200+ Pulau Pinang Jobs - October 2026 - Latest Jobs
Showing 216 jobs results
in Pulau Pinang
MYR3,500 - MYR6,000 Per Month
- Prepare quotations and follow up with customers until closing.
- Maintain good relationships with existing customers and develop opportunities for continuous business.
- Develop new customers, mainly focusing on factories and industrial customers. ...
Be an early applicant!
Posted
a day ago
MYR2,300 - MYR3,000 Per Month
+Additional Compensation
- Pack acrylic material into flasks under supervision.
- Remove processed dentures from flasks and assist with basic trimming and cleaning.
- Check work carefully to ensure denture cases are prepared correctly and meet the required standards. ...
Be an early applicant!
Posted
10 hours ago
MYR3,500 - MYR6,000 Per Month
- Prepare quotations and follow up with customers until closing.
- Maintain good relationships with existing customers and develop opportunities for continuous business.
- Develop new customers, mainly focusing on factories and industrial customers. ...
Posted
9 days ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform Assembly fixture daily cleaning cycle per Work Instruction
- Perform 5S at Assembly Work Benches before start of Shift work.
- Organized Assembly tools and equipment per standard for before and after used. ...
Be an early applicant!
Posted
a day ago
MYR1,950 - MYR2,150 Per Month
Fresh Graduates
Be an early applicant!
Posted
a day ago
MYR2,200 - MYR2,500 Per Month
Fresh Graduates
- • Generating detailed failure analysis reports as required.
- • Assisting in failure analysis, troubleshooting, and repair of non-conforming products to determine root causes.
- • Reading schematics, assembly drawings, and data sheets to perform tests, build fixtures, and troubleshoot equipment. ...
Be an early applicant!
Posted
a day ago
MYR2,300 - MYR3,500 Per Month
- Handle customer complaints and internal quality issues, including conducting root cause analysis and implementing corrective actions.
- Participate in New Product Introduction (NPI)meetings and develop and establish appropriateQuality Plans (QP).
- Provide technical support for Product Certification (PC), PPS, and the preparation and formatting of Load and Compression Test requirements and results. ...
Be an early applicant!
Posted
20 days ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- - To inspect by operating a Coordinate Measuring Machine (CMM)
- - To perform Incoming Inspection, In-Process Inspection and Final Outgoing Quality Inspection of products as per specification.
- - To make recommendation on approval and disapproval of inspection results. ...
Posted
7 days ago
Undisclosed
- Daily job arrangement, resources allocation, utilization and capacity planning.
- Coverage area include in-process and out-going inspection (Follow site).
- Work with QA engineer to define the inspection flows and inspection instruction. ...
Be an early applicant!
Posted
a month ago
MYR4,000 - MYR5,000 Per Month
- Align with business order demands, synchronize production schedules and delivery cycles, timely update delivery changes and order abnormalities to ensure stable customer delivery.
- Sort and statistics production, delivery and material data, prepare daily, weekly and monthly reports to provide data support for production optimization and capacity improvement.
- Cooperate with production, quality and process departments to handle production abnormalities, rework and shutdown issues, optimize scheduling logic, and reduce delivery delays and capacity waste. ...
Posted
4 days ago
Undisclosed
Be an early applicant!
Posted
a month ago
MYR4,000 - MYR5,000 Per Month
- To consider correct tools as required to cut the particular materials and to program the machines accordingly.
- To troubleshoot and resolve problems as and when program errors happen.
- To optimize programs and reduce wastage of material. ...
Be an early applicant!
Posted
a month ago
MYR5,000 - MYR6,000 Per Month
- Process Quality Supervision: Monitor production operators to ensure standardized operations and compliance with quality requirements.
- Inspection Management & Data Reporting: Maintain daily, weekly, and monthly quality inspection data, including pass rate, defect rate, and abnormality rate, and prepare quality reports.
- Quality Improvement: Participate in quality improvement activities and work with Process Engineering and QA teams to reduce defects and recurring quality issues. ...
Posted
4 days ago
MYR3,000 - MYR4,500 Per Month
- Monitor machine operations to ensure smooth production and prevent defects.
- Ensure cutting accuracy and product quality meet customer specifications.
- Inspect finished parts using measuring tools (vernier caliper, ruler, etc.). ...
Be an early applicant!
Posted
a month ago
Quality Specialist (QA/QC) (Mandarin Speaker)
Undisclosed
- Meticulous, detail-oriented, and strong in maintaining quality standards and principles. Familiar with factory quality control practices and processes. Candidates with experience in new energy automotive components or precision component quality control will have an added advantage.
- Able to independently perform dimensional inspections, visual inspections, and record inspection data.
