29 Root Cause Analysis Jobs in Pulau Pinang - September 2026 - High Salaries
Showing 29 jobs results for
"root cause analysis"
in Pulau Pinang
Company Confidential
MYR5,000 - MYR6,000 Per Month
- Quality issue analysis: Coordinate the team, use tools such as 5Why, fishbone diagram, and 8D report to conduct root cause analysis on customer complaints or internal non-conforming products, formulate corrective and preventive measures, track and verify the closed-loop effect, and write reports.
- Quality Data Management: Query, analyze or output production quality data (such as pass rate, failure rate, MSA) through tools like MES and Minitab, monitor production conditions, and confirm improvement directions.
- Quality Training and Awareness Enhancement: Develop quality awareness training materials, carry out QCC (Quality Control Circle) activities, and enhance the quality responsibility of all staff. ...
Be an early applicant!
Posted
6 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. Assist in the development and implementation of supplier management programs. ...
Be an early applicant!
Posted
14 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. ...
Be an early applicant!
Posted
20 days ago
Undisclosed
- Liaise with internal team in reviewing the incoming material rejection from IQC and production with disposition action and feedback to supplier if rejection proved to be valid.
- Issue SCAR to supplier non conformance incoming lot and drive the supplier for root cause and corrective action(s) (RCCA) (8D, 5-Whys, FMEA, SPC) to eliminate recurring quality issues.
- Conduct an investigation and complete justification report on rejection feedback by IQC, production and customer side if the issue is caused by the supplier side. ...
Posted
a month ago
Quality Assurance (QA) Manager
MYR5,000 - MYR7,000 Per Month
- Review and monitor inspection reports, quality records, and production quality performance.
- Handle customer complaints, non-conformities, and quality issues.
- Lead CAPA, 8D, Root Cause Analysis, 5 Why, and corrective/preventive actions. ...
Posted
2 days ago
MYR2,300 - MYR3,500 Per Month
- Handle customer complaints and internal quality issues, including conducting root cause analysis and implementing corrective actions.
- Participate in New Product Introduction (NPI)meetings and develop and establish appropriateQuality Plans (QP).
- Provide technical support for Product Certification (PC), PPS, and the preparation and formatting of Load and Compression Test requirements and results. ...
Be an early applicant!
Posted
5 days ago
Undisclosed
- Maintain and update specifications to ensure compliance of operations.
- Source, evaluate, characterize, procure and implement material changes for quality, yield and cost improvement.
- Conduct engineering evaluation and characterization via usage of DOE/FMEA methods. ...
Be an early applicant!
Posted
a month ago
MYR3,800 - MYR5,000 Per Month
- Establish priority list on gaps/opportunities with effective closure plan.
- Drive effective work method and solution through automation and poka yoke solution.
- Provide OPL (One Point Lesson) and certification test to ensure all floor personnel are adequately trained and qualified. ...
Posted
2 months ago
Undisclosed
- Work on LYT Reduction or occurrence issue &, following up of corrective action & preventive action implemented.
- Audit activities to be consistently carry out in the production of ensure product quality sustainability & compliance to customer requirement.
- Coordinating with suppliers to ensure that materials meet the quality standards specified by the company ...
Posted
a month ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead process validation activities (IQ/OQ/PQ, SPC, PFMEA, Control Plans, GR&R).
- Own production performance metrics including yield, throughput, cycle time, quality, and cost.
- Drive root cause analysis, CAPA, and continuous improvement initiatives. ...
Be an early applicant!
Posted
7 days ago
MYR3,000 - MYR3,600 Per Month
- Assess material properties and mechanical characteristics of components for defect analysis.
- Use analytical tools such as
- Parametric Analyzer (I/V analysis), Keithley Meter, TDR, EOTPR ...
Posted
2 months ago
Undisclosed
- Support engineering build requests, ramp ups and platform extensions.
- Monitor and improving the yield of DA/GA process, including cost reduction activities.
- Support on the TMM and TMS activities ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Continuously improve inspection algorithms based on process capability and defect trends.
- Support AOI setup and qualification for new PQFN package introductions.
