200+份Engineering Drawings 工作机会 - 最新工作招聘 - July 2026
显示214个工作的结果
"engineering drawings"
支持聊天
Quality Assurance Executive
MYR3,000 - MYR5,000 每月
- Diploma/Degree in Quality Management, Mechanical Engineering,
- Manufacturing Engineering or related field. Minimum 2 years of experience in ISO 9001 Quality Management System; experience in ISO 13485 is an added advantage.
- Experience in handling customer complaints, quality investigations and implementing corrective and preventive actions (CAPA). Familiar with quality tools such as 8D Report, Root Cause Analysis (RCA), FMEA, SPC and 5 Why Analysis. ...
Posted
4 days ago
MYR3,000 - MYR5,000 每月
Fresh Graduates
- Minimum Degree in Chemistry / Applied Science / Chemical EngineeringComputer literate (Microsoft Word, Lotus, Excel)
- With working in Paint / Chemical Industries will be an added advantage
- Experience in lab would be preferred ...
最后机会申请此工作。
Posted
3 days ago
支持聊天
Quality Inspector / Senior Quality Inspector
MYR2,500 - MYR4,000 每月
- Minimum SPM/Diploma in Engineering or related field.
- Minimum 2 years of experience in quality inspection within a precision machining or manufacturing environment. Knowledge and hands-on experience in operating VMM and CMM. Able to read engineering drawings, GD&T and dimensioning requirements.
- Familiar with measuring equipment such as Vernier Caliper, Micrometer, Height Gauge and Pin Gauge. ...
Posted
3 days ago
Undisclosed
- Diploma in Engineering / Engineering Technology / Drafting / or related technical disciplineProficiency in AutoCAD, or similar engineering softwareGood communication and teamwork skillsSupport project teams in meeting quality, schedule, and deliverable requirementsPrepare and update electrical drawings using AutoCAD and other drafting software
最后机会申请此工作。
Posted
2 days ago
Undisclosed
- Bachelor’s Degree in Engineering. Ability to assist in planning, coordinating, and delivering projects within approved scope, schedule, and budget while working closely with internal teams, contractors, vendors, and clients. Capable of reviewing engineering deliverables, technical documents, and drawings, monitoring project progress, tracking milestones, and preparing status reports. Experienced in supporting procurement activities, vendor coordination, and material follow-up, as well as identifying and resolving technical and operational issues throughout the project lifecycle. Knowledge of company standards, HSE requirements, and industry regulations, with the ability to coordinate site activities, support construction and installation works, maintain accurate project documentation, prepare Minutes of Meeting (MOM), and ensure timely follow-up of action items.
最后机会申请此工作。
Posted
2 days ago
Assistant Machine Specialist
MYR1,800 - MYR2,600 每月
Fresh Graduates
靠近火车站
- Good communication skills in English & Bahasa Malaysia
- Diploma in Mechanical Engineering, Industrial Technology, or a related field.
- Fresh graduates are also encouraged to apply ...
Posted
11 days ago
CX Testing & Commissioning Engineer
MYR3,000 - MYR10,000 每月
靠近火车站
- Degree or Diploma in Electrical Engineering, Mechanical Engineering, Mechatronics, IT/Systems Engineering, or related field.
- 1–5 years of experience in testing, commissioning, system integration, or infrastructure engineering (fresh graduates may be considered for junior roles).
- Strong understanding of testing procedures, commissioning workflows, and system validation. ...
Posted
a month ago
MYR3,000 - MYR5,500 每月
- Minimum Certificate, Diploma, or equivalent qualification in Mechanical Engineering, Manufacturing, Machining, or related field.
- Experience operating CNC machines, lathe machines, milling machines, or related equipment.
- Ability to read engineering drawings and use measuring instruments such as Vernier Callipers and Micrometres. ...
Posted
5 days ago
支持聊天
MYR3,000 - MYR5,000 每月
Simpang Ampat, Pulau Pinang (+1)
靠近火车站
- Certificate / Diploma / Degree in Electrical Engineering, Mechatronics, Automation, Electronics, Mechanical Engineering, or related fields.
