality issues.
- Conduct an investigation and complete justification report on rejection feedback by IQC, production and customer side if the issue is caused by the supplier side. ...
Posted
a month ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
- Collaborate with cross-functional teams, including quality control and maintenance, to resolve production-related problems and ensure continuous improvement.
- Gain hands-on experience with plastic injection molding processes and equipment, including injection molding machines and associated tooling.
- Contribute to data collection and analysis related to production output, cycle times, and defect rates to identify areas for optimization. ...
Posted
9 days ago
MYR2,300 - MYR3,500 Per Month
- Follow all safety procedures, SOPs, and work instructions.
- Record maintenance activities and equipment issues accurately.
- Report recurring equipment issues or abnormal conditions for further investigation and improvement. ...
Posted
5 days ago
MYR2,500 - MYR3,500 Per Month
- Perform quality checks using measurement tools such as calipers and micrometers.
- Monitor machine performance and make necessary adjustments.
- Maintain equipment and perform preventive maintenance. ...
Posted
15 days ago
MYR4,000 - MYR5,000 Per Month
- To develop and implement a continual improvement program to achieve the shortest cycle times and optimal material management, aiming to eliminate wastage.
- Track delivery status and follow up on delayed, damaged, or missing shipments.
- Coordinate incoming and outgoing deliveries and ensure goods are properly packed, labelled, and handled. ...
Posted
20 days ago
MYR3,500 - MYR5,500 Per Month
- · Implementing preventive maintenance program
- · Implementing predictive maintenance program
- · Root cause analysis for failure (5-Why) ...
Posted
16 days ago
MYR2,500 - MYR3,500 Per Month
- Plan and coordinate site works, technician assignments and maintenance activities.
- Ensure efficient allocation of manpower, tools, equipment and technical resources.
- Coordinate with relevant teams to resolve site-related technical issues. ...
Posted
a month ago
MYR4,000 - MYR5,000 Per Month
- Provide helpdesk support for employees (hardware, software, connectivity issues)
- Ensure regular system updates, antivirus protection, backups, and IT asset management
- Manage IT inventory, procurement, and lifecycle of equipment ...
Posted
19 days ago
MYR3,500 - MYR5,000 Per Month
- Precision Tool Grinding: Grind high-precision punch, reamers and custom micro-tools from solid carbide or HSS blanks.
- Wheel Profile Dressing: Select, mount, and dress diamond and CBN wheel packs. Measure and input wheel qualification data into the CNC controller.
- In-Process Quality Control: Perform first-article and in-process inspections using ultra-precision metrology equipment (e.g. profile projectors, laser micrometers) to guarantee tolerances down to the micron level. ...
Posted
23 days ago
MYR3,500 - MYR5,000 Per Month
- Inspect finished products to ensure they meet quality standards
- Collaborate with the production team to identify and resolve any issues that arise during the manufacturing process
- Maintain accurate records and documentation related to the production process ...
Posted
2 months ago
MYR6,999 - MYR10,000 Per Month
- Lead negotiations on Procurement agreements, including, but not limited to, Master Agreements, Statements of Work, Change Orders balancing business deliverables, legal interests and pricing
- Conduct analysis on proposals for services & products in support of various factory, research and development functions
- Analyze total costs, assist business functions with ROI analysis, price and rate benchmarking and negotiate favorable business terms to leverage Western Digital purchasing power ...
Posted
2 months ago
Undisclosed
- Work closely with Electrical, Control, and Software Engineers to integrate mechanical designs into complete automation solutions.
- Generate bill of materials (BOMs) and support the purchasing team with specifications.
- Involve in concept development, prototyping, and design reviews. ...
Posted
a month ago
MYR4,000 - MYR7,900 Per Month
- To assist Strategic Sourcing Senior Manager on the end-to-end procurement process for indirect procurement inclusive services required for the successful completion of project requirement and any other related project.
- To be part of the Strategic Sourcing team supporting Corporate Real Estate Workforce Category specializing in Refurbishment, Renovation and Construction, providing innovative approaches to procurement execution.
- As the Project Buyer, you will have a chance to impact the procurement process. Working with other members of the team, you’ll support issuance of Request for Proposal (RFP)’s, evaluate and negotiate proposals and develop Expediting strategies. ...
Posted
2 months ago