2,600+ Technician Jobs in Pulau Pinang - September 2026 - High Salaries
Showing 2,654 jobs results for
"technician"
in Pulau Pinang
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
- Attend to and troubleshoot motorbikes/superbikes
- Carry out job orders as instructed by the Team Leader.
- Ensure the workshop is clean and well-maintained. ...
Be an early applicant!
Posted
5 hours ago
MYR2,000 - MYR2,800 Per Month
- Assist project teams during project execution.
- Prepare service reports, installation records, and technical documentation.
- Support factory acceptance testing (FAT), site acceptance testing (SAT), and customer training activities. ...
Posted
12 days ago
Undisclosed
Be an early applicant!
Posted
10 days ago
MYR2,200 - MYR2,500 Per Month
Fresh Graduates
- Build, modify, maintain, and troubleshoot engineering test fixtures and qualification setups.
- Collaborate with engineering teams to investigate issues, identify root causes, and drive timely issue closure
- Perform product testing, qualification, and failure analysis to support new product introductions, engineering evaluations, and customer requirements. ...
Be an early applicant!
Posted
15 days ago
Undisclosed
- Responding to production maintenance calls within the defined response time.
- Performing basic electrical, mechanical, pneumatic, hydraulic, and control-system troubleshooting, according to competency level.
- Updating maintenance checklists, work orders, repair records, and spare-part usage records. ...
Be an early applicant!
Posted
16 days ago
MYR3,000 - MYR4,500 Per Month
- Monitor machine operations to ensure smooth production and prevent defects.
- Ensure cutting accuracy and product quality meet customer specifications.
- Inspect finished parts using measuring tools (vernier caliper, ruler, etc.). ...
Be an early applicant!
Posted
10 days ago
Undisclosed
Be an early applicant!
Posted
16 days ago
Undisclosed
Be an early applicant!
Posted
10 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. Assist in the development and implementation of supplier management programs. ...
Be an early applicant!
Posted
10 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. ...
Be an early applicant!
Posted
16 days ago
Undisclosed
Fresh Graduates
- Assist engineers in troubleshooting and resolving assembly-related issues.
- Maintain tools, equipment, and workstations in proper working condition.
- Support continuous improvement initiatives for production and assembly processes.
Posted
14 days ago
MYR1,700 - MYR2,500 Per Month
- Ensure works are performed according to technical specifications, approved procedures and safety requirements.
- Ensure CCTV systems and related equipment are installed and maintained properly.
- Report work completion status, technical issues, defects and site conditions to the Senior Technical Executive / Team Leader. ...
-Willing and able to travel between project sites within the Northern Zone.
-Willing to work after hours
+4
Be an early applicant!
Posted
19 days ago
MYR2,500 - MYR3,000 Per Month
Fresh Graduates
- Keep the work station clean and follow basic safety rules on the factory floor.
- Cut, bend, shape, and assemble PFA plastic tubing according to customer orders and technical drawings.
- Operate simple production tools, machines, and heating equipment safely. ...
Be an early applicant!
Posted
3 days ago
Service Engineer- Mandarin Speaker Needed
MYR2,500 - MYR4,000 Per Month
George Town, Pulau Pinang
- Maintain good relationships with customers and provide quality after-sales support.
- Liaise and work closely with customers to address service concerns and resolve technical issues.
- Take charge of assigned products and ensure smooth operations while providing continuous service support. ...
Posted
10 days ago
MYR2,500 - MYR3,500 Per Month
- Plan and coordinate site works, technician assignments and maintenance activities.
- Ensure efficient allocation of manpower, tools, equipment and technical resources.
- Coordinate with relevant teams to resolve site-related technical issues. ...
Be an early applicant!
Posted
20 days ago
MYR3,000 - MYR4,500 Per Month
George Town, Pulau Pinang
- Preparing submission documents, follow up, making compliance to authorities' requirements and comments in order to obtain approval or permit to start work and grant CCC upon completion.
- Attending meetings, site visit, inspections and testing to ensure the site works are in compliance and of good quality.
- Lead and monitor designer and draftperson to make sure the deliverables are meeting project's needs and mistake-free. ...
Posted
a day ago
MYR2,000 - MYR3,000 Per Month
- Assist with the installation of solar panels on rooftops and ground-mounted structures
- Collaborate with senior technicians and engineers on system upgrades, retrofits and expansions
- Ensure installations are completed according to project specifications and timelines ...
Posted
3 days ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
- Collaborate with cross-functional teams, including quality control and maintenance, to resolve production-related problems and ensure continuous improvement.
- Gain hands-on experience with plastic injection molding processes and equipment, including injection molding machines and associated tooling.
- Contribute to data collection and analysis related to production output, cycle times, and defect rates to identify areas for optimization. ...
Be an early applicant!
