100+份Electronics Engineering工作在Pulau Pinang - September 2026
显示103个工作的结果
"electronics engineering"
在 Pulau Pinang
MYR2,500 - MYR3,300 每月
- Bachelor’s Degree in Electrical & Electronics Engineering or related field
- Minimum 1-3 years of experience
- Understanding of electronic test procedures and specifications ...
Posted
2 months ago
MYR2,100 - MYR4,000 每月
Fresh Graduates
- Diploma or Equivalence qualification in Electronic or Mechatronic
- Punctuality and good working attitude.
- Must be willing to work on rotating shift and night shift when required. ...
最后机会申请此工作。
Posted
5 days ago
MYR2,200 - MYR2,500 每月
+额外补偿
Fresh Graduates
- Technician or Freshie from Diploma / Degree Electrical or Electronic or Mechatronic
- Excellent working knowledge of semiconductor manufacturing equipment, especially RF Matching Networks and Generators
- Able to work on shift ...
最后机会申请此工作。
Posted
18 days ago
Undisclosed
- Experienced in AOI process and able to perform troubleshooting, set-up, conversion and recipe creation.
- Employment Type : Full time
- Fluent in English, and Bahasa Malaysia. ...
Posted
a month ago
MYR1,700 - MYR2,500 每月
- Carry out installation, upgrade, maintenance, testing and commissioning works at site as assigned.
- Perform troubleshooting and corrective works for CCTV systems and related equipment.
- Support site activities according to project schedules and requirements. ...
-Willing and able to travel between project sites within the Northern Zone.
-Willing to work after hours
+4
最后机会申请此工作。
Posted
16 days ago
MYR2,300 - MYR2,500 每月
- Minimum SPM, Certificate, Diploma, or equivalent qualification in Electronics, Electrical or a related field.
- Basic knowledge of electronic components, wiring, and electrical systems.
- Experience in electronic repair, troubleshooting, or maintenance is an advantage. ...
Posted
a month ago
MYR2,200 - MYR2,500 每月
Fresh Graduates
- Diploma- Electronics Engineering/Electrical Engineering/Mechatronics Engineering/Mechanical Engineering/Industrial Technology/ Or a related technical discipline
- Willing to work shift
- Proficiency in English ...
最后机会申请此工作。
Posted
12 days ago
Undisclosed
- Diploma/Certificate in Electrical, Electronics, Mechanical Engineering, Mechatronics, or a related field.
- Basic knowledge of electrical, mechanical, pneumatic, and automation systems.
- Able to perform equipment installation, setup, preventive maintenance, and troubleshooting. ...
最后机会申请此工作。
Posted
12 days ago
MYR4,500 - MYR6,500 每月
- Diploma or Bachelor's Degree in Supply Chain Management, Logistics, Manufacturing, Industrial Engineering, Business Administration or a related field.
- Relevant experience in production planning, material planning or manufacturing operations is preferred.
- Experience in electronics, precision manufacturing, technology or related manufacturing industries will be an advantage. ...
最后机会申请此工作。
Posted
3 days ago
Technician (Fresh) - Batu Kawan/Bayan Lepas
MYR1,900 - MYR2,000 每月
- Minimum education level SKM / SVM / Certificate
- Study and or work in field of CNC / Machining / Industrial / Tooling and Welding
- Able to commit for overtime (up to 50hours per month) ...
Posted
6 days ago
MYR2,500 - MYR3,800 每月
Fresh Graduates
- Bachelor’s degree in Computer Science, Information Technology/ Electrical &Communications / Electrical & Electronics / Electrical Engineering or a related field.
- 1-2 years of experience in IoT/AI development, with a focus on cloud-based application
- Fresh graduates are encouraging to apply ...
Posted
9 days ago
Undisclosed
- Experienced in Wirebond process and able to perform troubleshooting, set-up, conversion and recipe creation.
- Employment Type : Full time
- Fluent in English, and Bahasa Malaysia. ...
最后机会申请此工作。
Posted
a month ago
MYR3,800 - MYR5,000 每月
- Bachelor's Degree in Electronics & Electrical, Chemical /Mechatronic/Mechanical/Chemical Engineering or related field.
- Minimum 1-3 years working experience in electronics manufacturing industry, specialized in mechanical/chemical processes.
- Fresh graduates with strong interest and internship exposure in process engineering may also be considered. ...
Posted
2 months ago
Undisclosed
- Certificate, Diploma, or Technical Qualification in Mechatronics, Mechanical Engineering, Electrical & Electronic Engineering, Automation Technology, Industrial Maintenance, or r equivalent years of related experience.
- Minimum 0 -5 years of experience in equipment maintenance, robotics, automation, or manufacturing environments.
- Experience in industrial robots, automated systems, PLCs (Programmable Logic Controller), and production equipment is preferred. ...
最后机会申请此工作。
Posted
6 days ago
Undisclosed
- Degree in Mechanical & Electrical Engineering / Mechatronic Engineering / Electrical & Electronics Engineering.