- Able to liaise directly with customers on quality-related matters, including customer audits, quality inquiries, and on-site audits. Proficient in preparing 8D reports, quality abnormality reports, corrective action reports, and following up to ensure effective closure. ...
Be an early applicant!
Posted
a month ago
MYR4,500 - MYR6,500 Per Month
- Generate material requirements based on production schedules and ensure sufficient raw materials and components are available.
- Coordinate closely with Production, Purchasing, Warehouse, Quality, Engineering and Sales teams.
- Monitor the availability and delivery status of purchased materials and components. ...
Posted
a month ago
MYR1,950 - MYR2,150 Per Month
Fresh Graduates
- Mematuhi prosedur keselamatan
- Merekod data pengeluaran
- Menjalankan aktiviti pemasangan dan pembungkusan ...
Posted
19 days ago
MYR2,500 - MYR3,000 Per Month
Fresh Graduates
- Keep the work station clean and follow basic safety rules on the factory floor.
- Cut, bend, shape, and assemble PFA plastic tubing according to customer orders and technical drawings.
- Operate simple production tools, machines, and heating equipment safely. ...
Posted
23 days ago
MYR2,800 - MYR3,500 Per Month
Fresh Graduates
- * Achieve daily target output set by Supervisor.
- * To assist on the continual process improvement.
- * Work under the guidance of Supervisor to perform and complete the assigned duties in timely manner. ...
Posted
a month ago
MYR1,950 - MYR2,150 Per Month
Posted
21 days ago
MYR2,800 - MYR4,000 Per Month
+Additional Compensation
- Maintains a positive, professional attitude when working with dentists and teammates.
- Is open to learning and improving, whether refining classic techniques or exploring digital workflows.
- Fabricate complete and partial dentures with strong attention to fit, aesthetics, and durability. ...
Be an early applicant!
Posted
16 days ago
MYR2,000 - MYR2,800 Per Month
+Additional Compensation
George Town, Pulau Pinang
- Achieve individual and team sales targets
- Arrange and display merchandise neatly according to brand guidelines
- Ensure boutique area is clean, organized, and visually attractive ...
Posted
a month ago
Undisclosed
Fresh Graduates
- Issue raw materials to production based on production order requisition
- Maintain first-in-first out (FIFO) system
- Monitor slow-moving, non-moving and obsolete goods ...
Posted
7 days ago
MYR3,000 - MYR4,000 Per Month
Fresh Graduates
- Process Monitoring & Adjustment: Monitor production progress and key performance metrics to identify bottlenecks, delays, or inefficiencies. Analyze data and implement timely schedule adjustments or corrective actions as needed.
- Reporting & Compliance: Maintain accurate production and inventory reports, providing regular updates to management on schedule status, capacity utilization, and production efficiency. Ensure planning activities align with quality standards, company policies, and regulatory requirements.
- Continuous Improvement: Support and participate in process improvement initiatives aimed at optimizing production efficiency and reducing costs. Contribute to the development of contingency plans and strategies for handling equipment failures or production disruptions. ...
Posted
a month ago
MYR1,950 - MYR2,150 Per Month
Fresh Graduates
- Mematuhi prosedur keselamatan
- Merekod data pengeluaran
- Menjalankan aktiviti pemasangan dan pembungkusan ...
Posted
a month ago
MYR1,700 - MYR2,000 Per Month
- Conduct finished product and final outgoing inspections.
- Complete QC inspection records.
- Identify, label and segregate non-conforming products. ...
Posted
a month ago
MYR1,900 - MYR2,500 Per Month
Fresh Graduates
- Maintain 5S at the working area
- Follow tasks and procedures specified in the Quality Management System (QMS)
- Perform other duties assigned by the superior ...
Posted
a month ago
Senior Production Planner
MYR6,000 - MYR8,000 Per Month
- To plan, prioritize and sequence production orders based on customer priorities, material availability, machine capacity and production constraints.
- To balance production demand with available manpower, machine capacity and material availability to achieve optimum resource utilization and on-time delivery.
- To coordinate and monitor production workflow across all departments to ensure jobs are completed according to schedule and committed delivery dates. ...
Posted
a month ago
MYR2,500 - MYR4,000 Per Month
- Monitor work progress and adjust schedules to handle urgent orders or delays
- Optimize machine utilization, manpower allocation, and workflow efficiency
- Ensure on-time delivery commitments to customers are met ...
Posted
a month ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform electrical validationincludingunpowered IV curve and Time-Domain Reflectometry (TDR) to identify failing areas.
- Utilize CSAM, X-ray imaging, and material analysis tools for defect detection.
- Carry out visual inspection using microscopes to identify defects on product substrates. ...
Be an early applicant!
Posted
a month ago