Jobs
Companies
Forums
300+ Fabrication Jobs - July 2026 - High Salaries
Showing 302 jobs results for
"fabrication"
Never miss any updates for Fabrication jobs
Manage Alert
Undisclosed
Singapore
- Ensure process routing is ready for both the first article and volume production.
- Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
- Monitor process performance (quality, cost, lead time) and yield using tools (e.g. SPC). ...
Posted
22 days ago
SGD1,800 - SGD2,500 Per Month
Pasir Ris
- Complying with service standards, work instructions and customers' requirements.
- Assisting with customers' queries.
- Nitec/Higher Nitec in any Engineering/Electronics discipline ...
Posted
18 days ago
SGD2,500 - SGD2,500 Per Month
Singapore
- Arrange site measurements, delivery schedules, and installation activities where required.
- Monitor project progress, identify potential issues or delays, and coordinate timely resolutions with relevant stakeholders.
- Provide regular project updates and progress reports to management and customers. ...
Posted
18 days ago
Research Engineer II (Semiconductor Fabrication (Heterogeneous Integrated Photonics)) Research Engineer II (Semiconductor Fabrication (Heterogeneous Integrated Photonics))
Nanyang Technological University Singapore
Undisclosed
Singapore
- Master's degree (MSc/MEng) in Electrical and Electronic Engineering (EEE), Materials Science, Applied Physics, Optical/Photonic Engineering, or a related field.
- At least 2 years of relevant hands-on cleanroom and micro-/nano-fabrication experience with semiconductor, photonic or optoelectronic devices (project experience may also be considered).
- Practical experience with lithography and dry etching (e-beam/DUV/i-line, ICP-RIE/RIE) including CD control, and with thin-film deposition and metallization (PECVD/LPCVD, sputtering, ALD, e-beam evaporation, lift-off, annealing). ...
Posted
a day ago
SGD4,000 - SGD4,000 Per Month
Singapore
- Master's degree (MSc/MEng) in Electrical and Electronic Engineering (EEE), Materials Science, Applied Physics, Optical/Photonic Engineering, or a related field.
- At least 2 years of relevant hands-on cleanroom and micro-/nano-fabrication experience with semiconductor, photonic or optoelectronic devices (project experience may also be considered).
- Practical experience with lithography and dry etching (e-beam/DUV/i-line, ICP-RIE/RIE) including CD control, and with thin-film deposition and metallization (PECVD/LPCVD, sputtering, ALD, e-beam evaporation, lift-off, annealing). ...
Posted
10 days ago
Undisclosed
Western Water Catchment
- Run core process modules: e-beam/DUV/i-line lithography and ICP-RIE/RIE etch; PECVD/LPCVD, sputtering, ALD and e-beam deposition, lift-off, metallization and annealing — with CD control under the Center Director's direction.
- Perform heterogeneous integration and bonding (plasma-activated/adhesive/eutectic wafer-die bonding, substrate thinning/CMP, advanced packaging).
- Requirements: ...
Posted
11 days ago
Research Engineer II (Semiconductor Fabrication (Heterogeneous Integrated Photonics)) Research Engineer II (Semiconductor Fabrication (Heterogeneous Integrated Photonics))
Nanyang Technological University Singapore
Undisclosed
Singapore
- Master's degree (MSc/MEng) in Electrical and Electronic Engineering (EEE), Materials Science, Applied Physics, Optical/Photonic Engineering, or a related field.
- At least 2 years of relevant hands-on cleanroom and micro-/nano-fabrication experience with semiconductor, photonic or optoelectronic devices (project experience may also be considered).
- Practical experience with lithography and dry etching (e-beam/DUV/i-line, ICP-RIE/RIE) including CD control, and with thin-film deposition and metallization (PECVD/LPCVD, sputtering, ALD, e-beam evaporation, lift-off, annealing). ...
Posted
11 days ago
SGD1,800 - SGD1,800 Per Month
Singapore
- Join our team and gain hands-on experience in transforming raw materials into exquisite kitchen, table, vanity tops etc.
Posted
a month ago
Instamedia Premium Solution Sdn Bhd
MYR800 - MYR1,200 Per Month
KL City
- • Design and 3D print parts for booth fixtures, props, and protective housings
- • Prototype components for hardware projects (e.g. sensor enclosures, mounting rigs)
- • Support fabrication for bespoke flagship installations — cutting, assembly, finishing ...
Posted
a month ago
SGD3,200 - SGD3,200 Per Month
Singapore
- Build and maintain strong relationships with clients while managing projects independently.
- Manage the entire sales process, from lead generation and customer engagement to quotation, negotiation, and project handover.
- Collaborate closely with internal teams to ensure smooth project execution and customer satisfaction. ...
Posted
12 days ago
THE SUPREME HR ADVISORY PTE. LTD.
SGD3,000 - SGD3,000 Per Month
Singapore
- Full time
- Prepare detailed cost estimates, quotations, and Bills of Quantities (BoQ) based on metal fabrication drawings to support project budgeting and execution. Manage quantity take-offs and cost control for materials, labor, and project timelines to ensure financial accuracy and efficiency.
- Prepare accurate cost estimates, quotations, and Bills of Quantities (BoQ) from metal fabrication drawings to support project planning and budgeting ...
Posted
a month ago
R-D Scientist (Surface Treatment and Micro-Nano Fabrication) R-D Scientist (Surface Treatment and Micro-Nano Fabrication)
HONGKONG FIELD ENTERPRISE LIMITED
Undisclosed
Port Klang
- Support bending qualification and production validation activities
- Coordinate technical clarification with customer engineering personnel when required
- Supervise day-to-day tube fabrication and bending activities ...
