300+ Technician Ii Jobs in Pulau Pinang - September 2026 - High Salaries

Showing 360 jobs results for "technician ii" in Pulau Pinang
Never miss any updates for Technician Ii jobs in Pulau Pinang
MYR5,500 - MYR6,300 Per Month
  • Read design plans, tolerances, and specifications for products and machinery.
  • Exercises judgment in recommending suppliers, methods and techniques for obtaining solutions to manager.
  • Documents selection of components/subassemblies to deliver required performance and compliance specifications. ...
Posted
2 months ago
MYR2,300 - MYR3,500 Per Month
  • Handle customer complaints and internal quality issues, including conducting root cause analysis and implementing corrective actions.
  • Participate in New Product Introduction (NPI)meetings and develop and establish appropriateQuality Plans (QP).
  • Provide technical support for Product Certification (PC), PPS, and the preparation and formatting of Load and Compression Test requirements and results. ...
Quality Control (QC) and ISO 9001:2015 knowledge. Strong problem-solving
+8

Be an early applicant!

Posted
2 days ago
MYR5,000 - MYR6,000 Per Month
  • Quality issue analysis: Coordinate the team, use tools such as 5Why, fishbone diagram, and 8D report to conduct root cause analysis on customer complaints or internal non-conforming products, formulate corrective and preventive measures, track and verify the closed-loop effect, and write reports.
  • Quality Data Management: Query, analyze or output production quality data (such as pass rate, failure rate, MSA) through tools like MES and Minitab, monitor production conditions, and confirm improvement directions.
  • Quality Training and Awareness Enhancement: Develop quality awareness training materials, carry out QCC (Quality Control Circle) activities, and enhance the quality responsibility of all staff. ...
Quality Control Data Analysis
+3

Be an early applicant!

Posted
3 days ago
MYR5,000 - MYR6,000 Per Month
  • Quality issue analysis: Coordinate the team, use tools such as 5Why, fishbone diagram, and 8D report to conduct root cause analysis on customer complaints or internal non-conforming products, formulate corrective and preventive measures, track and verify the closed-loop effect, and write reports.
  • Quality Data Management: Query, analyze or output production quality data (such as pass rate, failure rate, MSA) through tools like MES and Minitab, monitor production conditions, and confirm improvement directions.
  • Quality Training and Awareness Enhancement: Develop quality awareness training materials, carry out QCC (Quality Control Circle) activities, and enhance the quality responsibility of all staff. ...
Quality Control Data Analysis
+3

Be an early applicant!

Posted
2 days ago
High Opportunity
premium banner
Undisclosed
  • Work closely with Electrical, Control, and Software Engineers to integrate mechanical designs into complete automation solutions.
  • Generate bill of materials (BOMs) and support the purchasing team with specifications.
  • Involve in concept development, prototyping, and design reviews. ...
SolidWorks AutoCAD
+14
Posted
a month ago
Undisclosed
  • Coordinate with internal team of QA department and customer to perform machine buyoff.
  • Contributes to team effort by accomplishing related result as needed.
  • Monitoring and coordinating project schedule starting from the PO is received and until the project is delivered from Greatech. ...

Be an early applicant!

Posted
11 days ago
MYR4,000 - MYR6,000 Per Month
  • Read and interpret electrical schematics, panel layout drawings, wiring diagrams, and pneumatic diagrams.
  • Perform electrical I/O checking, continuity testing, insulation testing, and functional verification.
  • Troubleshoot electrical, control, and wiring issues during machine assembly and commissioning. ...

Be an early applicant!

Posted
24 days ago
premium banner
MYR1,700 - MYR2,300 Per Month
Fresh Graduates
  • Perform product inspection as per provided checklists and process
  • Clarify and explain the actual condition of the product to the customer accurately
  • Perform price negotiation and effective communication with the customer ...
Rider Support Communication Skills
+3
Posted
7 days ago
Undisclosed
  • Verify machine settings and ensure calibration is correct before starting operations.
  • Adjust machine parameters as needed to maintain optimal performance.
  • Process Control and Documentation: ...

Be an early applicant!

Posted
a month ago
premium banner
MYR2,500 - MYR3,800 Per Month
Fresh Graduates
  • Review technical specifications, drawings, and project documentation.
  • Oversee fabrication, installation, testing, commissioning, FAT, and SAT activities.
  • Identify project risks and implement corrective actions when required. ...
Posted
15 days ago
MYR4,000 - MYR5,000 Per Month
  • Provide helpdesk support for employees (hardware, software, connectivity issues)
  • Ensure regular system updates, antivirus protection, backups, and IT asset management
  • Manage IT inventory, procurement, and lifecycle of equipment ...
TCP/IP VLAN
+15
Posted
14 days ago
Undisclosed
  • Service, trouble shoot and repair machines / equipment & report major problems and emergencies to Superior with appropriate recommendations.
  • Review of workshops spare parts inventories & initiates / raise purchase requisition.
  • Ensure the cleanliness of workshop is maintained to the highest level at all time. ...
Welding Troubleshooting
+3
Posted
a month ago
Up to MYR2,000 Per Month
Fresh Graduates
  • Performs other related duties or task as assigned by the superior from time to time in an efficient, professional, and courteous.
  • In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
  • In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages. ...
Safety regulations Preventive maintenance
+1

Be an early applicant!

