500+ Manufacturing Engineering Jobs in Pulau Pinang - October 2026 - High Salaries
Showing 514 jobs results for
"manufacturing engineering"
in Pulau Pinang
MYR3,500 - MYR5,000 Per Month
- Precision Tool Grinding: Grind high-precision punch, reamers and custom micro-tools from solid carbide or HSS blanks.
- Wheel Profile Dressing: Select, mount, and dress diamond and CBN wheel packs. Measure and input wheel qualification data into the CNC controller.
- In-Process Quality Control: Perform first-article and in-process inspections using ultra-precision metrology equipment (e.g. profile projectors, laser micrometers) to guarantee tolerances down to the micron level. ...
Posted
a month ago
MYR3,000 - MYR4,000 Per Month
- Maintaining routing in SAP system
- Reviewing and preparing digital harness board drawing
- Reviewing and submitting Technical Queries (TQ) ...
Posted
a month ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead process validation activities (IQ/OQ/PQ, SPC, PFMEA, Control Plans, GR&R).
- Own production performance metrics including yield, throughput, cycle time, quality, and cost.
- Drive root cause analysis, CAPA, and continuous improvement initiatives. ...
Posted
13 days ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead process validation activities (IQ/OQ/PQ, SPC, PFMEA, Control Plans, GR&R).
- Own production performance metrics including yield, throughput, cycle time, quality, and cost.
- Drive root cause analysis, CAPA, and continuous improvement initiatives. ...
Posted
13 days ago
MYR3,500 - MYR5,500 Per Month
- · Implementing preventive maintenance program
- · Implementing predictive maintenance program
- · Root cause analysis for failure (5-Why) ...
Be an early applicant!
Posted
20 days ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead process validation activities (IQ/OQ/PQ, SPC, PFMEA, Control Plans, GR&R).
- Own production performance metrics including yield, throughput, cycle time, quality, and cost.
- Drive root cause analysis, CAPA, and continuous improvement initiatives. ...
Posted
13 days ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Berpengalaman dalam memasang dan mengendalikan mesin Power Press serta mould.
- Mempunyai pengalaman dalam mengawal dan merekod pergerakan keluar masuk mould dan alat ganti (spare parts).
- Mempunyai pengalaman berkaitan penyelenggaraan mesin dan mould adalah satu kelebihan.
Posted
10 days ago
MYR4,000 - MYR5,500 Per Month
+Additional Compensation
- Track raw material usage, finished goods inventory, and manufacturing yields closely, identifying variance drivers and implementing continuous improvement initiatives to reduce waste, control utility consumption, and optimize production costs.
- Enforce a strong safety culture by ensuring operators comply with Environment, Health, and Safety (EHS) guidelines, conduct safety briefings, manage shift rosters, and provide on-the-job training for production operators.
- The Production Executive is responsible for overseeing the daily manufacturing operations of the poultry feedmill to ensure safe, efficient, and high-quality feed production. The role directs manufacturing processes, optimizes resource utilization, maintains strict compliance with feed safety, biosecurity, and environmental regulations, and coordinates closely with maintenance, quality control, and supply chain teams to meet production targets cost-effectively. ...
Be an early applicant!
Posted
20 days ago
MYR2,500 - MYR3,000 Per Month
Fresh Graduates
- Keep the work station clean and follow basic safety rules on the factory floor.
- Cut, bend, shape, and assemble PFA plastic tubing according to customer orders and technical drawings.
- Operate simple production tools, machines, and heating equipment safely. ...
Be an early applicant!
Posted
13 days ago
MYR3,000 - MYR4,000 Per Month
Fresh Graduates
- Process Monitoring & Adjustment: Monitor production progress and key performance metrics to identify bottlenecks, delays, or inefficiencies. Analyze data and implement timely schedule adjustments or corrective actions as needed.
- Reporting & Compliance: Maintain accurate production and inventory reports, providing regular updates to management on schedule status, capacity utilization, and production efficiency. Ensure planning activities align with quality standards, company policies, and regulatory requirements.
- Continuous Improvement: Support and participate in process improvement initiatives aimed at optimizing production efficiency and reducing costs. Contribute to the development of contingency plans and strategies for handling equipment failures or production disruptions. ...
Be an early applicant!
Posted
a month ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform electrical validationincludingunpowered IV curve and Time-Domain Reflectometry (TDR) to identify failing areas.
- Utilize CSAM, X-ray imaging, and material analysis tools for defect detection.
- Carry out visual inspection using microscopes to identify defects on product substrates. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Maintaining routing in SAP system
- Reviewing and preparing digital harness board drawing
- Reviewing and submitting Technical Queries (TQ) ...
Posted
3 months ago
MYR5,000 - MYR6,000 Per Month
- Process Quality Supervision: Monitor production operators to ensure standardized operations and compliance with quality requirements.
- Inspection Management & Data Reporting: Maintain daily, weekly, and monthly quality inspection data, including pass rate, defect rate, and abnormality rate, and prepare quality reports.
