500+ Mechanical Jobs in Pulau Pinang - September 2026 - High Salaries
Showing 539 jobs results for
"mechanical"
in Pulau Pinang
MYR1,700 - MYR2,500 Per Month
+Additional Compensation
- Liaise closely with the production team to monitor order progress and ensure meet customer delivery dates.
- Assist in coordinating and supporting local and overseas exhibitions as needed.
- Ad hoc tasks assigned by management.
Posted
20 days ago
Undisclosed
- Liaise with internal team in reviewing the incoming material rejection from IQC and production with disposition action and feedback to supplier if rejection proved to be valid.
- Issue SCAR to supplier non conformance incoming lot and drive the supplier for root cause and corrective action(s) (RCCA) (8D, 5-Whys, FMEA, SPC) to eliminate recurring quality issues.
- Conduct an investigation and complete justification report on rejection feedback by IQC, production and customer side if the issue is caused by the supplier side. ...
Posted
a month ago
MYR5,000 - MYR7,000 Per Month
- Performs proper filing and documentation of engineering records.
- Liaises with other departments on design-related issues and implements corrective measures to prevent recurrence.
- Undertakes other design-related duties assigned by the immediate superior. ...
Be an early applicant!
Posted
10 days ago
Quality Assurance (QA) Manager
MYR5,000 - MYR7,000 Per Month
- Review and monitor inspection reports, quality records, and production quality performance.
- Handle customer complaints, non-conformities, and quality issues.
- Lead CAPA, 8D, Root Cause Analysis, 5 Why, and corrective/preventive actions. ...
Posted
2 days ago
MYR5,000 - MYR7,000 Per Month
- Performs proper filing and documentation of engineering records.
- Liaises with other departments on design-related issues and implements corrective measures to prevent recurrence.
- Undertakes other design-related duties assigned by the immediate superior. ...
Be an early applicant!
Posted
10 days ago
Undisclosed
- Participate and cooperate within the team to complete overall task efficiently.
- Check work after completion of each operation in job and/or completed job to ensure assembly is complete per drawing, that there are no defects and that the work area is clean.
- Ensure or assist superior in ensuring that defined project milestones such as SAT, ESSO, delivery, FAT, etc. are met. ...
Be an early applicant!
Posted
14 days ago
MYR5,000 - MYR7,000 Per Month
- Performs proper filing and documentation of engineering records.
- Liaises with other departments on design-related issues and implements corrective measures to prevent recurrence.
- Undertakes other design-related duties assigned by the immediate superior. ...
Be an early applicant!
Posted
10 days ago
MYR5,000 - MYR7,000 Per Month
- Performs proper filing and documentation of engineering records.
- Liaises with other departments on design-related issues and implements corrective measures to prevent recurrence.
- Undertakes other design-related duties assigned by the immediate superior. ...
Be an early applicant!
Posted
10 days ago
MYR4,000 - MYR5,000 Per Month
- To develop and implement a continual improvement program to achieve the shortest cycle times and optimal material management, aiming to eliminate wastage.
- Track delivery status and follow up on delayed, damaged, or missing shipments.
- Coordinate incoming and outgoing deliveries and ensure goods are properly packed, labelled, and handled. ...
Posted
18 days ago
Undisclosed
- Collaborate with cross-functional teams to ensure seamless customer experiences
- Maintain detailed records of customer interactions and follow-up actions
- Continuously seek opportunities to improve customer satisfaction and enhance operational efficiency ...
Posted
a month ago
MYR3,000 - MYR6,000 Per Month
Fresh Graduates
- Coordinate with internal teams on stock, delivery, and documentation
- Support customers on aluminium material requirements
- Develop new customers and business opportunities ...
Posted
25 days ago
MYR3,500 - MYR5,000 Per Month
- Precision Tool Grinding: Grind high-precision punch, reamers and custom micro-tools from solid carbide or HSS blanks.