- At least 1-2 years of experience in relevant fields.
- Familiar with equipment operation and know basic maintenance of production equipment/machine. ...
Posted
a month ago
MYR900 - MYR1,000 每月
- Open for Sept/Oct Internship Intake with a minimum commitment of 6 months or longer.
- Degree in Electrical & Electronics Engineering or any related engineering fields.
- Possesses own transport and willing to travel for on-site support. ...
最后机会申请此工作。
Posted
6 days ago
Undisclosed
- Bachelor's Degree in Electrical Engineering, Electronics Engineering, Mechanical Engineering, Mechatronics, or a related field.
- Knowledge of manufacturing equipment, automation systems, and industrial machinery.
- Experience in equipment setup, installation, commissioning, maintenance, and troubleshooting. ...
最后机会申请此工作。
Posted
12 days ago
MYR900 - MYR1,000 每月
- Able to commit internship placement for a minimum of 6 months (Oct 2026 Intake).
- Degree in Electrical & Electronics Engineering or any related engineering fields.
- Possesses own transport and willing to travel for site visits, installations, and supervision tasks. ...
最后机会申请此工作。
Posted
6 days ago
Undisclosed
- To support wire bond process engineering works and carry out yield, quality, cost savings, productivity improvements and documentation.
- Degree in related discipline with min 5 years relevant working experience or graduate with the degree in any Electronics, Electrical, Mechanical or Mechatronics engineering course.
- Job Overview: ...
最后机会申请此工作。
Posted
19 days ago
Undisclosed
- Degree: Bachelor's in Engineering, Procurement, Business, or equivalent.
- Experience: Minimum 3-5 years in sourcing/procurement, focused on cost optimization (manufacturing experience preferred).
- Candidates must have technical knowledge background. ...
Posted
2 months ago
Undisclosed
- Candidate must possess Degree in Electronics/Electrical Engineering and Mechanical or equivalent.
- Basic technical knowledge in Electronic/Semiconductors.Familiar with SPC, FMEA, DOE, TPM, OCAP, JMP, RCA, Control Plan, Working Instruction, Predictive Maintenance.
- Education Requirement: ...
最后机会申请此工作。
Posted
a month ago
Undisclosed
- Degree in related discipline or Diploma with 4 years relevant working experience.
- Degree in related discipline or Diploma with 4 years relevant working experience.
- Job Overview : ...
最后机会申请此工作。
Posted
a month ago
Undisclosed
- Diploma in Electrical/Electronics/Mechanical Engineering.
- Basic knowledge in Molding process (Hydraulic and servo system,)
- Able to read schematic diagram. ...
最后机会申请此工作。
Posted
a month ago
Undisclosed
- Education Requirement:
- Additional Desirable Qualifications:
- Education Requirement: ...
最后机会申请此工作。
Posted
a month ago
Undisclosed
- Minimum qualification is a Diploma in Electronics/Microelectronics.
- The candidate should have Failure Analysis experience in Package or Die level FA or Reliability analysis experience for a minimum of 1 year and above in semiconductor manufacturing related company.
- Well versed in using FA & Rel related equipment such as Microscope, Parametric Analyzer, X-ray, CSAM, SEM-EDX, Decapper, TDR, Micro Prober station, FTIR, HAST, Bake oven, Reflow machine, TC chamber, Burn in oven and etc. ...
最后机会申请此工作。
Posted
a month ago
Undisclosed
- Qualification & Experience : 1. AutoCAD drafting 2. Operate Cadence APD 3. Basic Design Manufacturing Process knowledge. 4. MS. Office 5. Operate GC Prevue 6. Degree in related discipline or 7. Diploma with 4 years relevant working experience.
最后机会申请此工作。
Posted
a month ago
MYR4,000 - MYR5,000 每月
- Bachelor's Degree in Supply Chain Management, Business Administration, Logistics, Engineering, or a related field.
- Minimum 3 years of working experience in Supply Chain, Demand Planning, Materials Planning, Procurement, Program Management, or a related function.
- Knowledge of MRP/ERP systems and supply chain processes. ...
Posted
2 months ago
Undisclosed
- Degree in Mechanical/ Electronics / Electrical /Mechanical Engineering.
- Min 2 years in semiconductor industry in the field of assembly engineering.
- Experience in die/glass attach process. ...
最后机会申请此工作。
Posted
a month ago
Undisclosed
- Education Requirement:
- Degree in Electronics / Electrical /Chemical/Mechanical Engineering
- Additional Desirable Qualifications: ...
最后机会申请此工作。
Posted
a month ago
Undisclosed
- Education Requirement: Degree in engineering field with CGPA 3.2 and above
- Additional Desirable Qualifications: Fresh Grad/Min 1 years relevant working experience in semiconductor / Electronics manufacturing environment.
- Education Requirement: Degree in engineering field with CGPA 3.2 and above ...
最后机会申请此工作。
Posted
a month ago