100+ Mechanical Knowledge Jobs in Pulau Pinang - September 2026 - High Salaries
Showing 109 jobs results for
"mechanical knowledge"
in Pulau Pinang
MYR1,700 - MYR2,800 Per Month
Fresh Graduates
Bukit Minyak, Pulau Pinang
- Carry out basic plumbing works such as repairing leaking pipes, water taps, and water supply issues.
- Perform welding, cutting, grinding, and basic fabrication works when required.
- Conduct routine inspection of company facilities, equipment, and utilities to identify maintenance issues. ...
Posted
a month ago
Machinist (Cnc 3 Axis / Wire Cut)
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
- To understand specifications of the task at hand and the desired result by reading work instruction, engineering drawings, etc.
- To prepare and load raw materials and parts onto the machines.
- To monitor the machines while works in progress and make any necessary adjustments to produce a better result. ...
Be an early applicant!
Posted
12 days ago
Undisclosed
- Assigning and monitoring maintenance tasks for technicians.
- Supporting technicians during complex maintenance and repair activities.
- Conducting root-cause analysis for repeated breakdowns and major equipment failures. ...
Be an early applicant!
Posted
10 days ago
Undisclosed
- Responding to production maintenance calls within the defined response time.
- Performing basic electrical, mechanical, pneumatic, hydraulic, and control-system troubleshooting, according to competency level.
- Updating maintenance checklists, work orders, repair records, and spare-part usage records. ...
Be an early applicant!
Posted
10 days ago
MYR2,500 - MYR3,400 Per Month
Fresh Graduates
- To install Car Recorder (Dashcam), Tyre Pressure Monitoring System (TPMS), Hardwire Fuse Kit
- Communicate with customer sincerely and in a helpful manner
Posted
2 months ago
MYR4,000 - MYR5,000 Per Month
- To consider correct tools as required to cut the particular materials and to program the machines accordingly.
- To troubleshoot and resolve problems as and when program errors happen.
- To optimize programs and reduce wastage of material. ...
Be an early applicant!
Posted
8 days ago
Undisclosed
- Perform downtime repair and troubleshooting for wirebond machine
- Support engineering and NPI
Be an early applicant!
Posted
a month ago
MYR2,000 - MYR2,800 Per Month
- Assist project teams during project execution.
- Prepare service reports, installation records, and technical documentation.
- Support factory acceptance testing (FAT), site acceptance testing (SAT), and customer training activities. ...
Posted
7 days ago
Undisclosed
Fresh Graduates
- Assist engineers in troubleshooting and resolving assembly-related issues.
- Maintain tools, equipment, and workstations in proper working condition.
- Support continuous improvement initiatives for production and assembly processes.
Posted
9 days ago
MYR1,900 - MYR2,500 Per Month
- Machine Logs: Record all details of machine repairs, component replacements, and servicing dates for ISO audits.
- Panel Saw Upkeep: Maintain the main panel saw by checking alignment, lubricating tracks, and keeping cuts accurate.
- Small Machinery Care: Perform routine cleaning and basic servicing on table saws, chop saws, miter saws, drillers, Foam saw, and CNC. ...
Be an early applicant!
Posted
a month ago
Quality Assurance (QA) Manager
MYR5,000 - MYR7,000 Per Month
- Review and monitor inspection reports, quality records, and production quality performance.
- Handle customer complaints, non-conformities, and quality issues.
- Lead CAPA, 8D, Root Cause Analysis, 5 Why, and corrective/preventive actions. ...
Posted
9 hours ago
Undisclosed
- Service, trouble shoot and repair machines / equipment & report major problems and emergencies to Superior with appropriate recommendations.
- Review of workshops spare parts inventories & initiates / raise purchase requisition.
- Ensure the cleanliness of workshop is maintained to the highest level at all time. ...
Posted
a month ago
Undisclosed
Be an early applicant!
Posted
4 days ago
MYR2,000 - MYR2,800 Per Month
+Additional Compensation
- Perform other repair works in the unit as required.
- Ensure all tasks are carried out professionally, ethically, and in a timely manner.
- Perform any other duties and responsibilities assigned by the management. ...
Be an early applicant!
Posted
14 days ago
Marketing & Engineering
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Estimate machining processes, material requirements, tooling and other production costs.
- Prepare and submit quotation and costing to customers.
- Liaise with customers to clarify drawings, technical requirements and quotation details. ...
Posted
a day ago
MYR3,500 - MYR5,000 Per Month
- Precision Tool Grinding: Grind high-precision punch, reamers and custom micro-tools from solid carbide or HSS blanks.
- Wheel Profile Dressing: Select, mount, and dress diamond and CBN wheel packs. Measure and input wheel qualification data into the CNC controller.
