76 CNC Milling Jobs in Malaysia | Job Vacancies | September 2026 | Ricebowl
Showing 76 jobs results for
"cnc milling"
MYR2,500 - MYR4,500 Per Month
- Perform test runs and make necessary adjustments to ensure dimensional accuracy and surface quality.
- Monitor machine operations and troubleshoot machining issues.
- Optimize cutting parameters to improve productivity and machining efficiency. ...
Be an early applicant!
Posted
2 days ago
MYR2,000 - MYR3,000 Per Month
- Monitor machine operations and ensure finished products meet required specifications.
- Perform dimensional and quality checks on completed workpieces.
- Perform basic troubleshooting and routine machine maintenance. ...
Be an early applicant!
Posted
2 days ago
MYR4,000 - MYR7,000 Per Month
Fresh Graduates
Near Train Station
- Monitor machine performance and make necessary adjustments during operation
- Collaborate with production teams to optimize machining processes and improve efficiency
- Capable to use precision measuring tools ...
Posted
12 days ago
MYR2,000 - MYR3,000 Per Month
- Monitor machine operations and ensure finished products meet required specifications.
- Perform dimensional and quality checks on completed workpieces.
- Perform basic troubleshooting and routine machine maintenance. ...
Be an early applicant!
Posted
2 days ago
MYR2,500 - MYR3,500 Per Month
- Perform quality checks using measurement tools such as calipers and micrometers.
- Monitor machine performance and make necessary adjustments.
- Maintain equipment and perform preventive maintenance. ...
Posted
5 days ago
MYR3,000 - MYR5,000 Per Month
Fresh Graduates
- Support machine setup and troubleshoot programming issues.
- Modify and update CNC programs when required.
- Conduct first article verification before production. ...
Posted
6 days ago
Undisclosed
- Troubleshoot and resolve issues related to CNC machinery and programs.
- Perform routine maintenance on machines and equipment.
- Train and mentor junior machinists and operators. ...
Posted
11 days ago
Machinist (Cnc 3 Axis / Wire Cut)
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
- To understand specifications of the task at hand and the desired result by reading work instruction, engineering drawings, etc.
- To prepare and load raw materials and parts onto the machines.
- To monitor the machines while works in progress and make any necessary adjustments to produce a better result. ...
Be an early applicant!
Posted
14 days ago
Undisclosed
- On time fill up the production document accurately and MES system timely and clearly.
- To ensure production safety & 5S is carried out and maintained.
- Other duties and assignments as instructed by superiors from time to time. ...
Be an early applicant!
Posted
6 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
5 days ago
MYR2,200 - MYR3,000 Per Month
- malfunction
- • Produce required products in accordance to given specifications with a sense of
- quality ownership ...
Posted
a month ago
MYR2,000 - MYR2,300 Per Month
- Melakukan pembersihan dan penyelenggaraan rutin terhadap peralatan powder coating.
- Memastikan kawasan kerja bersih serta mematuhi peraturan keselamatan.
- Membantu dalam kerja pembungkusan, pemuatan dan tugasan sokongan pengeluaran apabila diperlukan. ...
Be an early applicant!
Posted
2 months ago
MYR1,800 - MYR2,300 Per Month
- Mengendalikan dan memantau mesin CNC Turret Punch serta Mesin Bending.
- Memastikan mesin beroperasi dengan lancar dan mengenal pasti sebarang masalah semasa operasi.
Be an early applicant!
Posted
2 months ago
Undisclosed
- Responding to production maintenance calls within the defined response time.
- Performing basic electrical, mechanical, pneumatic, hydraulic, and control-system troubleshooting, according to competency level.
- Updating maintenance checklists, work orders, repair records, and spare-part usage records. ...
Be an early applicant!
Posted
12 days ago
MYR5,500 - MYR6,500 Per Month
Near Train Station
- Achieve required dimensional accuracy and tight tolerances, including micro-level precision
- Perform and/or oversee CNC machining activities for precision tooling components
- Carry out precision and surface grinding to meet required dimensional and surface-finish specifications ...