Posted
2 months ago
premium banner
MYR2,500 - MYR3,800 Per Month
Fresh Graduates
  • Collaborate with cross-functional teams to identify and implement Io solutions that drive business value
  • Stay up-to-date with the latest IoT/AI technologies, trends, and best practices
  • Provide technical support and training to end-users and stakeholders ...
• Proficiency in IoT protocols such as MQTT CoAP
+8
Posted
14 days ago
MYR5,000 - MYR7,000 Per Month
  • New software design and implement for automation machine applications to enhance machine capability and improve performances.
  • Perform any other related tasks as instructed by the management from time to time.
  • Develop software verification plans and test procedures. ...
Posted
24 days ago
Up to MYR2,000 Per Month
Fresh Graduates
  • Performs other related duties or task as assigned by the superior from time to time in an efficient, professional, and courteous.
  • In charge of light fixtures, electrical switch boards and electrical meters, screw air compressors and gauss strength checking based on routine schedules.
  • In charge of planning maintenance and servicing for electrical switchboards during Mill stoppages. ...
Safety regulations Preventive maintenance
+1
Posted
2 months ago
Undisclosed
  • Process documents improvement.
  • Prepare process equipment for mass production & technical support to Production for process improvement.
  • Buy-off documentation including customer information and internal document before mass production. ...
Posted
a month ago
MYR1,700 - MYR1,800 Per Month
  • Operation of measurement equipment such as curve tracer, oscilloscope and multimeters for supporting in-house calibration activities.
  • Know-how in reliability stress testing e.g. Environmental, Electrical / Functional, and acoustics stress testing.
  • Reliability engineering support responsibilities may be assigned on an as needed basis. ...
Posted
2 months ago
Undisclosed
  • Liaise with supplier and customer related to design.
  • Project Management.
  • Provide technical support to internal and external customer. ...

Be an early applicant!

Posted
a month ago
Undisclosed
  • Verify machine settings and ensure calibration is correct before starting operations.
  • Adjust machine parameters as needed to maintain optimal performance.
  • Process Control and Documentation: ...

Be an early applicant!

Posted
a month ago
MYR3,000 - MYR5,000 Per Month
Fresh Graduates
  • Prepare technical documents and reports when required.
  • Support product improvement and development.
  • We are looking for an Engineer who is proficient in Mandarin and Japanese to communicate effectively with Mandarin- and Japanese-speaking clients and support our motorcycle and bicycle chain products. ...
Manufacturing Operations Quality Control
+4
Posted
15 days ago
Undisclosed
  • Any other tasks or projects assigned by superiors.
  • Assist in EFAR unit verification.
  • Monitor FVI yield performance. ...
Posted
a month ago
MYR700 - MYR800 Per Month
  • Comprehensive training and hands-on guidance provided.
  • Opportunity to discover your talents and work alongside senior experts and young professionals.
  • setting up, training, troubleshooting, and testing our software, providing expert advice and solutions to customer issues, and ensuring all tickets are resolved promptly and to the client's satisfaction. ...
Posted
17 days ago
MYR3,000 - MYR4,000 Per Month
  • Operating failure analysis equipment to perform the failure analysis task.
  • Primary job duties are to maximize output using constraint management Techniques while sustaining process, equipment issues, training and cross training cluster members while building a self-sustaining cluster team.
  • Multi-tasked responsibilities include, non-standard processing and problem-solving, as well as actual processing of state-of-the-art device. ...
Posted
2 months ago
Undisclosed
  • Infrastructure & Engineering Excellence: Manage infrastructure and CI/CD pipelines while ensuring scalability, performance, security, and high code quality through best practices and governance.
  • The context is automation and AI in the manufucturing industry.
  • Versatile Software Project Delivery (Core Responsibility): ...
Artificial Intelligence Machine Learning
+1
Posted
3 months ago
MYR3,000 - MYR4,500 Per Month

George Town, Pulau Pinang

  • Preparing submission documents, follow up, making compliance to authorities' requirements and comments in order to obtain approval or permit to start work and grant CCC upon completion.
  • Attending meetings, site visit, inspections and testing to ensure the site works are in compliance and of good quality.
  • Lead and monitor designer and draftperson to make sure the deliverables are meeting project's needs and mistake-free. ...
Structural Analysis Project Management
+1
Posted
3 days ago
MYR2,500 - MYR3,500 Per Month
  • Maintain a clean, organized, and safe working environment.
  • Assemble electrical and electronic components according to technical drawings and schematics.
  • Perform wiring, soldering, and testing of electrical components. ...
Electrical Wiring Mechanical Assembly
+1
Posted
10 days ago
MYR2,000 - MYR2,500 Per Month
  • Report machine breakdowns or abnormalities to the supervisor promptly
  • Ensure compliance with safety procedures during machine operation and maintenance
  • Support production team to achieve daily production targets ...

Be an early applicant!

Posted
19 hours ago
MYR5,000 - MYR6,000 Per Month
  • Quality issue analysis: Coordinate the team, use tools such as 5Why, fishbone diagram, and 8D report to conduct root cause analysis on customer complaints or internal non-conforming products, formulate corrective and preventive measures, track and verify the closed-loop effect, and write reports.
  • Quality Data Management: Query, analyze or output production quality data (such as pass rate, failure rate, MSA) through tools like MES and Minitab, monitor production conditions, and confirm improvement directions.
  • Quality Training and Awareness Enhancement: Develop quality awareness training materials, carry out QCC (Quality Control Circle) activities, and enhance the quality responsibility of all staff. ...
Quality Control Data Analysis
+3

Be an early applicant!

Posted
2 days ago

Job searches related to “Technician Ii”