200+ Design Engineering Jobs in Pulau Pinang - July 2026 - High Salaries
显示251个工作的结果
"design engineering"
在 Pulau Pinang
支持聊天
Junior Mechanical Design Engineer (Jig & Fixture / Fabrication)
MYR2,000 - MYR3,000 每月
- Assist with site measurements and engineering surveys.
- Coordinate with fabrication vendors regarding drawings and technical requirements.
- Support prototype assembly, testing and design improvements. ...
最后机会申请此工作。
Posted
2 days ago
支持聊天
Senior Electric Engineer (55979)
MYR9,000 - MYR11,000 每月
- Ensure Safety: Making sure that the workplace is safe for everyone and that the machines are used correctly.(Japan Side handing Design)
- Communicate with clients in Netherlands
- Plan and Organize: Figuring out the best way to make the products. including planning how much of each part is needed and how to assemble everything efficiently. ...
最后机会申请此工作。
Posted
17 hours ago
支持聊天
Up to MYR7,000 每月
- Select and integrate sensors and actuators based on functional and accuracy requirements
- Support motion control, thermal and vacuum system integration tasks
- Prepare complete, review-ready technical documentation in English, including drawings and change documentation ...
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- Select suitable materials considering vacuum compatibility, contamination control and corrosion risks
- Conduct Failure Mode and Effects Analysis and support risk mitigation
- Interpret structural simulation results and ensure compliance with regional safety requirements ...
最后机会申请此工作。
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- · Design and detail sheet metal parts and welded frame assemblies for standard applications
- · Create and maintain clear drawings, specifications and change documentation in English
- · Perform tolerance stack-ups and apply geometric dimensioning for assemblies and GD&T ...
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- Apply tolerance stack-up and geometric dimensioning principles for assemblies and GD&T
- Conduct structured problem solving and facilitate risk assessments for own scope
- Support manufacturing and cost reduction initiatives ...
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- · Perform basic thermal calculations and validate performance against system requirements
- · Apply tolerance stack-up and geometric dimensioning principles for assemblies and GD&T
- · Conduct structured problem solving and support risk assessments within own scope ...
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- · Perform tolerance stack-up analysis and apply geometric dimensioning and tolerancing principles
- · Select and handle appropriate materials including metals, graphite, ceramics, quartz and coatings
- · Apply structured problem-solving methods such as root cause analysis and eight discipline methodology ...
最后机会申请此工作。
Posted
13 days ago
支持聊天
MYR6,000 - MYR8,000 每月
George Town, Pulau Pinang
- Advise the Project Manager and Construction Manager on issues causing delays and assist in preparing the necessary contractual correspondence to Clients and Subcontractors.
- Prepare mini work programs or schedules as required, based on the Two Weeks Look Ahead Plan provided by the Construction Manager.
- Monitor the Material Wastage Report and take preventive or corrective actions where necessary. ...
最后机会申请此工作。
Posted
14 hours ago
MYR3,000 - MYR3,600 每月
George Town, Pulau Pinang
- · Prepare space planning, mood boards, material selections, and proposals.
- · Oversee project progress and coordinate with project managers, contractors, and suppliers.
- · Review drawings and ensure design quality and consistency. ...
最后机会申请此工作。
Posted
2 days ago
支持聊天
MYR2,000 - MYR3,000 每月
- Assist with site measurements and engineering surveys.
- Coordinate with fabrication vendors regarding drawings and technical requirements.
- Support prototype assembly, testing and design improvements. ...
最后机会申请此工作。
Posted
3 days ago
支持聊天
Up to MYR7,000 每月
- Perform risk assessments and Failure Mode and Effects Analysis, driving mitigation actions to closure
- Optimize designs for manufacturability and cost awareness
- Create and maintain high-quality technical documentation, drawings and change records ...
Posted
13 days ago
MYR8,000 - MYR10,000 每月
- Work with cross-functional engineering teams to evaluate technical feasibility, risks, and design trade-offs.
- Support concept design, proposal development, technical reviews, and design validation.
- Analyze customer requirements and clarify technical gaps, risks, and assumptions. ...
Posted
11 days ago
MYR8,000 - MYR10,000 每月
- Evaluate the implementation path and business value of new technologies in automation equipment.
- Lead decision-making for key technical challenges and provide high-level technical guidance and support to the team.
- Lead the full-cycle development of customized automation equipment for optical module applications, including testingequipment, assembly equipment, inspection equipment, and other non-standard automation systems. ...