- Quality Improvement: Participate in quality improvement activities and work with Process Engineering and QA teams to reduce defects and recurring quality issues. ...
Be an early applicant!
Posted
4 days ago
Undisclosed
Be an early applicant!
Posted
a month ago
Company Confidential
MYR5,000 - MYR6,000 Per Month
- Quality issue analysis: Coordinate the team, use tools such as 5Why, fishbone diagram, and 8D report to conduct root cause analysis on customer complaints or internal non-conforming products, formulate corrective and preventive measures, track and verify the closed-loop effect, and write reports.
- Quality Data Management: Query, analyze or output production quality data (such as pass rate, failure rate, MSA) through tools like MES and Minitab, monitor production conditions, and confirm improvement directions.
- Quality Training and Awareness Enhancement: Develop quality awareness training materials, carry out QCC (Quality Control Circle) activities, and enhance the quality responsibility of all staff. ...
Be an early applicant!
Posted
4 days ago
Lead Process Design Engineer
MYR8,000 - MYR15,000 Per Month
- Assist the purchasing department in equipment procurement, review suppliers' technical data, and participate in technical clarification;
- Leading and coordinating discipline interface;
- System shop drawing review & approve, technical submittal review & approval； ...
Be an early applicant!
Posted
3 days ago
MYR2,300 - MYR3,500 Per Month
- Handle customer complaints and internal quality issues, including conducting root cause analysis and implementing corrective actions.
- Participate in New Product Introduction (NPI)meetings and develop and establish appropriateQuality Plans (QP).
- Provide technical support for Product Certification (PC), PPS, and the preparation and formatting of Load and Compression Test requirements and results. ...
Be an early applicant!
Posted
11 days ago
Senior Process Design Engineer
MYR8,000 - MYR15,000 Per Month
- Assist the purchasing department in equipment procurement, review suppliers' technical data, and participate in technical clarification;
- Leading and coordinating discipline interface;
- System shop drawing review & approve, technical submittal review & approval； ...
Be an early applicant!
Posted
3 days ago
MYR4,000 - MYR5,000 Per Month
- To consider correct tools as required to cut the particular materials and to program the machines accordingly.
- To troubleshoot and resolve problems as and when program errors happen.
- To optimize programs and reduce wastage of material. ...
Be an early applicant!
Posted
24 days ago
Production Planner Cum Supervisor
MYR2,500 - MYR4,000 Per Month
- Follow up on production delays, machine breakdowns, material shortages, and quality issues
- Supervise production activities and ensure production targets, quality, and delivery schedules are achieved
- Coordinate closely with Sales, Purchasing, Warehouse, QC, and Production teams ...
Posted
10 days ago
Undisclosed
Be an early applicant!
Posted
20 days ago
MYR4,000 - MYR5,000 Per Month
- Align with business order demands, synchronize production schedules and delivery cycles, timely update delivery changes and order abnormalities to ensure stable customer delivery.
- Sort and statistics production, delivery and material data, prepare daily, weekly and monthly reports to provide data support for production optimization and capacity improvement.
- Cooperate with production, quality and process departments to handle production abnormalities, rework and shutdown issues, optimize scheduling logic, and reduce delivery delays and capacity waste. ...
Be an early applicant!
Posted
4 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. Assist in the development and implementation of supplier management programs. ...
Be an early applicant!
Posted
20 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. ...
Be an early applicant!
Posted
a month ago
MYR4,500 - MYR6,500 Per Month
- Generate material requirements based on production schedules and ensure sufficient raw materials and components are available.
- Coordinate closely with Production, Purchasing, Warehouse, Quality, Engineering and Sales teams.
- Monitor the availability and delivery status of purchased materials and components. ...
Posted
17 days ago
MYR3,200 - MYR3,800 Per Month
- Handle general production issues and worker-related matters on the production floor.
- Assist with mould installation, mould removal and mould changeover.
- Assist with new product and new mould trials. ...
Posted
a month ago
Undisclosed
- Daily job arrangement, resources allocation, utilization and capacity planning.
- Coverage area include in-process and out-going inspection (Follow site).
- Work with QA engineer to define the inspection flows and inspection instruction. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Design statistical reports and dashboards according to user needs to help users improve management efficiency
- Ensure data integration and synchronization between MES and peripheral systems (WMS, ERP), and handle interface data
- Regularly summarize and refine, form a knowledge base, and share with other plant personnel to improve overall operation and maintenance capabilities ...
Posted
a month ago
Marketing & Engineering
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Estimate machining processes, material requirements, tooling and other production costs.
- Prepare and submit quotation and costing to customers.
- Liaise with customers to clarify drawings, technical requirements and quotation details. ...
Posted
a day ago
Undisclosed
- Ensure that parts issued are free of visible defects.
- Other duties and assignments as instructed by superiors from time to time.
- To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided bythe company.
Be an early applicant!
Posted
20 days ago