100+ Technical Drawing Jobs in Malaysia | Job Vacancies | July 2026 | Ricebowl

Showing 151 jobs results for "technical drawing"
Never miss any updates for Technical Drawing jobs
MYR1,800 - MYR2,500 Per Month
Fresh Graduates

Sungai Seluang, Kedah

  • Machine Calibration & Monitoring: Conduct machine and equipment check before operation and perform calibration when required to ensure accurate production results.
  • Production Support: Work closely with supervisors and team members to achieve production targets, improve efficiency, and support continuous improvement activities.
  • Housekeeping & Safety: Maintain a clean, organized, and safe work area while following company procedures and safety guidelines. ...
Problem Solving Technical Drawing
+6

Be an early applicant!

Posted
14 days ago
MYR3,500 - MYR5,000 Per Month
Fresh Graduates

Petaling, WP Kuala Lumpur

Near Train Station
  • Prepare carpentry, built-in furniture and interior detailing drawings
  • Create 3D models, perspectives and rendered visuals
  • Make amendments based on senior designer and client feedback ...
Design Technical Drawing
+2
Posted
15 days ago
MYR3,500 - MYR5,000 Per Month
Fresh Graduates

Petaling, WP Kuala Lumpur

Near Train Station
  • Prepare carpentry, built-in furniture and interior detailing drawings
  • Create 3D models, perspectives and rendered visuals
  • Make amendments based on senior designer and client feedback ...
Design Technical Drawing
+2
Posted
15 days ago
Chat Available
MYR2,000 - MYR4,500 Per Month
  • Prepare site reports, progress updates, and documentation.
  • Ensure compliance with safety and quality requirements.
  • Supervise and monitor site works for steel structure installation. ...
Posted
10 days ago
MYR3,500 - MYR5,000 Per Month
Fresh Graduates

Petaling, WP Kuala Lumpur

Near Train Station
  • Prepare carpentry, built-in furniture and interior detailing drawings
  • Create 3D models, perspectives and rendered visuals
  • Make amendments based on senior designer and client feedback ...
Design Technical Drawing
+2
Posted
15 days ago
Chat Available
Undisclosed
Fresh Graduates
  • Understand design drawings and raise material requisition or utilize balance stock for raw material such as steel products.
  • Ensure on time project completion by monitoring project progress, coordinating activities, resolving problems and monitor the project budget throughout the project timeline.
  • Arrange and involve in testing and inspection of final products if third party is involved. ...
Posted
15 days ago
Chat Available
MYR3,200 - MYR7,000 Per Month

Puncak Alam, Selangor

  • • Conduct root cause analysis and develop corrective actions.
  • • Minimise unnecessary escalations to management through independent problem-solving.
  • • Establish troubleshooting methodologies and technical best practices. ...
Problem Solving Project Management
+1
Posted
7 days ago
Chat Available
MYR3,000 - MYR5,000 Per Month
Fresh Graduates
Near Train Station
  • Coordinate with engineers, project teams, and clients to ensure design accuracy.
  • Review and update drawings according to project changes.
  • Ensure drawings comply with industry standards and company requirements. ...
AutoCAD SolidWorks
+3
Posted
12 days ago
Chat Available
MYR3,000 - MYR5,000 Per Month
+Additional Compensation

Bandar Kuala Lumpur, WP Kuala Lumpur

Near Train Station
  • Collect customer feedback and assist in improving service processes.
  • Work with the team to meet performance goals; able to accept day/night shift rotations.
  • We are seeking an Engineer Assistant with a passion for engineering to ensure exceptional customer service. This position requires the candidate be able to work night shifts. ...
Posted
12 days ago
Chat Available
MYR2,200 - MYR2,800 Per Month
  • Collaborating with cross-functional teams to ensure the successful execution of engineering projects
  • Providing technical support and maintenance to existing mechanical systems
  • Staying up-to-date with industry trends and advancements in mechanical engineering ...
Posted
11 days ago
Chat Available
MYR3,000 - MYR5,000 Per Month
Fresh Graduates
Near Train Station
  • Coordinate with engineers, project teams, and clients to ensure design accuracy.
  • Review and update drawings according to project changes.
  • Ensure drawings comply with industry standards and company requirements. ...
AutoCAD SolidWorks
+3
Posted
12 days ago
Chat Available
MYR3,000 - MYR5,000 Per Month
Fresh Graduates
Near Train Station
  • Coordinate with engineers, project teams, and clients to ensure design accuracy.
  • Review and update drawings according to project changes.
  • Ensure drawings comply with industry standards and company requirements. ...
AutoCAD SolidWorks
+3
Posted
12 days ago
Chat Available
MYR2,500 - MYR3,500 Per Month
Fresh Graduates
  • Prepare detailed material specifications and bill of quantities.
  • Ensure compliance with design standards, safety regulations, and industry best practices.
  • Participate in site inspections and ensure designs are correctly implemented during construction. ...
Technical Drawing Reading Blueprints
+1
Posted
5 days ago
Chat Available
MYR2,500 - MYR3,500 Per Month
Fresh Graduates
  • Prepare detailed material specifications and bill of quantities.
  • Ensure compliance with design standards, safety regulations, and industry best practices.
  • Participate in site inspections and ensure designs are correctly implemented during construction. ...
Technical Drawing Reading Blueprints
+1
Posted
5 days ago
Chat Available
MYR2,500 - MYR3,500 Per Month
Fresh Graduates
  • Prepare detailed material specifications and bill of quantities.
  • Ensure compliance with design standards, safety regulations, and industry best practices.
  • Participate in site inspections and ensure designs are correctly implemented during construction. ...
Technical Drawing Reading Blueprints
+1
Posted
5 days ago
Chat Available
MYR2,500 - MYR3,500 Per Month
Fresh Graduates
  • Prepare detailed material specifications and bill of quantities.
  • Ensure compliance with design standards, safety regulations, and industry best practices.
  • Participate in site inspections and ensure designs are correctly implemented during construction. ...
Technical Drawing Reading Blueprints
+1
Posted
5 days ago
Chat Available
Up to MYR7,000 Per Month
  • Select suitable materials considering vacuum compatibility, contamination control and corrosion risks
  • Conduct Failure Mode and Effects Analysis and support risk mitigation
  • Interpret structural simulation results and ensure compliance with regional safety requirements ...
3D Computer-Aided Design Creo
+13

Be an early applicant!

