100+ Software Jobs in Pulau Pinang - September 2026 - High Salaries
Showing 137 jobs results for
"software"
in Pulau Pinang
MYR1,700 - MYR2,500 Per Month
- Ensure works are performed according to technical specifications, approved procedures and safety requirements.
- Ensure CCTV systems and related equipment are installed and maintained properly.
- Report work completion status, technical issues, defects and site conditions to the Senior Technical Executive / Team Leader. ...
-Willing and able to travel between project sites within the Northern Zone.
-Willing to work after hours
+4
Be an early applicant!
Posted
25 days ago
Undisclosed
- Conduct training for assembly technicians
- Analysis of the training data for any improvement needed
- Maintain records of trainee progress and performance ...
Be an early applicant!
Posted
15 days ago
Undisclosed
Be an early applicant!
Posted
15 days ago
Undisclosed
Be an early applicant!
Posted
15 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. Assist in the development and implementation of supplier management programs. ...
Be an early applicant!
Posted
15 days ago
Technical Service Engineer (Mandarin Speaker)
MYR2,500 - MYR4,000 Per Month
George Town, Pulau Pinang
- Maintain good relationships with customers and provide quality after-sales support.
- Liaise and work closely with customers to address service concerns and resolve technical issues.
- Take charge of assigned products and ensure smooth operations while providing continuous service support. ...
Posted
16 days ago
MYR2,500 - MYR3,500 Per Month
- Plan and coordinate site works, technician assignments and maintenance activities.
- Ensure efficient allocation of manpower, tools, equipment and technical resources.
- Coordinate with relevant teams to resolve site-related technical issues. ...
Posted
25 days ago
Undisclosed
- Liaise with internal team in reviewing the incoming material rejection from IQC and production with disposition action and feedback to supplier if rejection proved to be valid.
- Issue SCAR to supplier non conformance incoming lot and drive the supplier for root cause and corrective action(s) (RCCA) (8D, 5-Whys, FMEA, SPC) to eliminate recurring quality issues.
- Conduct an investigation and complete justification report on rejection feedback by IQC, production and customer side if the issue is caused by the supplier side. ...
Posted
a month ago
MYR6,000 - MYR8,000 Per Month
George Town, Pulau Pinang
- Use OpenAI Codex or similar AI coding tools to accelerate development, debugging, refactoring, and documentation.
- Review and validate AI-generated code before use.
- Use GitHub for version control, branches, commits, pull requests, code reviews, and change tracking. ...
Posted
a month ago
Undisclosed
- Must display initiative and ability to work in small multi-disciplinary teams including Customers, Project Managers and Project Team.
- On-site support for software and programming related issues.
- Travelling to set-up & support buy-off activity is necessary. ...
Be an early applicant!
Posted
15 days ago
MYR3,000 - MYR4,000 Per Month
- Maintaining routing in SAP system
- Reviewing and preparing digital harness board drawing
- Reviewing and submitting Technical Queries (TQ) ...
Posted
a month ago
Undisclosed
- Participate and cooperate within the team to complete overall task efficiently.
- Check work after completion of each operation in job and/or completed job to ensure assembly is complete per drawing, that there are no defects and that the work area is clean.
- Ensure or assist superior in ensuring that defined project milestones such as SAT, ESSO, delivery, FAT, etc. are met. ...
Be an early applicant!
Posted
15 days ago
Undisclosed
- Process documents improvement.
- Prepare process equipment for mass production & technical support to Production for process improvement.
- Buy-off documentation including customer information and internal document before mass production. ...
Posted
a month ago
MYR5,500 - MYR6,300 Per Month
- Read design plans, tolerances, and specifications for products and machinery.
- Exercises judgment in recommending suppliers, methods and techniques for obtaining solutions to manager.
- Documents selection of components/subassemblies to deliver required performance and compliance specifications. ...
Posted
2 months ago
MYR2,500 - MYR3,300 Per Month
- Operate and handle electronic measurement equipment such as oscilloscopes, power supplies, and electronic loads
- Perform electronic assembly tasks including hand soldering, solder touch-up, and PCBA rework
- Compile, record, and maintain accurate test data and measurement results in proper documentation format ...