- Wheel Profile Dressing: Select, mount, and dress diamond and CBN wheel packs. Measure and input wheel qualification data into the CNC controller.
- In-Process Quality Control: Perform first-article and in-process inspections using ultra-precision metrology equipment (e.g. profile projectors, laser micrometers) to guarantee tolerances down to the micron level. ...
Posted
21 days ago
MYR3,000 - MYR4,000 Per Month
- Maintaining routing in SAP system
- Reviewing and preparing digital harness board drawing
- Reviewing and submitting Technical Queries (TQ) ...
Posted
a month ago
Undisclosed
- Service, trouble shoot and repair machines / equipment & report major problems and emergencies to Superior with appropriate recommendations.
- Review of workshops spare parts inventories & initiates / raise purchase requisition.
- Ensure the cleanliness of workshop is maintained to the highest level at all time. ...
Posted
a month ago
Undisclosed
- Process documents improvement.
- Prepare process equipment for mass production & technical support to Production for process improvement.
- Buy-off documentation including customer information and internal document before mass production. ...
Posted
a month ago
Human Resource Executive
MYR3,200 - MYR4,000 Per Month
- Coordinate work permit, PVP, employment pass, renewal, cancellation, and other immigration-related matters with relevant authorities and agencies.
- Prepare and maintain required immigration documents and monitor the validity and expiry of passports, visas, permits and employment pass.
- Coordinate FOMEMA medical examinations and assist foreign workers and expatriates with on boarding. ...
Posted
a day ago
Undisclosed
- Establish WI for processes plan / machine Set-up.
- Guide machinist on machine setup, operation as per the program generated.
- Ensure the program and WI of the program is stored and managed properly in the system. ...
Be an early applicant!
Posted
14 days ago
Undisclosed
- Follow oral/written instructions provided by the team leader, supervisor and/or engineering to complete assembly tasks.
- Ensure that parts issued are free from visible defects.
- Check work after completion of each operation in job and/or completed job to ensure assembly is complete per drawing, that there are no defects and that the work area is clean. ...
Be an early applicant!
Posted
14 days ago
Undisclosed
Be an early applicant!
Posted
14 days ago
Undisclosed
- Perform detailed capacity analysis and equipment utilization tracking.
- Collaborate with production and maintenance teams to integrate new equipment or fixtures.
- Prepare technical reports and presentations regarding process efficiency for senior management. ...
Be an early applicant!
Posted
14 days ago
Undisclosed
- To ensure the production processes are well controlled on process times, cycle time and material usage.
- To lead production machinists and coordinate failure quality issue for root cause analysis, correction and preventive actions.
- To ensure the production safety and 5S is documentation (WI) implemented and reviewed from time to time for the machinist to follow. ...
Be an early applicant!
Posted
14 days ago
Undisclosed
- Report internal audit findings, follow up & close the Non-Compliance Report/Opportunity For Improvement(OFI) issued.
- Conduct internal auditor training & other QMS related trainings.
- Change control monitoring, reporting & improvement. ...
Be an early applicant!
Posted
14 days ago
Undisclosed
Be an early applicant!
Posted
14 days ago
Undisclosed
- On time fill up the production document accurately and MES system timely and clearly.
- To ensure production safety & 5S is carried out and maintained.
- Other duties and assignments as instructed by superiors from time to time. ...
Be an early applicant!
Posted
14 days ago
Undisclosed
- Ensure that parts issued are free of visible defects.
- Other duties and assignments as instructed by superiors from time to time.
- To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided bythe company.
Be an early applicant!
Posted
14 days ago
Undisclosed
- To raise Purchase Requisition based on raw material required through ePR.
- Coordinates production daily shipment arrangement to finishing and assembly sites.
- Follow up with Engineering & Doc Con to ensure all document release on time for production activities. ...
Be an early applicant!
Posted
14 days ago
Job searches related to “Mechanical”