Posted
2 days ago
Bending Technician/ Operator
MYR1,700 - MYR3,000 Per Month
- To ensure the bending process produce best results as per customer requirement.
- To perform in-process quality inspection and measurement of finished products and compare them with requirements using proper inspection tools.
- To perform daily machinery inspection with checklist recorded & maintained to ensure machines functionality. ...
Posted
15 days ago
MYR2,300 - MYR3,500 Per Month
- Handle customer complaints and internal quality issues, including conducting root cause analysis and implementing corrective actions.
- Participate in New Product Introduction (NPI)meetings and develop and establish appropriateQuality Plans (QP).
- Provide technical support for Product Certification (PC), PPS, and the preparation and formatting of Load and Compression Test requirements and results. ...
Be an early applicant!
Posted
9 hours ago
MYR3,500 - MYR4,500 Per Month
Fresh Graduates
- To plan, coordinate and monitor subcontractor's activities at project sites
- To maintain good house-keeping and implement safety practices
- To ensure that all works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc. ...
Be an early applicant!
Posted
a day ago
Company Confidential
MYR5,000 - MYR6,000 Per Month
- Quality issue analysis: Coordinate the team, use tools such as 5Why, fishbone diagram, and 8D report to conduct root cause analysis on customer complaints or internal non-conforming products, formulate corrective and preventive measures, track and verify the closed-loop effect, and write reports.
- Quality Data Management: Query, analyze or output production quality data (such as pass rate, failure rate, MSA) through tools like MES and Minitab, monitor production conditions, and confirm improvement directions.
- Quality Training and Awareness Enhancement: Develop quality awareness training materials, carry out QCC (Quality Control Circle) activities, and enhance the quality responsibility of all staff. ...
Be an early applicant!
Posted
a day ago
Mechanical & Electrical Technician / Electrical Assembler
MYR2,500 - MYR3,500 Per Month
- Maintain a clean, organized, and safe working environment.
- Assemble electrical and electronic components according to technical drawings and schematics.
- Perform wiring, soldering, and testing of electrical components. ...
Posted
9 days ago
MYR2,000 - MYR2,800 Per Month
+Additional Compensation
- Perform other repair works in the unit as required.
- Ensure all tasks are carried out professionally, ethically, and in a timely manner.
- Perform any other duties and responsibilities assigned by the management. ...
Be an early applicant!
Posted
19 days ago
MYR5,000 - MYR6,000 Per Month
- Quality issue analysis: Coordinate the team, use tools such as 5Why, fishbone diagram, and 8D report to conduct root cause analysis on customer complaints or internal non-conforming products, formulate corrective and preventive measures, track and verify the closed-loop effect, and write reports.
- Quality Data Management: Query, analyze or output production quality data (such as pass rate, failure rate, MSA) through tools like MES and Minitab, monitor production conditions, and confirm improvement directions.
- Quality Training and Awareness Enhancement: Develop quality awareness training materials, carry out QCC (Quality Control Circle) activities, and enhance the quality responsibility of all staff. ...
Be an early applicant!
Posted
12 hours ago
MYR3,500 - MYR5,000 Per Month
- Load and unload materials and finished products from CNC machines, ensuring safe handling practices.
- Assist in the setup and calibration of CNC machines, including tooling and fixture installation.
- Read and interpret technical drawings, blueprints, and work instructions to guide production processes. ...
Posted
16 days ago
MYR2,100 - MYR4,000 Per Month
Fresh Graduates
- Works from guidelines and standardized procedures/instructions.
- May design/build tools. Box build level debug and PCA level troubleshooting and rework
- Duties may be related to installation, maintenance, repair and support of manufacturing equipment, technical support of one or more production processes, product test and troubleshooting, and technical analyses and problem-solving. ...
Posted
9 days ago
MYR3,500 - MYR5,000 Per Month
- Precision Tool Grinding: Grind high-precision punch, reamers and custom micro-tools from solid carbide or HSS blanks.
- Wheel Profile Dressing: Select, mount, and dress diamond and CBN wheel packs. Measure and input wheel qualification data into the CNC controller.
- In-Process Quality Control: Perform first-article and in-process inspections using ultra-precision metrology equipment (e.g. profile projectors, laser micrometers) to guarantee tolerances down to the micron level. ...
Posted
16 days ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform electrical validationincludingunpowered IV curve and Time-Domain Reflectometry (TDR) to identify failing areas.
- Utilize CSAM, X-ray imaging, and material analysis tools for defect detection.
- Carry out visual inspection using microscopes to identify defects on product substrates. ...
Be an early applicant!
Posted
a month ago
MYR2,500 - MYR3,500 Per Month
- Track shipment schedules to ensure timely arrival of critical spare parts and equipment.
- Request and obtain quotations from suppliers and service providers.
- Evaluate quotations and prepare recommendations for approval. ...
Be an early applicant!
Posted
5 hours ago
Job searches related to “Technician”