100+ Technical Documentation Jobs in Malaysia | Job Vacancies | September 2026 | Ricebowl
Showing 190 jobs results for
"technical documentation"
Electrical Technician / Chargeman
MYR2,000 - MYR2,300 Per Month
- Identify electrical faults and carry out the necessary repairs.
- Ensure all electrical installations comply with safety regulations and standards.
- Maintain proper records of maintenance, inspections, and system performance. ...
Be an early applicant!
Posted
11 days ago
MYR2,100 - MYR2,300 Per Month
Fresh Graduates
- Perform hands-on troubleshooting of tester, handler, and peripheral equipment issues
- Diagnose and recover equipment from electrical, mechanical, software, and hardware failure
- Repair, replace, and adjust equipment components as required. ...
Be an early applicant!
Posted
a month ago
Electrical Technician
MYR3,000 - MYR4,000 Per Month
Puchong, 47100
Near Train Station
- Support robotics programming, installation, and servicing.
- Carry out testing and commissioning of electrical systems and equipment.
- Read and design electrical drawings, wiring diagrams, and schematics. ...
Posted
8 days ago
MYR1,850 - MYR3,500 Per Month
+Additional Compensation
Fresh Graduates
14110 Simpang Ampat, Simpang Ampat
- Troubleshoot and repair electrical wiring issues, identifying and resolving faults.
- Read and interpret technical drawings, wiring diagrams, and specifications.
- Maintain a clean and organized work area, ensuring proper tool and material management. ...
Be an early applicant!
Posted
15 days ago
MYR2,000 - MYR2,500 Per Month
- Conducting regular maintenance checks on air conditioning systems.
- Cleaning air filters, coils, and other components.
- Lubricating moving parts to ensure smooth operation. ...
Be an early applicant!
Posted
18 hours ago
MYR2,000 - MYR2,800 Per Month
Fresh Graduates
- Assist with site coordination and inspection.
- Prepare project documents and reports.
- Perform other duties as assigned. ...
Be an early applicant!
Posted
17 hours ago
MYR5,000 - MYR6,000 Per Month
KL City, WP Kuala Lumpur
Near Train Station
- Coordinate with clients, consultants, subcontractors, suppliers and internal project teams on quality-related matters.
- Conduct and coordinate inspection, testing and quality surveillance at project sites.
- Review and verify material approvals, technical submissions, inspection reports, test certificates and quality documentation. ...
Be an early applicant!
Posted
14 hours ago
MYR2,300 - MYR3,500 Per Month
- Follow all safety procedures, SOPs, and work instructions.
- Record maintenance activities and equipment issues accurately.
- Report recurring equipment issues or abnormal conditions for further investigation and improvement. ...
Be an early applicant!
Posted
2 days ago
MYR2,000 - MYR3,000 Per Month
- Assist with the installation of solar panels on rooftops and ground-mounted structures
- Collaborate with senior technicians and engineers on system upgrades, retrofits and expansions
- Ensure installations are completed according to project specifications and timelines ...
Posted
2 days ago
MYR3,000 - MYR6,000 Per Month
Near Train Station
- Record of stock take, parts, tools, and storage parts for the purpose on ensuring availability in safe operating condition.
- Responsible on reporting on maintenance activities to the superior or the head of department.
- Ensure safe and proper operational on the maintenance of equipment. ...
Be an early applicant!
Posted
4 days ago
MYR4,000 - MYR6,000 Per Month
Petaling Jaya, 47800
Near Train Station
- Ensure compliance with safety regulations and procedures.
- Respond to electrical emergencies and outages.
- Maintain accurate records of maintenance activities and repairs. ...
Posted
2 days ago
MYR2,000 - MYR2,800 Per Month
+Additional Compensation
Fresh Graduates
Tebrau, Johor
- Troubleshooting
- Installation and wiring of Radio Frequency antenna
- Programming radio frequency ...
Posted
9 hours ago
MYR2,300 - MYR3,000 Per Month
Near Train Station
- Undertake any or other duties and responsibilities given by supervisor
- Troubleshoot, repair and service copier machines
- To attend and solve technical problem of copier machines ...
Posted
16 days ago
MYR3,000 - MYR5,000 Per Month
- Assist the chief engineer office to complete the method statement's inspect and test plan.
- Supervise the implementation of quality management standardization and the rectification of quality issues.
- Complete other tasks as assigned by leader. ...
Posted
17 days ago
MYR2,800 - MYR3,500 Per Month
Fresh Graduates
Near Train Station
- Product Video & Technical Content – Support the preparation of product demonstration videos, technical presentations and other product-related content.
- Customer Technical Support – Respond to customer enquiries and provide accurate information regarding product specifications, applications and operation.
- Product Testing & Verification – Conduct in-house product testing, performance verification and basic troubleshooting to ensure product quality and compliance. ...
Posted
18 days ago
MYR3,000 - MYR7,000 Per Month
Near Train Station
- Perform system sizing and select appropriate PV modules, inverters, cables, protection devices, and other electrical components.
