70 Tooling Jobs - September 2026 - High Salaries
Showing 70 jobs results for
"tooling"
MYR5,500 - MYR6,500 Per Month
Near Train Station
- Achieve required dimensional accuracy and tight tolerances, including micro-level precision
- Perform and/or oversee CNC machining activities for precision tooling components
- Carry out precision and surface grinding to meet required dimensional and surface-finish specifications ...
Be an early applicant!
Posted
11 days ago
MYR1,700 - MYR2,200 Per Month
- To conduct machinery maintenance activities, including oil level monitoring, coolant top-up, and chip disposal.
- To operate machinery centres in accordance with process instructions.
- To perform machinery setup, cutting processes, part de-burring, and sequence inspection of produced parts. ...
Be an early applicant!
Posted
12 days ago
Undisclosed
- Troubleshoot and resolve issues related to CNC machinery and programs.
- Perform routine maintenance on machines and equipment.
- Train and mentor junior machinists and operators. ...
Posted
13 days ago
MYR2,500 - MYR3,500 Per Month
- Perform quality checks using measurement tools such as calipers and micrometers.
- Monitor machine performance and make necessary adjustments.
- Maintain equipment and perform preventive maintenance. ...
Posted
7 days ago
MYR2,200 - MYR3,000 Per Month
- malfunction
- • Produce required products in accordance to given specifications with a sense of
- quality ownership ...
Posted
a month ago
Machinist (Cnc 3 Axis / Wire Cut)
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
- To understand specifications of the task at hand and the desired result by reading work instruction, engineering drawings, etc.
- To prepare and load raw materials and parts onto the machines.
- To monitor the machines while works in progress and make any necessary adjustments to produce a better result. ...
Posted
16 days ago
CNC Machinist (Mandarin Speaker)
MYR3,000 - MYR4,500 Per Month
- Identify machining defects and report quality issues to QA or supervisors.
- Maintain machines, tools and work areas in good condition.
- Follow production schedules, work instructions and safety requirements. ...
Posted
a day ago
MYR2,000 - MYR2,200 Per Month
Fresh Graduates
- • Ensure tools are correctly assembled and tightened according to specification.
- Tool Presetting
- • Measure tool length and diameter offsets using tool presetting equipment. ...
Posted
14 days ago
Undisclosed
- On time fill up the production document accurately and MES system timely and clearly.
- To ensure production safety & 5S is carried out and maintained.
- Other duties and assignments as instructed by superiors from time to time. ...
Be an early applicant!
Posted
8 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
7 days ago
CNC Machinist Group Leader
Undisclosed
- Set up, operate, and maintain CNC machines to perform precision machining operations.
- Read and interpret engineering drawings, blueprints, and technical documents.
- Inspect and measure finished products to ensure they meet specifications. ...
Be an early applicant!
Posted
a month ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
7 days ago
MYR3,500 - MYR5,000 Per Month
- Select appropriate cutting tools, fixtures, and workholding devices for each machining operation.
- Inspect finished parts using precision measuring instruments (e.g., calipers, micrometers, CMM) to verify conformance to specifications and quality standards.
- Identify and report any defects or deviations from specifications to the engineering or quality control department. ...
Be an early applicant!
Posted
a month ago
MYR5,000 - MYR9,000 Per Month
Bandar Kuala Lumpur, WP Kuala Lumpur
Near Train Station
- Install, maintain, and repair various types of air conditioning systems.
- Troubleshoot, diagnose, and repair air conditioning system faults and technical issues.
- Lead junior technicians, guide site operations, and ensure all work adheres to safety and quality standards.
Posted
a month ago
MYR2,500 - MYR4,500 Per Month
- Perform test runs and make necessary adjustments to ensure dimensional accuracy and surface quality.
- Monitor machine operations and troubleshoot machining issues.
- Optimize cutting parameters to improve productivity and machining efficiency. ...
Be an early applicant!
Posted
4 days ago
MYR2,000 - MYR2,800 Per Month
- Polish mould cavities and cores using appropriate tools and methods.
- Replace damaged or worn mould components (e.g., ejector pins, inserts, bushings).
- Maintain accurate records of mould servicing and repairs. ...
Be an early applicant!
Posted
a month ago
MYR5,000 - MYR8,000 Per Month
- Prepare and control product process documentation.
- ECN (Engineering Change Notice)
- Initiate and handle the ECN (Engineering Change Notice) process, and be responsible for tasks related to product technical changes. ...
Posted
4 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
7 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
7 days ago
SGD1,800 - SGD2,500 Per Month
Singapore, Singapore
- Adjust machining parameters including spindle speed, feed rate, coolant flow, and cutting depth.
- Monitor machining operations and make necessary adjustments to maintain dimensional accuracy.
- Perform in-process inspections using precision measuring instruments such as micrometers, verniers, bore gauges, and dial indicators. ...
Posted
a month ago
Undisclosed
- Establish WI for processes plan / machine Set-up.
- Guide machinist on machine setup, operation as per the program generated.
- Ensure the program and WI of the program is stored and managed properly in the system. ...
Be an early applicant!
Posted
8 days ago
Undisclosed
Bandar Kuala Lumpur, WP Kuala Lumpur
Near Train Station
- Gather requirements from users and turn them into clear specifications before building.
- Manage the project backlog by prioritising requests, aligning with management, and tracking work through to delivery.
- Deploy, monitor, and support live systems, ensuring safe releases, uptime, and fast fixes when issues arise. ...
Posted
12 days ago
MYR4,000 - MYR5,000 Per Month
Near Train Station
- • Troubleshoot molding defects such as:
- o Short shots
- o Flash ...
Posted
a month ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
7 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
7 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
7 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
7 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
7 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
7 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
7 days ago