- Hands-on experience with:Sensors, actuators, motor controls, and industrial panels
- Robotics, conveyors, AMR/AGV systems (added advantage) ...
Posted
a month ago
MYR2,200 - MYR4,500 monthly
+额外补偿
Fresh Graduates
- Operate and set up Wire EDM/ Surface Grinding/ CNC Milling/ CNC Lathe machines.
- Interpret technical drawings, GD&T requirements, and machining instructions.
- Perform precision machining to meet tight tolerances and quality specifications. ...
最后机会申请此工作。
Posted
3 days ago
支持聊天
MYR2,500 - MYR2,800 每月
靠近火车站
- Minimum Certificate, Diploma, or equivalent qualification in Drafting, Engineering, Architecture, Interior Design, or related field.
- At least 1–3 years of working experience in 2D and 3D drafting or related field. Fresh graduates with strong software skills are encouraged to apply.
- Proficient in AutoCAD, SolidWorks, SketchUp, or other CAD software. ...
最后机会申请此工作。
Posted
2 days ago
Undisclosed
Petaling, WP Kuala Lumpur
靠近火车站
- Responsible for managing and executing the engineering of oil and gas projects, from concept to completion.
- Leads the development of engineering deliverables, reviews design drawings and specifications, and ensures compliance with industry standards, codes, and client requirements.
- Coordinates with multi-disciplinary teams to resolve technical issues, monitors engineering progress, and ensures timely delivery of quality outputs. ...
最后机会申请此工作。
Posted
2 days ago
支持聊天
Site Supervisor / Coordinator - House Construction
MYR2,000 - MYR2,500 每月
Fresh Graduates
- Minimum SPM, Certificate, Diploma or equivalent qualification in Construction, Civil Engineering, Building, Architecture or related field.
- Fresh graduates are encouraged to apply. Experience in house construction, renovation or building works will be an advantage.
- Able to read and understand basic construction drawings, site layout and work instructions. ...
最后机会申请此工作。
Posted
2 days ago
Undisclosed
Petaling, WP Kuala Lumpur
靠近火车站
- Prepare engineering deliveravles - ensure self-check and discipline check
- File and archive Final Design Documentation including softcopies
- Prepare and incorporate commented engineering deliverables including reports, basis, calculations analysis, forms, specification, datasheets, drawings and etc. ...
最后机会申请此工作。
Posted
2 days ago
Undisclosed
Petaling, WP Kuala Lumpur
靠近火车站
- Prepare technical drawings from design sketches and engineering data.
- Monitor the effectiveness of the project quality system and recommends changes for improvements where applicable.
- Check the detail design documents for correctness and quality, marks-up any comments or revision on these documents and ensure that the changes are included and completed on the latest copies of all affected documents. ...
最后机会申请此工作。
Posted
2 days ago
支持聊天
Service & Project Technician
MYR2,500 - MYR3,500 monthly
Fresh Graduates
靠近火车站
- Certificate, Diploma, or Degree in Electrical Engineering, Electronic Engineering, Mechatronic Engineering, or related field.
- Minimum 1–3 years of experience in electrical maintenance, industrial automation, motor control, power quality, or related industries.
- Fresh graduates with strong technical aptitude and willingness to learn are encouraged to apply. ...
Posted
4 days ago
支持聊天
Site Engineer / Site Admin
Undisclosed
- Bachelor's Degree in Civil Engineering, Construction Management, or related field.
- Fresh graduates are encouraged to apply. Candidates with 1–2 years of relevant experience are an added advantage.
- Able to read and interpret construction drawings and technical specifications. ...
Posted
2 days ago
Undisclosed
靠近火车站
- Bachelor’s Degree in Electrical Engineering or a closely related discipline from an accredited university.
- Professional certification or licensure in electrical engineering is advantageous.
- Comprehensive knowledge of infrastructure project requirements, especially within rail transit projects, including relevant statutory and safety regulations. ...
最后机会申请此工作。
Posted
5 days ago
Undisclosed
靠近火车站
- Bachelor’s Degree in Engineering.
