800+ Quality Assurance Inspector Jobs - June 2026 - High Salaries
search.result_querys_job
"quality assurance inspector"
不要错过任何 Quality Assurance Inspector 的新工作机会
激活工作提醒
工作 "quality assurance inspector"
管理提醒
SGD2,200 - SGD2,200 每月
Singapore
- Taking care of initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
- Responsible for performing proper use and maintenance of gages and inspection equipment.
- Responsible for performing proper documentation including inspection stamping of quality paperwork. ...
Posted
16 days ago
MYR1,700 - MYR2,000 每月
- Complies to the corporate and quality policy requirements.
- Performs any other related tasks as and when required by the Supervisor.
- Secondary / SPM ...
Posted
3 days ago
MYR1,700 - MYR2,000 每月
- Complies to the corporate and quality policy requirements.
- Performs any other related tasks as and when required by the Supervisor.
- Secondary / SPM ...
Posted
3 days ago
Undisclosed
- Check product conformance with drawings, specifications and inspection requirements.
- Recognize and classify non-conforming product.
- Report any unusual observations during the inspection to the QC Officer/Supervisor. ...
Posted
2 days ago
SGD4,000 - SGD4,000 每月
Singapore
- Select appropriate measurement methods for quality inspection
- Create clear measurement work instructions and procedures
- Train QC inspectors on proper measurement techniques ...
Posted
2 days ago
Undisclosed
Malaysia
- You will maintain compliance with operating procedures and ensure training is completed prior to the operation of a task.
- You will ensure all documentation is legible, complete, and correct per current Good Manufacturing Practices Inspect labeling for the finished product.
- You will apply approval or rejection labels to lot/product once inspection data, complete the review of lot history record (LHR). ...
Posted
2 days ago
Undisclosed
Malaysia
- You maintain compliance with operating procedures and ensure training is completed prior to performing any task.
- You ensure all documentation is legible, complete, and correct per current Good Manufacturing Practices and inspect labeling for finished products.
- You apply approval or rejection labels to lots/products after completing inspection data review and lot history record (LHR) verification. ...
Posted
2 days ago
MYR1,800 - MYR2,200 每月
Ampang Jaya Municipal Council
- - Identify and report non-conformances, and assist in corrective and preventive actions (CAPA).
- - Support internal audits and regulatory inspections when required.
- - Ensure proper sample retention, accurate documentation, and product traceability. ...
Posted
3 days ago
SGD2,500 - SGD2,800 每月
Singapore
- Maintain and operate DI water system
- Pre-weight process monitoring and checking
- Responsible for in charge of retention sample, SDS and COA creation and modification ...
Posted
12 days ago
SGD2,600 - SGD3,000 每月
Singapore
- Daily monitoring and checking the accuracy of the done reports by QC team
- Update quality inspection personnel qualifications and training requirements as per assigned by executive and manager
- Revise department's work instructions according to job-flow changes or as per customer requirements ...
Posted
12 days ago
SGD2,800 - SGD3,500 每月
Jurong West
- Prepare quality records and reports on product / project after job completion
- Monitor ISO quality audit with Management Committee
- Prepare documentation for client's approval ...
Posted
12 days ago
Undisclosed
Malaysia
- You maintain compliance with operating procedures and ensure training is completed prior to performing any task.
- You ensure all documentation is legible, complete, and correct per current Good Manufacturing Practices and inspect labeling for finished products.
- You apply approval or rejection labels to lots/products after completing inspection data review and lot history record (LHR) verification. ...
Posted
5 days ago
KHC Spring Corporation (M) Sdn Bhd
MYR1,700 - MYR2,500 每月
Prai
- Identify and record any product defects or non-conformities and report to immediate superior.
- Assist in maintaining calibration of QC equipment.
- Maintain clean and organized inspection records and workspaces. ...
Posted
15 days ago
SGD4,400 - SGD4,400 每月
Singapore
- Inspect incoming materials and equipment against purchase orders, certificates, and specifications.
- Verify traceability, dimensions, heat numbers, and physical condition before acceptance.
- Raise Material Receiving Reports (MRRs) and initiate Non-Conformance Reports (NCRs) if needed. ...
Posted
13 days ago
SGD2,200 - SGD2,200 每月
Singapore
- Taking care of initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
- Responsible for performing proper use and maintenance of gages and inspection equipment.
- Responsible for performing proper documentation including inspection stamping of quality paperwork. ...
Posted
17 days ago
Undisclosed
Malaysia
- Maintaining the proper inspection records related to the parts inspected.
- Responsible to fulfill guideline ISO9001:2015, ISO14001:2015, IATF16949:2016, AS9100:2016.
- To undertake other duties assigned or directed by the superior from time to time. ...
Posted
13 days ago
Undisclosed
Malaysia
- Attention to detail, accuracy in record-keeping, and the ability to follow standardized procedures and work instructions.
- Ability to read and interpret basic technical documents, specifications, or work orders relevant to inspection tasks.
- Previous experience in a manufacturing, printing, or publishing production environment is an advantage. ...
Posted
8 days ago
Undisclosed
Singapore
- Inspect coating activities including surface prep, DFT/WFT, and environmental checks.
- Carry out dimensional control using precision instruments (alignment, tolerances, fit-up).
- Witness pressure testing (hydro/pneumatic) and verify system compliance. ...
Posted
18 days ago
SGD2,500 - SGD2,500 每月
Singapore
- • 8:30am to 5:30pm (Monday to Friday)
- • 8:30pm to 5:30am (Monday to Friday)
- * Able to commit to OT on weekdays, weekends and PH. ...
Posted
9 days ago
MYR1,800 - MYR2,000 每月
- Ensure accuracy in visual inspection using naked eye and/or scanner, reading and writing inspection results.
- Provide outgoing QC report as per customer shipping requirement.
- Conduct inspections on all incoming, in-process and out-going finished products according to SOP and record all the inspection results in the relevant forms. ...
Posted
14 days ago
SGD1,800 - SGD2,500 每月
Singapore
- Keyence 3D Measurement System
- Keyence SmartScope
- Mitutoyo CNC Vision Measuring System ...
Posted
14 days ago
SGD2,200 - SGD2,200 每月
Singapore
- Taking care of initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
- Responsible for performing proper use and maintenance of gages and inspection equipment.
- Responsible for performing proper documentation including inspection stamping of quality paperwork. ...
Posted
18 days ago
SGD2,200 - SGD3,500 每月
Singapore
- Job description
- Responsibilities
- - Require to perform incoming, outgoing and in-process inspections for metal structure. ...
Posted
14 days ago
SGD2,600 - SGD3,000 每月
Tampines
- Food allowance
- Health insurance
- Promotion to permanent employee ...
Posted
14 days ago
MYR1,700 - MYR1,900 每月
Port Klang
- Reporting on the performance of the Quality Management System and on Opportunities For Improvement to the superior (e.g.: Internal Quality Audit, Quality Objective, Risk assessment analysis & etc.)
- To make awareness of customer focus throughout the organization such as customer feedback, customer complaint & etc.)
- To ensure the integrity of the Quality Management System is maintained when changes to the Quality Management System are planned & implemented. ...
Posted
15 days ago
job_search.browse_location:
job_search.more_location
job_search.browse_company:
job_search.more_company
job_search.browse_job_by_title:
job_search.more_industry