900+ Engineering 工作 | 马来西亚 | 职位空缺 | September 2026 | Ricebowl 铁饭网
显示986个工作的结果
"engineering"
MYR2,000 - MYR3,000 每月
- Minimum 3 years working experience as Foreman, Senior Mechanic, Automotive Technician, or similar workshop role
- Strong hands-on knowledge in vehicle servicing, maintenance, and repair
- Able to diagnose common mechanical problems ...
最后机会申请此工作。
Posted
18 hours ago
Undisclosed
Fresh Graduates
- Certificate or Diploma in Mechanical, Manufacturing, Mechatronics Engineering, or equivalent.
- Hands-on experience in jig & fixture assembly or automation equipment assembly is preferred. Fresh graduates are also encouraged to apply.
- Able to read and interpret technical drawings. ...
Posted
14 days ago
MYR6,000 - MYR9,000 每月
Fresh Graduates
- Bachelor’s Degree in Electrical Engineering or equivalent
- 3 to 5 years of experience in Electrical Engineering, preferably in construction or industrial projects
- Strong knowledge of electrical systems, codes and safety standards ...
Posted
13 days ago
MYR2,000 - MYR4,000 每月
- Injection machine setup - in charge of the machine setup and smooth production run and manufactured products are able to meet customer requirements and satisfaction.
- Troubleshoot technical and electrical issues - troubleshoot any technical and electrical issues which causes machinery breakdown and limit smooth production run.
- Process optimization - Propose Work Improvement Plan (WIP) and control / system to improve safe and clean working conditions / environments and increase productivity and efficiency. ...
最后机会申请此工作。
Posted
6 days ago
MYR3,500 - MYR4,500 每月
靠近火车站
- 拥有任何学科的学士学位、文凭、专业学位或同等学历。
- 此职位需要至少2年相关领域的工作经验。
- 高度诚信、积极主动、守时。 ...
最后机会申请此工作。
Posted
an hour ago
MYR3,500 - MYR4,500 每月
靠近火车站
- 学历与工作经验（优先考虑）
- · 须具备任何科系的学士学位、大专文凭、专业学位或同等学历。
- · 此职位须具备至少2年相关领域的工作经验。 ...
最后机会申请此工作。
Posted
44 minutes ago
MYR3,000 - MYR4,500 每月
- Minimum 2 years experience operating laser cutting machines.
- Precision sheet metal, machining, or fabrication industries.
- Minimum 2 years experience operating laser cutting machines. ...
最后机会申请此工作。
Posted
9 days ago
Undisclosed
- Welding training, Non-Destructive Test Training, Welding Inspection Training, Geometric Dimensioning & Tolerance, QC tools, CMM or any high accuracy measuring equipment training.
- Preferably 2 to 4 years working experience in hands-on quality inspection of fabrication on Metal Works or manufacturing field.
- Experience in metal works / welding environment preferred. Able to work independently with minimal supervision. ...
最后机会申请此工作。
Posted
15 days ago
MYR2,500 - MYR3,500 每月
- Experienced 2 years above in heavy machinery
- Able to work under minimal supervision.
- Good attitude and communication skills and can cooperate with team members ...
最后机会申请此工作。
Posted
20 days ago
Junior Automotive Technician
MYR2,500 - MYR3,200 每月
Fresh Graduates
靠近火车站
- Minimum SKM Automotive or related qualification
- Basic automotive knowledge
- Fresh graduates are encouraged to apply ...
Posted
12 days ago
MYR2,000 - MYR2,300 每月
靠近火车站
- Have a valid SPM certificate and pass all subjects.
- Have a certificate or diploma in engineering, manufacturing or equivalent.
- Have at least 2-4 years of working experience in handling and operating precision automation machines, particularly medical device assembly equipment. ...
Able to communicate well in Malay and understand basic English.
Have good troubleshooting and technical skills.
+6
Posted
2 days ago
MYR2,500 - MYR3,000 每月
Fresh Graduates
- Having at least 1 years of basic experience in factory work, assembly, or plastic processing
- Ability to use basic hand tools and understand simple instructions
- Having at least 1 years of basic experience in factory work, assembly, or plastic processing ...
最后机会申请此工作。
Posted
2 days ago
MYR2,500 - MYR3,500 每月
- Job requirements:
- More than 1 year of work experience in manufacturing positions (Excellent fresh graduates can apply);
- Diploma or above in mechanical related majors. ...
Posted
2 hours ago
MYR3,500 - MYR5,800 每月
Tebrau, Johor
- Bachelor’s Degree or Diploma in Engineering or related field.
- Minimum 5 years’ experience in project management, preferably in automotive manufacturing / NPI.
- Knowledge of IATF 16949, APQP, PPAP, PFMEA, Control Plans preferred. ...
最后机会申请此工作。
Posted
5 days ago
MYR2,000 - MYR2,500 每月
+额外补偿
Fresh Graduates
Ampangan, Negeri Sembilan
靠近火车站
- Possess Diploma in Mechanical, Mechatronic, Electrical, Electronic, Automotive, Automation, or related field
- Candidates with Bachelor Degree / SPMqualifications arenot eligible for this position.
- Possess Diploma in Mechanical, Mechatronic, Electrical, Electronic, Automotive, Automation, or related field ...