Posted
20 days ago
Chat Available
Up to MYR7,000 Per Month
  • Perform risk assessments and Failure Mode and Effects Analysis, driving mitigation actions to closure
  • Optimize designs for manufacturability and cost awareness
  • Create and maintain high-quality technical documentation, drawings and change records ...
Mechanical Engineering Mechanical design
+17
Posted
20 days ago
Chat Available
Up to MYR7,000 Per Month
  • · Perform tolerance stack-up analysis and apply geometric dimensioning and tolerancing principles
  • · Select and handle appropriate materials including metals, graphite, ceramics, quartz and coatings
  • · Apply structured problem-solving methods such as root cause analysis and eight discipline methodology ...
Posted
20 days ago
Chat Available
Up to MYR7,000 Per Month
  • · Ensure compliance with relevant engineering and safety standards
  • · Support system integration by understanding interfaces and dependencies
  • · Integrate vacuum, motion, sensor and power distribution elements into system concepts ...
Posted
20 days ago
Chat Available
Up to MYR7,000 Per Month
  • Apply tolerance stack-up and geometric dimensioning principles for assemblies and GD&T
  • Conduct structured problem solving and facilitate risk assessments for own scope
  • Support manufacturing and cost reduction initiatives ...
Vacuum system layout Basic engineering calculations
+14
Posted
20 days ago
Chat Available
Up to MYR7,000 Per Month
  • · Perform basic thermal calculations and validate performance against system requirements
  • · Apply tolerance stack-up and geometric dimensioning principles for assemblies and GD&T
  • · Conduct structured problem solving and support risk assessments within own scope ...

Be an early applicant!

Posted
20 days ago
High Opportunity
Chat Available
Up to MYR7,000 Per Month
  • Apply tolerance stack-up and geometric dimensioning principles for assemblies and GD&T
  • Conduct structured problem solving and facilitate risk assessments for own scope
  • Support manufacturing and cost reduction initiatives ...
Vacuum system layout Basic engineering calculations
+14
Posted
20 days ago
Chat Available
MYR4,000 - MYR6,000 Per Month
Near Train Station
  • Maintenance and upkeep of on-site equipment, handling system failures and equipment malfunctions during system operation, and responsible for routine cleaning tasks.
  • Work with the operations and maintenance engineers to conduct systematic inspections and assessments of the water system, and be responsible for recording data from the system inspection checklists and documenting any issues or faults that arise.
  • Responsible for cleaning, calibrating, and maintaining the probes used in the water treatment system on-site. ...
Project Coordination Semiconductor Manufacturing Knowledge
+1
Posted
24 days ago
Chat Available
Up to MYR7,000 Per Month
  • · Perform tolerance stack-up analysis and apply geometric dimensioning and tolerancing principles
  • · Select and handle appropriate materials including metals, graphite, ceramics, quartz and coatings
  • · Apply structured problem-solving methods such as root cause analysis and eight discipline methodology ...
Posted
20 days ago
Chat Available
MYR2,500 - MYR3,500 Per Month
Fresh Graduates
  • Prepare detailed material specifications and bill of quantities.
  • Ensure compliance with design standards, safety regulations, and industry best practices.
  • Participate in site inspections and ensure designs are correctly implemented during construction. ...
Technical Drawing Reading Blueprints
+1
Posted
5 days ago
Chat Available
Up to MYR7,000 Per Month
  • · Perform basic thermal calculations and validate performance against system requirements
  • · Apply tolerance stack-up and geometric dimensioning principles for assemblies and GD&T
  • · Conduct structured problem solving and support risk assessments within own scope ...

Be an early applicant!

Posted
20 days ago
High Opportunity
Chat Available
Up to MYR7,000 Per Month
  • · Perform basic thermal calculations and validate performance against system requirements
  • · Apply tolerance stack-up and geometric dimensioning principles for assemblies and GD&T
  • · Conduct structured problem solving and support risk assessments within own scope ...

Be an early applicant!

Posted
20 days ago
Chat Available
MYR3,000 - MYR10,000 Per Month
Fresh Graduates

Sungai Karang, Pahang

  • -Coordinating with contractors, consultants, and internal departments.
  • -Inspecting and maintaining plant infrastructure.
Civil Engineering Software Site Supervision
+1
Posted
19 days ago
Chat Available
MYR3,500 - MYR4,500 Per Month
Near Train Station
  • Familiarity with standard water treatment processes and principles in the semiconductor industry, knowledge of commonly used equipment and instruments for water systems, and experience in operating water systems in this industry is preferred.
  • Ability to promptly identify the causes of issues that arise during the operation of the water system and provide solutions; for problems that cannot be resolved, ability to resolve them through established processes.
  • Good physical health and strong physical stamina; capable of performing manual tasks effectively and independently in the operation and maintenance of water treatment systems.
Posted
a month ago