- Ability to assist in planning, coordinating, and delivering projects within approved scope, schedule, and budget while working closely with internal teams, contractors, vendors, and clients. Capable of reviewing engineering deliverables, technical documents, and drawings, monitoring project progress, tracking milestones, and preparing status reports.
- Experienced in supporting procurement activities, vendor coordination, and material follow-up, as well as identifying and resolving technical and operational issues throughout the project lifecycle. Knowledge of company standards, HSE requirements, and industry regulations, with the ability to coordinate site activities, support construction and installation works, maintain accurate project documentation, prepare Minutes of Meeting (MOM), and ensure timely follow-up of action items. ...
最后机会申请此工作。
Posted
2 days ago
支持聊天
Precision Machining Machine Tool Technician
MYR3,000 - MYR5,500 每月
- Diploma or Technical Certificate in Mechanical Engineering, Precision Engineering, Manufacturing Technology, or a related discipline.
- Minimum 2–5 years of experience in CNC machining, machine setup, commissioning, or precision manufacturing.
- Strong ability to read and interpret engineering drawings, GD&T specifications, and technical documentation. ...
最后机会申请此工作。
Posted
4 days ago
MYR1,700 - MYR2,200 每月
靠近火车站
- Certificate or Diploma in Mechanical / Manufacturing / Polymer Engineering or related field.
- 2–5 years of experience in injection moulding operations (preferably in plastics manufacturing).
- Hands-on experience with injection moulding machines. ...
Posted
5 days ago
MYR4,000 - MYR7,000 每月
- 机械、电机工程或相关专业学历。
- 至少2年相关经验。
- 能阅读机电施工图。 ...
最后机会申请此工作。
Posted
3 days ago
MYR2,800 - MYR3,500 每月
Fresh Graduates
靠近火车站
- 土木工程或相关领域的学士学位。
- 入门级职位，适合学业成绩优异的应届毕业生。
- 精通结构工程原理及其在设计中的应用。 ...
最后机会申请此工作。
Posted
2 days ago
支持聊天
MYR2,500 - MYR3,500 每月
Fresh Graduates
- 拥有钢结构和钣金设计/制图的实践经验。
- 熟练使用 AutoCAD、Revit、Tekla、BIM 及其他相关设计软件。
- 了解相关的设计规范和标准。 ...
最后机会申请此工作。
Posted
4 days ago
支持聊天
CNC Technician - Mandarin
MYR3,500 - MYR5,000 每月
- Diploma or Bachelor's Degree in Mechanical Engineering, Manufacturing, CNC Machining, or a related field.
- Minimum 2–5 years of experience in CNC machining, machine setup, precision manufacturing, or a similar role.
- Strong understanding of CNC machines, machining processes, and equipment commissioning. ...
最后机会申请此工作。
Posted
4 days ago
MYR3,200 - MYR3,600 每月
KL City, WP Kuala Lumpur
靠近火车站
- Diploma or Degree in Engineering, Construction Management, or related field
- Fresh graduates with construction internship are encouraged to apply
- Strong organizational and coordination skills ...
最后机会申请此工作。
Posted
12 days ago
MYR3,000 - MYR4,000 每月
- -Create and optimize CNC programs using CAD/CAM software.
- -Read and interpret complex engineering drawings, blueprints, and 3D CAD models.
- -Determine tooling, cutting paths, feeds, and speeds based on material and part geometry. ...
最后机会申请此工作。
Posted
13 days ago
支持聊天
Precast Production Supervisor
MYR4,000 - MYR6,000 每月
- xperience: Minimum 2–3 years of supervisory experience in precast manufacturing is highly preferred.
- Technical Knowledge: Strong understanding of concrete casting. Ability to read basic engineering/production drawings.
- Leadership Skills: Proven ability to lead, motivate, and distribute tasks effectively among a large team of general workers and operators. ...
Posted
5 days ago
MYR1,700 - MYR3,000 每月
- Proficiently operate CNC milling machines to produce precision parts according to specifications.
- Review work orders and engineering drawings to understand specifications before setting and loading raw materials into the CNC milling machine.
- Set up machines, including work holding, tooling, and offsets, ensuring accurate and efficient operation. ...
最后机会申请此工作。
Posted
13 days ago