Posted
13 days ago
MYR3,500 - MYR5,800 每月
Tebrau, Johor
- Bachelor’s Degree or Diploma in Engineering or related field.
- Minimum 5 years’ experience in project management, preferably in automotive manufacturing / NPI.
- Knowledge of IATF 16949, APQP, PPAP, PFMEA, Control Plans preferred. ...
Posted
8 days ago
Undisclosed
- Certificate or Diploma in Mechanical, Electrical, Mechatronics or related technical field.
- Minimum 2 to 3 year of experience preferably in FMCG Manufacturing, preferably with experience in facility, utility or maintenance activities.
- Computer Literate. ...
Posted
5 days ago
MYR1,800 - MYR2,400 每月
- Lokasi : Subang Bestari, Shah AlamGaji Kasar Bulanan : RM 2,800 ke atasPerubatan dan Insurance PercumaElaun Syif dan latihan kerja disediakanAlamat bekerja: Lot 10, Jalan Utarid U5/12, Seksyen U5, 40150 Shah Alam, Selangor,
- Kriteria yang diperlukan :
- - Boleh mula KERJA SEGERA-MESTI boleh kerja syif-MESTI boleh bekerja lebih masa (jika diperlukan) ...
Posted
12 days ago
MYR5,000 - MYR6,500 每月
- Bachelor's degree in Engineering or a related field
- Minimum 3 years of experience as a Project Engineer, preferably in the engineering industry
- Strong project management skills, including the ability to plan, coordinate and execute complex projects ...
Posted
13 days ago
MYR2,000 - MYR2,400 每月
靠近火车站
- Minimum SPM or equivalent qualification.
- Previous experience in warehouse, storekeeping, assembly, or logistics operations is preferred.
- Able to perform rack assembly work such as EzRack, Smart Rack, Wall Mount Casing, and similar products. ...
Posted
13 days ago
MYR1,700 - MYR3,000 每月
Fresh Graduates
- 最低 SPM 学历。
- 拥有汽车、机械或相关领域的证书或文凭者优先考虑。
- 具备轮胎服务、四轮定位（Wheel Alignment）或汽车维修经验者优先考虑。 ...
最后机会申请此工作。
Posted
15 days ago
MYR2,500 - MYR3,000 每月
- Diploma/Degree in Engineering, Quality Management, or a related field.
- Experience in QA/QC, inspection, or manufacturing/construction is preferred.
- Knowledge of quality standards, inspection methods, and ISO 9001. ...
最后机会申请此工作。
Posted
a day ago
MYR2,500 - MYR2,700 每月
- Perform product and component modifications according to approved engineering requirements and design changes.
- Interpret technical drawings, work instructions, and specifications accurately.
- Conduct inspections to ensure modifications meet quality standards. ...
Posted
14 days ago
MYR2,500 - MYR2,700 每月
- Perform product and component modifications according to approved engineering requirements and design changes.
- Interpret technical drawings, work instructions, and specifications accurately.
- Conduct inspections to ensure modifications meet quality standards. ...
最后机会申请此工作。
Posted
13 days ago
MYR700 - MYR1,000 每月
靠近火车站
- Currently pursuing a Diploma, Advanced Diploma, or Degree in Automotive Engineering, or SKM Level 1, 2, or 3 (or equivalent qualification).
- Available to commit to a minimum of 3 months of internship.
- No prior working experience is required—enthusiasm, a willingness to learn, and a positive attitude are what matter most. ...
最后机会申请此工作。
Posted
19 hours ago
Undisclosed
Fresh Graduates
- 拥有钢结构和钣金设计/制图的实践经验。
- 熟练使用 AutoCAD、Revit、Tekla、BIM 及其他相关设计软件。
- 了解相关的设计规范和标准。 ...
最后机会申请此工作。
Posted
2 days ago
MYR5,000 - MYR6,000 每月
- 本科或以上学历，理工科相关专业，具有1年以上工作经验；有同行业工作经验者优先。
- 熟练使用质量工具进行数据分析及异常处理，例如 MSA、SPC、FMEA、8D、4M1E、APQP 等。
- 语言要求：熟练掌握中文和英文，具备良好的听说读写能力。 ...
最后机会申请此工作。
Posted
19 hours ago
MYR1,900 - MYR2,500 每月
Fresh Graduates
- Requirements:
- Have working experience in tooling related field (Stamping / Downset)
- Ability to read and interpret engineering blueprints and technical drawings ...
最后机会申请此工作。
Posted
a month ago
MYR5,000 - MYR7,000 每月
- Diploma in Occupational Safety and Health or related fields.
- Minimum Yellow Book/Site Safety Supervisor (SSS) certification.
- Minimum 3 years of relevant working experience engineering and construction works. Hands-on experience in cleanroom design, HVAC installation, or cleanroom project delivery is a must. Familiarity with cleanroom classifications. ...
最后机会申请此工作。
Posted
2 days ago
SGD2,300 - SGD2,300 每月
靠近火车站
- Minimum 2 years of relevant automotive body repair or panel beating experience.
- Able to perform automotive panel repair work independently.
- Familiar with basic vehicle body repair techniques and procedures. ...
最后机会申请此工作。
Posted
5 days ago
Job searches related to “Engineering”