42 工程师 Jobs in Pulau Pinang - October 2026 - High Salaries
Showing 42 jobs results for
"工程师"
in Pulau Pinang
Site Safety Engineer (SHO/SSS)
MYR6,000 - MYR9,000 Per Month
George Town, Pulau Pinang
- Investigating and reporting on any incidents or accidents, and implementing corrective actions to prevent recurrence.
- Ensuring the site complies with all relevant health and safety regulations and industry standards.
- Collaborating with project managers, supervisors and other stakeholders to promote a culture of safety. ...
Posted
3 days ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform Assembly fixture daily cleaning cycle per Work Instruction
- Perform 5S at Assembly Work Benches before start of Shift work.
- Organized Assembly tools and equipment per standard for before and after used. ...
Be an early applicant!
Posted
5 days ago
MYR2,200 - MYR2,500 Per Month
Fresh Graduates
- • Generating detailed failure analysis reports as required.
- • Assisting in failure analysis, troubleshooting, and repair of non-conforming products to determine root causes.
- • Reading schematics, assembly drawings, and data sheets to perform tests, build fixtures, and troubleshoot equipment. ...
Be an early applicant!
Posted
5 days ago
MYR2,300 - MYR3,000 Per Month
+Additional Compensation
- Pack acrylic material into flasks under supervision.
- Remove processed dentures from flasks and assist with basic trimming and cleaning.
- Check work carefully to ensure denture cases are prepared correctly and meet the required standards. ...
Be an early applicant!
Posted
4 days ago
MYR2,500 - MYR3,500 Per Month
- Perform equipment qualification, validation and prepare detailed technical reports
- Diagnose and resolve mechanical, electrical, and electronic equipment issues
- Respond promptly to downtime events to minimize production interruptions ...
Be an early applicant!
Posted
2 days ago
MYR2,300 - MYR3,500 Per Month
- Handle customer complaints and internal quality issues, including conducting root cause analysis and implementing corrective actions.
- Participate in New Product Introduction (NPI)meetings and develop and establish appropriateQuality Plans (QP).
- Provide technical support for Product Certification (PC), PPS, and the preparation and formatting of Load and Compression Test requirements and results. ...
Be an early applicant!
Posted
24 days ago
Undisclosed
Be an early applicant!
Posted
a month ago
MYR3,000 - MYR4,500 Per Month
- Monitor machine operations to ensure smooth production and prevent defects.
- Ensure cutting accuracy and product quality meet customer specifications.
- Inspect finished parts using measuring tools (vernier caliper, ruler, etc.). ...
Be an early applicant!
Posted
a month ago
MYR2,500 - MYR3,000 Per Month
Fresh Graduates
- Keep the work station clean and follow basic safety rules on the factory floor.
- Cut, bend, shape, and assemble PFA plastic tubing according to customer orders and technical drawings.
- Operate simple production tools, machines, and heating equipment safely. ...
Posted
a month ago
MYR2,800 - MYR4,000 Per Month
+Additional Compensation
- Maintains a positive, professional attitude when working with dentists and teammates.
- Is open to learning and improving, whether refining classic techniques or exploring digital workflows.
- Fabricate complete and partial dentures with strong attention to fit, aesthetics, and durability. ...
Be an early applicant!
Posted
19 days ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform electrical validationincludingunpowered IV curve and Time-Domain Reflectometry (TDR) to identify failing areas.
- Utilize CSAM, X-ray imaging, and material analysis tools for defect detection.
- Carry out visual inspection using microscopes to identify defects on product substrates. ...
Be an early applicant!
Posted
2 months ago
Company Confidential
MYR5,000 - MYR6,000 Per Month
- Quality issue analysis: Coordinate the team, use tools such as 5Why, fishbone diagram, and 8D report to conduct root cause analysis on customer complaints or internal non-conforming products, formulate corrective and preventive measures, track and verify the closed-loop effect, and write reports.
- Quality Data Management: Query, analyze or output production quality data (such as pass rate, failure rate, MSA) through tools like MES and Minitab, monitor production conditions, and confirm improvement directions.
- Quality Training and Awareness Enhancement: Develop quality awareness training materials, carry out QCC (Quality Control Circle) activities, and enhance the quality responsibility of all staff. ...
Posted
7 days ago
MYR3,500 - MYR5,000 Per Month
- Precision Tool Grinding: Grind high-precision punch, reamers and custom micro-tools from solid carbide or HSS blanks.
- Wheel Profile Dressing: Select, mount, and dress diamond and CBN wheel packs. Measure and input wheel qualification data into the CNC controller.
- In-Process Quality Control: Perform first-article and in-process inspections using ultra-precision metrology equipment (e.g. profile projectors, laser micrometers) to guarantee tolerances down to the micron level. ...
Posted
a month ago
MYR3,500 - MYR5,000 Per Month
- Load and unload materials and finished products from CNC machines, ensuring safe handling practices.
- Assist in the setup and calibration of CNC machines, including tooling and fixture installation.
- Read and interpret technical drawings, blueprints, and work instructions to guide production processes. ...