Be an early applicant!
Posted
9 days ago
Undisclosed
- On time fill up the production document accurately and MES system timely and clearly.
- To ensure production safety & 5S is carried out and maintained.
- Other duties and assignments as instructed by superiors from time to time. ...
Be an early applicant!
Posted
6 days ago
Undisclosed
- Establish WI for processes plan / machine Set-up.
- Guide machinist on machine setup, operation as per the program generated.
- Ensure the program and WI of the program is stored and managed properly in the system. ...
Be an early applicant!
Posted
6 days ago
MYR800 - MYR1,300 Per Month
Fresh Graduates
Near Train Station
- Assist in adjusting machine settings to ensure product accuracy
- Help clean and maintain machines to ensure consistent performance
- Communicate with supervisors and machinists on daily production tasks and progress ...
Be an early applicant!
Posted
10 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
5 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
5 days ago
MYR2,000 - MYR4,000 Per Month
Near Train Station
- Design machining process by studying customer requirement on engineering plans, materials, specifications, drawings, machining parameters etc.
- Support first run and start-up of CNC Programs.
- Assist and supervise troubleshooting program errors. ...
Be an early applicant!
Posted
5 days ago
MYR800 - MYR1,300 Per Month
Fresh Graduates
Near Train Station
- Assist in adjusting machine settings to ensure product accuracy
- Help clean and maintain machines to ensure consistent performance
- Communicate with supervisors and machinists on daily production tasks and progress ...
Be an early applicant!
Posted
10 days ago
MYR5,000 - MYR6,000 Per Month
Tebrau, Johor
- Job Scope:
- Offer technical support and advise to customers on operating & maintain the machines.
- Setup and Commission CNC Mill, CNC Turn machines at customer’s place ...
Posted
a month ago
MYR2,000 - MYR2,200 Per Month
Fresh Graduates
- • Ensure tools are correctly assembled and tightened according to specification.
- Tool Presetting
- • Measure tool length and diameter offsets using tool presetting equipment. ...
Posted
12 days ago
MYR3,500 - MYR5,000 Per Month
- Select appropriate cutting tools, fixtures, and workholding devices for each machining operation.
- Inspect finished parts using precision measuring instruments (e.g., calipers, micrometers, CMM) to verify conformance to specifications and quality standards.
- Identify and report any defects or deviations from specifications to the engineering or quality control department. ...
Be an early applicant!
Posted
25 days ago
Up to MYR4,500 Per Month
Near Train Station
- Perform 2D and 3D programming using CAM software when required.
- Monitor machining processes and ensure finished products meet quality requirements.
- Inspect finished parts using precision measuring tools. ...
Posted
a month ago
MYR2,500 - MYR3,500 Per Month
- Continuously monitor the quality and yield of the operations and take corrective and preventive actions to ensure conformance.
- To ensure that all necessary fixtures, tools and related items for initial run are correctly set-up, using the given tool list.
- Support test cuts on new project (FA) and initial run parts. Ensure the correct NC program, Jigs fixture, Tools list and tool table are properly loaded at the appropriate machine to produce the correct part before the start production. ...
Posted
18 days ago
MYR2,800 - MYR6,000 Per Month
Near Train Station
- Monitor operations, troubleshoot issues, and prevent defects.
- Maintain tools, measuring instruments, and a safe, organized workspace.
- Collaborate with the production team to meet daily targets. ...
Posted
10 days ago
MYR4,000 - MYR8,000 Per Month
Tebrau, Johor
- Work closely with the sales team to achieve sales targets.
- Setup and Commission CNC Mill, CNC Turn machines at customer’s place
- Able to perform CNC programming and interpret technical drawing ...
Posted
a month ago
SGD1,800 - SGD2,500 Per Month
Singapore, Singapore
- Adjust machining parameters including spindle speed, feed rate, coolant flow, and cutting depth.
- Monitor machining operations and make necessary adjustments to maintain dimensional accuracy.
- Perform in-process inspections using precision measuring instruments such as micrometers, verniers, bore gauges, and dial indicators. ...
Posted
a month ago