最后机会申请此工作。
Posted
11 days ago
MYR5,000 - MYR8,000 每月
- Allocate and manage project resources, including team members, equipment, and budget.
- Monitor project progress, identify potential risks, and develop mitigation strategies to ensure project success.
- Facilitate effective communication and collaboration among project team members and stakeholders. ...
Posted
2 days ago
支持聊天
Manager /Senior Mechanical Designer
MYR5,000 - MYR12,000 每月
Simpang Ampat, Pulau Pinang (+1)
靠近火车站
- Handle daily design tasks and be sensitive to the time allocation of projects.
- Ensure designs and projects are completed on time and cost-effectively.
- Support setup, test run and equipment buyoff. ...
Posted
4 days ago
支持聊天
Up to MYR7,000 每月
- Perform risk assessments and Failure Mode and Effects Analysis, driving mitigation actions to closure
- Optimize designs for manufacturability and cost awareness
- Create and maintain high-quality technical documentation, drawings and change records ...
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- Select and integrate sensors and actuators based on functional and accuracy requirements
- Support motion control, thermal and vacuum system integration tasks
- Prepare complete, review-ready technical documentation in English, including drawings and change documentation ...
最后机会申请此工作。
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- · Design and detail sheet metal parts and welded frame assemblies for standard applications
- · Create and maintain clear drawings, specifications and change documentation in English
- · Perform tolerance stack-ups and apply geometric dimensioning for assemblies and GD&T ...
最后机会申请此工作。
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- Apply tolerance stack-up and geometric dimensioning principles for assemblies and GD&T
- Conduct structured problem solving and facilitate risk assessments for own scope
- Support manufacturing and cost reduction initiatives ...
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- · Perform tolerance stack-up analysis and apply geometric dimensioning and tolerancing principles
- · Select and handle appropriate materials including metals, graphite, ceramics, quartz and coatings
- · Apply structured problem-solving methods such as root cause analysis and eight discipline methodology ...
最后机会申请此工作。
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- · Perform tolerance stack-up analysis and apply geometric dimensioning and tolerancing principles
- · Select and handle appropriate materials including metals, graphite, ceramics, quartz and coatings
- · Apply structured problem-solving methods such as root cause analysis and eight discipline methodology ...
最后机会申请此工作。
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- Apply tolerance stack-up and geometric dimensioning principles for assemblies and GD&T
- Conduct structured problem solving and facilitate risk assessments for own scope
- Support manufacturing and cost reduction initiatives ...
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- · Perform basic thermal calculations and validate performance against system requirements
- · Apply tolerance stack-up and geometric dimensioning principles for assemblies and GD&T
- · Conduct structured problem solving and support risk assessments within own scope ...
最后机会申请此工作。
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- Apply tolerance stack-up and geometric dimensioning principles for assemblies and GD&T
- Conduct structured problem solving and facilitate risk assessments for own scope
- Support manufacturing and cost reduction initiatives ...
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- · Perform tolerance stack-up analysis and apply geometric dimensioning and tolerancing principles
- · Select and handle appropriate materials including metals, graphite, ceramics, quartz and coatings
- · Apply structured problem-solving methods such as root cause analysis and eight discipline methodology ...
最后机会申请此工作。
Posted
13 days ago
支持聊天
MYR2,000 - MYR3,000 每月
- Assist with site measurements and engineering surveys.
- Coordinate with fabrication vendors regarding drawings and technical requirements.
- Support prototype assembly, testing and design improvements. ...
最后机会申请此工作。
Posted
3 days ago
MYR1,800 - MYR3,000 每月
Fresh Graduates
George Town, Pulau Pinang
- Revise and update drawings based on design changes, client feedback, and site conditions.
- Conduct site measurements and prepare as-built drawings when required.
- Coordinate drawings with interior designers, project managers, consultants, and contractors. ...
Posted
7 days ago
支持聊天
Up to MYR7,000 每月
- Apply tolerance stack-up and geometric dimensioning principles for assemblies and GD&T
- Conduct structured problem solving and facilitate risk assessments for own scope
- Support manufacturing and cost reduction initiatives ...
Posted
13 days ago
支持聊天
Up to MYR7,000 每月
- Perform risk assessments and Failure Mode and Effects Analysis, driving mitigation actions to closure
- Optimize designs for manufacturability and cost awareness
- Create and maintain high-quality technical documentation, drawings and change records ...
Posted
13 days ago