Posted
a month ago
Undisclosed
- Follow oral/written instructions provided by the team leader, supervisor and/or engineering to complete assembly tasks.
- Ensure that parts issued are free from visible defects.
- Check work after completion of each operation in job and/or completed job to ensure assembly is complete per drawing, that there are no defects and that the work area is clean. ...
Be an early applicant!
Posted
a month ago
Undisclosed
Be an early applicant!
Posted
a month ago
Undisclosed
- Monitor and support on external & internal calibration activities arrangement, calibration certificate verification & calibration sticker(s) updating.
- Verification on the issue feedback by inspector or technician. Communication with production for improvement.
- Communicate with the internal customer to investigate & solve issues. ...
Be an early applicant!
Posted
a month ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Berpengalaman dalam memasang dan mengendalikan mesin Power Press serta mould.
- Mempunyai pengalaman dalam mengawal dan merekod pergerakan keluar masuk mould dan alat ganti (spare parts).
- Mempunyai pengalaman berkaitan penyelenggaraan mesin dan mould adalah satu kelebihan.
Posted
23 days ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Berpengalaman dalam memasang dan mengendalikan mesin Power Press serta mould.
- Mempunyai pengalaman dalam mengawal dan merekod pergerakan keluar masuk mould dan alat ganti (spare parts).
- Mempunyai pengalaman berkaitan penyelenggaraan mesin dan mould adalah satu kelebihan.
Posted
23 days ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Berpengalaman dalam memasang dan mengendalikan mesin Power Press serta mould.
- Mempunyai pengalaman dalam mengawal dan merekod pergerakan keluar masuk mould dan alat ganti (spare parts).
- Mempunyai pengalaman berkaitan penyelenggaraan mesin dan mould adalah satu kelebihan.
Posted
23 days ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Berpengalaman dalam memasang dan mengendalikan mesin Power Press serta mould.
- Mempunyai pengalaman dalam mengawal dan merekod pergerakan keluar masuk mould dan alat ganti (spare parts).
- Mempunyai pengalaman berkaitan penyelenggaraan mesin dan mould adalah satu kelebihan.
Posted
23 days ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Berpengalaman dalam memasang dan mengendalikan mesin Power Press serta mould.
- Mempunyai pengalaman dalam mengawal dan merekod pergerakan keluar masuk mould dan alat ganti (spare parts).
- Mempunyai pengalaman berkaitan penyelenggaraan mesin dan mould adalah satu kelebihan.
Posted
23 days ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Berpengalaman dalam memasang dan mengendalikan mesin Power Press serta mould.
- Mempunyai pengalaman dalam mengawal dan merekod pergerakan keluar masuk mould dan alat ganti (spare parts).
- Mempunyai pengalaman berkaitan penyelenggaraan mesin dan mould adalah satu kelebihan.
Posted
23 days ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Berpengalaman dalam memasang dan mengendalikan mesin Power Press serta mould.
- Mempunyai pengalaman dalam mengawal dan merekod pergerakan keluar masuk mould dan alat ganti (spare parts).
- Mempunyai pengalaman berkaitan penyelenggaraan mesin dan mould adalah satu kelebihan.
Posted
23 days ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Berpengalaman dalam memasang dan mengendalikan mesin Power Press serta mould.
- Mempunyai pengalaman dalam mengawal dan merekod pergerakan keluar masuk mould dan alat ganti (spare parts).
- Mempunyai pengalaman berkaitan penyelenggaraan mesin dan mould adalah satu kelebihan.
Posted
23 days ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Berpengalaman dalam memasang dan mengendalikan mesin Power Press serta mould.
- Mempunyai pengalaman dalam mengawal dan merekod pergerakan keluar masuk mould dan alat ganti (spare parts).
- Mempunyai pengalaman berkaitan penyelenggaraan mesin dan mould adalah satu kelebihan.
Posted
23 days ago
MYR1,700 - MYR1,800 Per Month
Fresh Graduates
- Berpengalaman dalam memasang dan mengendalikan mesin Power Press serta mould.
- Mempunyai pengalaman dalam mengawal dan merekod pergerakan keluar masuk mould dan alat ganti (spare parts).
- Mempunyai pengalaman berkaitan penyelenggaraan mesin dan mould adalah satu kelebihan.
Posted
23 days ago
MYR3,800 - MYR5,000 Per Month
- Establish priority list on gaps/opportunities with effective closure plan.
- Drive effective work method and solution through automation and poka yoke solution.
- Provide OPL (One Point Lesson) and certification test to ensure all floor personnel are adequately trained and qualified. ...
Posted
3 months ago
Undisclosed
- Adjust machine parameters as needed to maintain optimal performance.
- Adhere to defined process flows, ensuring all steps are executed per manufacturing guidelines.
- Record and track production metrics such as yield, cycle time, and defect rates. ...
Be an early applicant!
Posted
2 months ago
MYR2,500 - MYR3,400 Per Month
Fresh Graduates
- To install Car Recorder (Dashcam), Tyre Pressure Monitoring System (TPMS), Hardwire Fuse Kit
- Communicate with customer sincerely and in a helpful manner
Posted
3 months ago