- Develop inspection recipes according to product specifications and customer requirements. ...
Posted
a month ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Interfaces with personnel on production, QA and other support groups regarding product/process related problems and disposition.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Posted
a month ago
Undisclosed
- Monitoring on hold lot disposition and provide communication with engineer in order to not impact daily assembly output.
- Maintain all housekeeping / 5s engineering station and tooling’s, to ensure compliance to safety rules.
- Monitor all processes, resolve all products issues and coordinate with production and equipment to reduce downtime and getting better product quality. ...
Posted
a month ago
Undisclosed
- Apply core engineering principles to streamline manufacturing workflows and eliminate bottlenecks.
- Evaluate production variables and operational constraints to identify areas for improvement.
- Develop, present, and implement engineering solutions to optimize manufacturing processes. ...
Posted
2 months ago
Undisclosed
- Process documents improvement.
- Prepare process equipment for mass production & technical support to Production for process improvement.
- Buy-off documentation including customer information and internal document before mass production. ...
Posted
3 months ago
Undisclosed
- Assigning and monitoring maintenance tasks for technicians.
- Supporting technicians during complex maintenance and repair activities.
- Conducting root-cause analysis for repeated breakdowns and major equipment failures. ...
Be an early applicant!
Posted
20 days ago
MYR3,000 - MYR6,000 Per Month
- Monitor manufacturing processes to ensure product quality and process stability.
- Investigate quality issues, conduct root cause analysis, and implement corrective and preventive actions (CAPA).
- Work with production and engineering teams to improve manufacturing processes and reduce defects. ...
Posted
2 months ago
MYR4,000 - MYR4,999 Per Month
- Review and analyze process data to improve cycle time, productivity, and quality.
- Conduct shift handovers and daily production meetings with team leaders.
- Schedule and deploy manpower efficiently based on production needs. ...
Posted
2 months ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
- Collaborate with cross-functional teams, including quality control and maintenance, to resolve production-related problems and ensure continuous improvement.
- Gain hands-on experience with plastic injection molding processes and equipment, including injection molding machines and associated tooling.
- Contribute to data collection and analysis related to production output, cycle times, and defect rates to identify areas for optimization. ...
Posted
7 days ago
MYR3,000 - MYR4,000 Per Month
- Operating failure analysis equipment to perform the failure analysis task.
- Primary job duties are to maximize output using constraint management Techniques while sustaining process, equipment issues, training and cross training cluster members while building a self-sustaining cluster team.
- Multi-tasked responsibilities include, non-standard processing and problem-solving, as well as actual processing of state-of-the-art device. ...
Posted
2 months ago
MYR3,000 - MYR4,000 Per Month
- Operating failure analysis equipment to perform the failure analysis task.
- Primary job duties are to maximize output using constraint management Techniques while sustaining process, equipment issues, training and cross training cluster members while building a self-sustaining cluster team.
- Multi-tasked responsibilities include, non-standard processing and problem-solving, as well as actual processing of state-of-the-art device. ...
Posted
2 months ago
Undisclosed
- Maintaining routing in SAP system
- Reviewing and preparing digital harness board drawing
- Reviewing and submitting Technical Queries (TQ) ...
Posted
3 months ago
Undisclosed
- To perform product and process audit, identifies control methods for manufacturing processes
- Monitor, report and respond to results of incoming inspections and finished goods audit
- Participates in new product introductions and validates processes through Quality Assurance ...
Posted
3 months ago
Undisclosed
- Maintaining routing in SAP system
- Reviewing and preparing digital harness board drawing
- Reviewing and submitting Technical Queries (TQ) ...
Posted
3 months ago
MYR1,800 - MYR2,800 Per Month
Fresh Graduates
- Collaborate with production teams to address quality issues, provide feedback on defects, and support continuous improvement initiatives.
- Maintain detailed records of inspections, test results, and quality data, ensuring accuracy and completeness for traceability and analysis.
- Participate in internal audits and quality reviews, contributing to the overall effectiveness of the Quality Management System. ...
Posted
a month ago