100+ Electronics Engineering Jobs in Pulau Pinang - September 2026 - High Salaries
Showing 106 jobs results for
"electronics engineering"
in Pulau Pinang
MYR2,500 - MYR3,300 Per Month
- Operate and handle electronic measurement equipment such as oscilloscopes, power supplies, and electronic loads
- Perform electronic assembly tasks including hand soldering, solder touch-up, and PCBA rework
- Compile, record, and maintain accurate test data and measurement results in proper documentation format ...
Posted
2 months ago
MYR2,100 - MYR4,000 Per Month
Fresh Graduates
- Works from guidelines and standardized procedures/instructions.
- May design/build tools. Box build level debug and PCA level troubleshooting and rework
- Duties may be related to installation, maintenance, repair and support of manufacturing equipment, technical support of one or more production processes, product test and troubleshooting, and technical analyses and problem-solving. ...
Be an early applicant!
Posted
7 days ago
MYR2,200 - MYR2,500 Per Month
+Additional Compensation
Fresh Graduates
- Perform Test cycle with correct sequent as per PMS Work Instruction.
- Perform Test fixture daily cleaning cycle per Work Instruction
- Perform 5S at Test Work Benches before start of Shift work. ...
Be an early applicant!
Posted
20 days ago
MYR1,700 - MYR2,500 Per Month
- Ensure works are performed according to technical specifications, approved procedures and safety requirements.
- Ensure CCTV systems and related equipment are installed and maintained properly.
- Report work completion status, technical issues, defects and site conditions to the Senior Technical Executive / Team Leader. ...
-Willing and able to travel between project sites within the Northern Zone.
-Willing to work after hours
+4
Be an early applicant!
Posted
18 days ago
Undisclosed
- Perform downtime repair and troubleshooting for AOI machine
- Support engineering and NPI
Posted
a month ago
MYR2,300 - MYR2,500 Per Month
- Maintain strong technical proficiency in all Valtech products
- Continuously seek improvements in internal processes and on-site technical operations
- Lead a team of technicians to meet the company’s technical requirements ...
Posted
a month ago
MYR2,200 - MYR2,500 Per Month
Fresh Graduates
- Build, modify, maintain, and troubleshoot engineering test fixtures and qualification setups.
- Collaborate with engineering teams to investigate issues, identify root causes, and drive timely issue closure
- Perform product testing, qualification, and failure analysis to support new product introductions, engineering evaluations, and customer requirements. ...
Be an early applicant!
Posted
14 days ago
Undisclosed
- Responding to production maintenance calls within the defined response time.
- Performing basic electrical, mechanical, pneumatic, hydraulic, and control-system troubleshooting, according to competency level.
- Updating maintenance checklists, work orders, repair records, and spare-part usage records. ...
Be an early applicant!
Posted
14 days ago
MYR4,500 - MYR6,500 Per Month
- Generate material requirements based on production schedules and ensure sufficient raw materials and components are available.
- Coordinate closely with Production, Purchasing, Warehouse, Quality, Engineering and Sales teams.
- Monitor the availability and delivery status of purchased materials and components. ...
Be an early applicant!
Posted
5 days ago
Undisclosed
- Perform downtime repair and troubleshooting for wirebond machine
- Support engineering and NPI
Be an early applicant!
Posted
a month ago
MYR2,500 - MYR3,800 Per Month
Fresh Graduates
- Collaborate with cross-functional teams to identify and implement Io solutions that drive business value
- Stay up-to-date with the latest IoT/AI technologies, trends, and best practices
- Provide technical support and training to end-users and stakeholders ...
Posted
11 days ago
MYR3,800 - MYR5,000 Per Month
- Establish priority list on gaps/opportunities with effective closure plan.
- Drive effective work method and solution through automation and poka yoke solution.
- Provide OPL (One Point Lesson) and certification test to ensure all floor personnel are adequately trained and qualified. ...
Posted
2 months ago
Undisclosed
- Execute sourcing in accordance with the defined Approved Vendor List (AVL).
- Support all RFQ activities for new and established customers.