Posted
a month ago
SGD3,500 - SGD3,500 Per Month
Singapore
- · Prepare Material Take-Off (MTO) lists and coordinate vendor selection with procurement
- · Plan and arrange resources for project execution
- · Develop inspection plans with QA/QC and coordinate third-party inspections ...
Posted
3 days ago
SGD3,500 - SGD3,500 Per Month
Singapore
- · Read and interpret construction drawings, shop drawings and bar bending schedules
- · Ensure timely completion of rebar works according to approved drawings
- · Plan ahead and manage critical activities involving materials, manpower and equipment ...
Posted
10 hours ago
Undisclosed
- Perform conventional lathe, surface grinding and cylindrical grinding operations for tooling components.
- Conduct die try-outs, fitting and alignment checks; carry out tool modifications and adjustments based on try-out results.
- Diagnose and troubleshoot die/tooling failures; perform corrective repairs and implement preventive improvements. ...
Posted
a month ago
SGD4,200 - SGD4,200 Per Month
Singapore
- Work on hands-on experiments for few of the following tasks:1. Design, Simulation, and Fabrication of Piezoelectric MEMS resonators; filters and sensors 2. Design, modelling and testing of neural networks aiming for human-machine-interface3.Write 1 or more research papers based on derived data of the above devices in the first year in the top-notch journals4.Supporting and guiding the experiments of FYP students
- Have learned Piezoelectric MEMS resonators; filters and sensors related courses for one semester at post-graduate level and earned score of A- or better.2. Strong background in hands-on microfabrication techniques at clean room and with journal publications showing such evidences3. With 2 years and more experience in making and testing MEMS devices4. With 1 year and more working experience in MEMS and Photonics design5. Strong knowledge in L-Edit; Lumerical; CST; COMSOL; ANSYS; 6. Fluent in English speaking and writing7. Having more than 1 1st-authored international peer-reviewed journal papers, e.g., Nature Communications and Science Advances (for Research Engineer)
Posted
a month ago
Undisclosed
- Perform conventional lathe, surface grinding and cylindrical grinding operations for tooling components.
- Conduct die try-outs, fitting and alignment checks; carry out tool modifications and adjustments based on try-out results.
- Diagnose and troubleshoot die/tooling failures; perform corrective repairs and implement preventive improvements. ...
Posted
a month ago
Undisclosed
- Perform conventional lathe, surface grinding and cylindrical grinding operations for tooling components.
- Conduct die try-outs, fitting and alignment checks; carry out tool modifications and adjustments based on try-out results.
- Diagnose and troubleshoot die/tooling failures; perform corrective repairs and implement preventive improvements. ...
Posted
a month ago
SGD2,200 - SGD2,200 Per Month
Singapore
- Carry out troubleshooting and repairs of equipment to reduce downtime and ensure smooth operations
- Conduct preventive maintenance, calibrations, minor repairs, and assist in troubleshooting to minimize downtime.
- Minimum NITEC in any Engineering field, or equivalent certification. ...
Posted
14 days ago
MYR1,900 - MYR2,300 Per Month
Port Klang
- Proficient in Microsoft Excel, Word, and other Microsoft Office applications.
- Able to work independently and as part of a team.
- Perform other administrative and warehouse-related duties assigned by the Warehouse Supervisor or Manager. ...
Posted
14 hours ago
Undisclosed
- Respond to audience feedback and inquiries in a professional and engaging manner.
- Monitor live performance metrics and analyze data to improve engagement and conversion rates.
- Stay updated with the latest social media trends and platform algorithms. ...
Posted
6 days ago
Undisclosed
- Respond to audience feedback and inquiries in a professional and engaging manner.
- Monitor live performance metrics and analyze data to improve engagement and conversion rates.
- Stay updated with the latest social media trends and platform algorithms. ...
Posted
6 days ago
Undisclosed
Singapore
- PAU & PAR
- EPC of Process / Gas facilities & compression stations
- FPSO / MOPU / FPU topsides modules fabrication ...
Posted
11 days ago
SGD3,000 - SGD3,000 Per Month
Singapore
- PAU & PAR
- EPC of Process / Gas facilities & compression stations
- FPSO / MOPU / FPU topsides modules fabrication ...
Posted
11 days ago
SGD4,000 - SGD4,000 Per Month
Singapore
- - Define scope of supply, battery limits, and exclusions in line with Wasco standards.
- - Prepare cost estimates for E-House structure, architecture, HVAC, fire & gas, cables, installation, and testing.
- - Obtain and evaluate quotes from vendors/subcontractors for electrical HVAC, F&G etc. ...
Posted
11 days ago
SGD7,000 - SGD7,000 Per Month
Singapore
- • To administer, coordinate and review letters of support and other ad hoc agreements such as representative, distributorship and co-operative agreements.
- • Establish and maintain strong business relationships with customers and suppliers including effectively managing contract enquiries, issues, disputes, variations, and risks; and develop and execute negotiation strategies with customers and suppliers as required to minimize potential losses and maximize profits for the company.
- • Work together with Project Management Teams to review contractual matters of the projects, draft and review contract letters, variation orders, settlement agreements and execute meetings and negotiation alongside with Project Management Teams to manage contract variations, disputes, risks, etc. ...
Posted
11 days ago
Job searches related to “Fabrication”
Browse Location:
More Location
Browse Company:
More Companies
Browse "fabrication" Job By:
Browse "fabrication" Job By:
More Industries