Posted
2 months ago
MYR3,500 - MYR5,000 Per Month
- Inspect finished products to ensure they meet quality standards
- Collaborate with the production team to identify and resolve any issues that arise during the manufacturing process
- Maintain accurate records and documentation related to the production process ...
Posted
2 months ago
MYR6,000 - MYR8,000 Per Month
George Town, Pulau Pinang
- Advise the Project Manager and Construction Manager on issues causing delays and assist in preparing the necessary contractual correspondence to Clients and Subcontractors.
- Prepare mini work programs or schedules as required, based on the Two Weeks Look Ahead Plan provided by the Construction Manager.
- Monitor the Material Wastage Report and take preventive or corrective actions where necessary. ...
Posted
a month ago
MYR5,000 - MYR7,000 Per Month
- New software design and implement for automation machine applications to enhance machine capability and improve performances.
- Perform any other related tasks as instructed by the management from time to time.
- Develop software verification plans and test procedures. ...
Posted
a month ago
Undisclosed
- Establish WI for processes plan / machine Set-up.
- Guide machinist on machine setup, operation as per the program generated.
- Ensure the program and WI of the program is stored and managed properly in the system. ...
Be an early applicant!
Posted
15 days ago
Undisclosed
- Perform detailed capacity analysis and equipment utilization tracking.
- Collaborate with production and maintenance teams to integrate new equipment or fixtures.
- Prepare technical reports and presentations regarding process efficiency for senior management. ...
Be an early applicant!
Posted
15 days ago
Undisclosed
- To ensure the production processes are well controlled on process times, cycle time and material usage.
- To lead production machinists and coordinate failure quality issue for root cause analysis, correction and preventive actions.
- To ensure the production safety and 5S is documentation (WI) implemented and reviewed from time to time for the machinist to follow. ...
Be an early applicant!
Posted
15 days ago
Undisclosed
Be an early applicant!
Posted
15 days ago
Undisclosed
- Report internal audit findings, follow up & close the Non-Compliance Report/Opportunity For Improvement(OFI) issued.
- Conduct internal auditor training & other QMS related trainings.
- Change control monitoring, reporting & improvement. ...
Be an early applicant!
Posted
15 days ago
Undisclosed
- On time fill up the production document accurately and MES system timely and clearly.
- To ensure production safety & 5S is carried out and maintained.
- Other duties and assignments as instructed by superiors from time to time. ...
Be an early applicant!
Posted
15 days ago
Undisclosed
- Ensure that parts issued are free of visible defects.
- Other duties and assignments as instructed by superiors from time to time.
- To comply to all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided bythe company.
Be an early applicant!
Posted
15 days ago
Undisclosed
- Coordinate with internal team of QA department and customer to perform machine buyoff.
- Contributes to team effort by accomplishing related result as needed.
- Monitoring and coordinating project schedule starting from the PO is received and until the project is delivered from Greatech. ...
Be an early applicant!
Posted
15 days ago
Undisclosed
Be an early applicant!
Posted
15 days ago
Undisclosed
- Perform software programming, UI design, software architecture design, and software performance optimization on PC based vision platform.
- Responsible for installation and support on programming and fine tuning vision inspection systems at factory and customer site.
- Accountable for project planning, delivery schedules and project realization project time estimation including customer site support and training. ...
Be an early applicant!
Posted
15 days ago
MYR2,000 - MYR2,500 Per Month
- Exhibits effective communication skills, with the ability to engage in cross-team discussions and provide feedback on any questionable measurements.
- Demonstrates sound judgment in determining whether the provided information is sufficient to proceed with approval.
- Maintains a high level of attention to detail and accuracy when validating and matching key information within the recipe. ...
Posted
2 months ago
Undisclosed
Fresh Graduates
- Design optimal layouts for electrical control boxes, ensuring precise wire sizing and implementing circuit protection mechanisms as per system requirements.
- Collaborate closely with the Purchasing Department to track and ensure timely delivery of all necessary components for machine assembly and deployment.
- Provide clear and concise instructions to the Assembly regarding the wiring and integration of electrical components within the machine. ...
Be an early applicant!
Posted
15 days ago
Job searches related to “Software”