- Act as the key contact between suppliers and internal SQE, Business Unit, and Engineering teams to complete new component qualification. ...
Posted
2 months ago
Undisclosed
- Liaise with supplier and customer related to design.
- Project Management.
- Provide technical support to internal and external customer. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Coordinate with Production, Engineering, and Quality teams to minimize downtime and improve equipment efficiency.
- Maintain accurate maintenance records, equipment logs, and spare parts stock.
- Maintain good housekeeping practices and comply with 5S standards. ...
Be an early applicant!
Posted
8 days ago
MYR900 - MYR1,000 Per Month
- Technical Connections: Provide hands-on assistance during corrective troubleshooting, check basic electrical and AC/DC components , and support on-site recovery for offline systems (WiFi/logger setups).
- Client & Logistics Coordination: Assist in scheduling customer maintenance appointments, handle basic inquiries, and coordinate with Supply Chain for replacement parts and logistics.
- Safety & Compliance: Ensure strict compliance with company safety guidelines and practice proper PPE usage during all operations. ...
Be an early applicant!
Posted
7 days ago
Undisclosed
- Assigning and monitoring maintenance tasks for technicians.
- Supporting technicians during complex maintenance and repair activities.
- Conducting root-cause analysis for repeated breakdowns and major equipment failures. ...
Be an early applicant!
Posted
14 days ago
MYR900 - MYR1,000 Per Month
- Quality Assurance: Exhibit meticulous attention to detail to maintain high-quality standards and prevent errors in all operational tasks.
- Problem Solver: Offer ideas to resolve on-site challenges.
- Taking Challenge: Embrace challenges as a valuable learning curve. ...
Be an early applicant!
Posted
7 days ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Review bonding diagrams, strip drawings, process requirements, customers specifications and standard.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Be an early applicant!
Posted
21 days ago
Undisclosed
- Verify machine settings and ensure calibration is correct before starting operations.
- Adjust machine parameters as needed to maintain optimal performance.
- Process Control and Documentation: ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Interfaces with personnel on production, QA and other support groups regarding product/process related problems and disposition.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Support PM on tooling and equipment conversion and buy-off.
- Ability to handle semi-major machine breakdown, trouble-shooting and able to read machine electrical and pneumatic diagram.
- Contribute idea of improvement, participate on productivity and equipment improvement project. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Perform downtime repair and troubleshooting for AOI machine
- Support engineering and NPI
Posted
a month ago
Undisclosed
- Improve FA workstations & foster team safety awareness.
- Execute Product Reliability Stress in Reliability Lab. Manage stress test chamber activities loading plan and chamber capacity.
- To perform package delamination analysis by using SAM (Scanning Acoustic Microscopy) machine. ...
Be an early applicant!
Posted
a month ago
MYR6,000 - MYR7,500 Per Month
- Conduct machine troubleshoot assembly-related issues.
- Work closely with Mechanical, Electrical, and Software Engineering teams to resolve technical problems during machine build.
- Ensure all assembly work complies with quality, safety, and production standards. ...
Good electro-mechanical equipment troubleshooting skills.
Read and orally communicate in Mandarin (writing ability not required).
+3
Be an early applicant!
Posted
a month ago
Undisclosed
- Support engineering build requests, ramp ups and platform extensions.
- Monitor and improving the yield of DA/GA process, including cost reduction activities.
- Support on the TMM and TMS activities ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Work together with Manufacturing team to prioritize the urgent and revenue lots as well as other lots in pipeline.
- Communicate with Manufacturing team to plan on the line activities and conversions
- Maintain and monitor process parameters in order to control process stability. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Adjust machine parameters as needed to maintain optimal performance.
- Adhere to defined process flows, ensuring all steps are executed per manufacturing guidelines.
- Record and track production metrics such as yield, cycle time, and defect rates. ...
Be an early applicant!
Posted
a month ago
MYR4,000 - MYR6,000 Per Month
- Conduct machine troubleshoot assembly-related issues.
- Work closely with Mechanical, Electrical, and Software Engineering teams to resolve technical problems during machine build.
- Ensure all assembly work complies with quality, safety, and production standards. ...
Posted
21 days ago