- In-Process Quality Control: Perform first-article and in-process inspections using ultra-precision metrology equipment (e.g. profile projectors, laser micrometers) to guarantee tolerances down to the micron level. ...
Posted
11 days ago
Undisclosed
- On time fill up the production document accurately and MES system timely and clearly.
- To ensure production safety & 5S is carried out and maintained.
- Other duties and assignments as instructed by superiors from time to time. ...
Be an early applicant!
Posted
4 days ago
Undisclosed
- Establish WI for processes plan / machine Set-up.
- Guide machinist on machine setup, operation as per the program generated.
- Ensure the program and WI of the program is stored and managed properly in the system. ...
Be an early applicant!
Posted
4 days ago
Undisclosed
- To ensure the production processes are well controlled on process times, cycle time and material usage.
- To lead production machinists and coordinate failure quality issue for root cause analysis, correction and preventive actions.
- To ensure the production safety and 5S is documentation (WI) implemented and reviewed from time to time for the machinist to follow. ...
Be an early applicant!
Posted
4 days ago
MYR5,000 - MYR7,000 Per Month
- Performs proper filing and documentation of engineering records.
- Liaises with other departments on design-related issues and implements corrective measures to prevent recurrence.
- Undertakes other design-related duties assigned by the immediate superior. ...
Be an early applicant!
Posted
3 hours ago
MYR5,000 - MYR7,000 Per Month
- Performs proper filing and documentation of engineering records.
- Liaises with other departments on design-related issues and implements corrective measures to prevent recurrence.
- Undertakes other design-related duties assigned by the immediate superior. ...
Be an early applicant!
Posted
3 hours ago
MYR5,000 - MYR7,000 Per Month
- Performs proper filing and documentation of engineering records.
- Liaises with other departments on design-related issues and implements corrective measures to prevent recurrence.
- Undertakes other design-related duties assigned by the immediate superior. ...
Be an early applicant!
Posted
3 hours ago
MYR5,000 - MYR7,000 Per Month
- Performs proper filing and documentation of engineering records.
- Liaises with other departments on design-related issues and implements corrective measures to prevent recurrence.
- Undertakes other design-related duties assigned by the immediate superior. ...
Be an early applicant!
Posted
3 hours ago
MYR5,000 - MYR7,000 Per Month
- Performs proper filing and documentation of engineering records.
- Liaises with other departments on design-related issues and implements corrective measures to prevent recurrence.
- Undertakes other design-related duties assigned by the immediate superior. ...
Be an early applicant!
Posted
3 hours ago
MYR2,000 - MYR2,500 Per Month
George Town, Pulau Pinang
- Execute general building maintenance tasks, including carpentry, painting, and minor structural repairs, to preserve the aesthetic appeal and structural integrity of the property.
- Implement and manage preventive maintenance schedules for all building systems and equipment, identifying potential issues before they lead to costly breakdowns.
- Adhere strictly to all safety procedures and regulations, including the proper use of tools and equipment, and participate in safety training sessions. ...
Be an early applicant!
Posted
3 days ago
MYR3,200 - MYR3,800 Per Month
- Handle general production issues and worker-related matters on the production floor.
- Assist with mould installation, mould removal and mould changeover.
- Assist with new product and new mould trials. ...
Posted
15 days ago
MYR4,000 - MYR5,500 Per Month
+Additional Compensation
- Track raw material usage, finished goods inventory, and manufacturing yields closely, identifying variance drivers and implementing continuous improvement initiatives to reduce waste, control utility consumption, and optimize production costs.
- Enforce a strong safety culture by ensuring operators comply with Environment, Health, and Safety (EHS) guidelines, conduct safety briefings, manage shift rosters, and provide on-the-job training for production operators.
- The Production Executive is responsible for overseeing the daily manufacturing operations of the poultry feedmill to ensure safe, efficient, and high-quality feed production. The role directs manufacturing processes, optimizes resource utilization, maintains strict compliance with feed safety, biosecurity, and environmental regulations, and coordinates closely with maintenance, quality control, and supply chain teams to meet production targets cost-effectively. ...
Posted
4 days ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Interfaces with personnel on production, QA and other support groups regarding product/process related problems and disposition.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Posted
a month ago
Senior Process Engineer
MYR8,000 - MYR10,500 Per Month
+Additional Compensation
- Introduction of new products and build new processes (BOM).
- Properly prepare technical documents, improve and standardize the process flow, and implement it after approval.
- Provide timely guidance, processing, coordination and resolution of technical problems arising from products. ...
Posted
4 days ago
Undisclosed
- Monitoring on hold lot disposition and provide communication with engineer in order to not impact daily assembly output.
- Maintain all housekeeping / 5s engineering station and tooling’s, to ensure compliance to safety rules.
- Monitor all processes, resolve all products issues and coordinate with production and equipment to reduce downtime and getting better product quality. ...
Posted
a month ago