- Ensure solar system designs comply with relevant electrical standards, technical requirements, and project specifications.
- Prepare design calculations, material specifications, and Bills of Quantities (BOQ) where required. ...
Be an early applicant!
Posted
11 days ago
MYR3,000 - MYR5,000 Per Month
- · Prepare and operate NDT equipment and ensure the equipment is properly calibrated and in good working condition.
- · Ensure all inspection results comply with the applicable acceptance criteria and quality requirements.
- · Maintain proper identification and traceability of inspected materials and components. ...
Posted
15 days ago
MYR3,000 - MYR5,000 Per Month
Fresh Graduates
Near Train Station
- Read and interpret blueprints, schematics, and technical manuals.
- Ensure compliance with safety regulations and industry standards.
- Respond to emergency service calls and provide timely repairs. ...
Posted
10 days ago
Undisclosed
Fresh Graduates
- Design optimal layouts for electrical control boxes, ensuring precise wire sizing and implementing circuit protection mechanisms as per system requirements.
- Collaborate closely with the Purchasing Department to track and ensure timely delivery of all necessary components for machine assembly and deployment.
- Provide clear and concise instructions to the Assembly regarding the wiring and integration of electrical components within the machine. ...
Be an early applicant!
Posted
5 days ago
MYR2,500 - MYR4,500 Per Month
Jalan Neutron, 42700
- Maintain accurate production records and logs, documenting process variables, material usage, and quality control results for reporting and analysis purposes.
- Adhere to all safety protocols and environmental regulations within the pulping department, ensuring a safe working environment and responsible waste management.
- Collaborate with other production teams and maintenance staff to coordinate pulping operations with upstream and downstream processes, ensuring smooth workflow and efficient material transfer. ...
Posted
11 days ago
Quality & Warehouse Technician
MYR2,500 - MYR4,000 Per Month
Near Train Station
- Program and operate Portable Coordinate Measuring Machines to inspect parts received from suppliers.
- Perform positive material identification, testing, measuring, and other verification activities as required.
- Prepare inspection reports and document inspection results, findings, and non-conformances. ...
Posted
5 days ago
Electrical & Instrumentation Technician
MYR2,200 - MYR3,800 Per Month
Near Train Station
- Prepare calibration records, service reports, and relevant documentation.
- Identify technical issues and provide appropriate solutions.
- Coordinate with project teams and customers at site. ...
Posted
23 days ago
Undisclosed
- Prepare materials:Load, unload, move and cut materials needed for upcoming projects.
- Enforce safety:Adhere strictly to occupational health and safety regulations, including using proper PPE.
Be an early applicant!
Posted
a month ago
MYR2,500 - MYR3,500 Per Month
Fresh Graduates
Near Train Station
- To measure casting and machining parts
- To identify and re-measure for NG dimensions
- To identify and prepare CMM jigs concept design ...
Posted
17 days ago
Undisclosed
- Monitor equipment performance and provide equipment improvement plans
- Project : Individual to own 1 project for Safety/UPH Improvement/Cost reduction/Minimize downtime
- Equipment downtime control ...
Be an early applicant!
Posted
a month ago
MYR4,500 - MYR5,500 Per Month
Tebrau, Johor
- As Trainer for Subordinate
- To monitor project quality plan, work program and assist Project Manager in monitoring project cash flow & progressive claim preparation.
- Provide oversight in managing all necessary resources throughout the entire project from start-up through closeout and ensure that owner’s expectation is met. ...
Posted
a month ago
Undisclosed
- Ensure all the workshop facility and systems meet the Suruhanjaya Tenaga Malaysia statutory regulations and safety standards.
- Diagnose the root cause and resolving equipment maintenance issues.
- Responsible for coordinating and communicate to relevant parties on breakdowns, repairing jobs and preventive maintenance. ...
Be an early applicant!
Posted
a month ago
MYR2,200 - MYR3,500 Per Month
+Additional Compensation
Near Train Station
- Collaborate with internal teams and external stakeholders to gather information and resolve technical problems.
- Maintain accurate and confidential records of all investigation activities.
- Stay updated on the latest technologies and investigative techniques in the security and personal safety field. ...
Posted
8 days ago
Undisclosed
- Responsibilities:
- Costing Estimation Engineer: Determining best production method based on engineering drawings. Estimate production timing for various process like 3 and 5 axis CNC milling, CNC lathe, Mill-turn and Wire-EDM. Continuously improvement to optimize production methods and costing.
- CAM Programming Engineer: Create CAM programs for complex parts for 3 axis CNC milling and CNC Lathe. You are responsible for the selection of the best tool path, cutting tools and cutting strategies. You will design your own production jigs. ...
Posted
a month ago
Systems Support Engineer
MYR3,500 - MYR4,900 Per Month
Fresh Graduates
- Assist customers in resolving technical issues using internal knowledge resources.
- Ensure all support cases are handled within the agreed service level (SLA).
- Prepare service reports and maintain proper documentation after each support assignment. ...
Posted
a month ago