30 Root Cause Analysis Jobs in Pulau Pinang - October 2026 - High Salaries
Showing 30 jobs results for
"root cause analysis"
in Pulau Pinang
Company Confidential
MYR5,000 - MYR6,000 Per Month
- Quality issue analysis: Coordinate the team, use tools such as 5Why, fishbone diagram, and 8D report to conduct root cause analysis on customer complaints or internal non-conforming products, formulate corrective and preventive measures, track and verify the closed-loop effect, and write reports.
- Quality Data Management: Query, analyze or output production quality data (such as pass rate, failure rate, MSA) through tools like MES and Minitab, monitor production conditions, and confirm improvement directions.
- Quality Training and Awareness Enhancement: Develop quality awareness training materials, carry out QCC (Quality Control Circle) activities, and enhance the quality responsibility of all staff. ...
Be an early applicant!
Posted
6 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. Assist in the development and implementation of supplier management programs. ...
Be an early applicant!
Posted
22 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Liaise with internal team in reviewing the incoming material rejection from IQC and production with disposition action and feedback to supplier if rejection proved to be valid.
- Issue SCAR to supplier non conformance incoming lot and drive the supplier for root cause and corrective action(s) (RCCA) (8D, 5-Whys, FMEA, SPC) to eliminate recurring quality issues.
- Conduct an investigation and complete justification report on rejection feedback by IQC, production and customer side if the issue is caused by the supplier side. ...
Posted
a month ago
Quality Assurance (QA) Manager
MYR5,000 - MYR7,000 Per Month
- Review and monitor inspection reports, quality records, and production quality performance.
- Handle customer complaints, non-conformities, and quality issues.
- Lead CAPA, 8D, Root Cause Analysis, 5 Why, and corrective/preventive actions. ...
Posted
2 days ago
MYR2,300 - MYR3,500 Per Month
- Handle customer complaints and internal quality issues, including conducting root cause analysis and implementing corrective actions.
- Participate in New Product Introduction (NPI)meetings and develop and establish appropriateQuality Plans (QP).
- Provide technical support for Product Certification (PC), PPS, and the preparation and formatting of Load and Compression Test requirements and results. ...
Be an early applicant!
Posted
13 days ago
MYR3,500 - MYR5,000 Per Month
Fresh Graduates
- Support vendor quality management activities, including Vendor Corrective Action Requests (VCAR) and supplier performance monitoring.
- Drive continuous improvement with suppliers to enhance incoming material quality.
- Lead and supervise IPQC activities to ensure products comply with approved specifications and customer requirements. ...
Be an early applicant!
Posted
7 days ago
MYR3,800 - MYR5,000 Per Month
- Establish priority list on gaps/opportunities with effective closure plan.
- Drive effective work method and solution through automation and poka yoke solution.
- Provide OPL (One Point Lesson) and certification test to ensure all floor personnel are adequately trained and qualified. ...
Posted
2 months ago
MYR10,000 - MYR15,000 Per Month
George Town, Pulau Pinang
- Lead process validation activities (IQ/OQ/PQ, SPC, PFMEA, Control Plans, GR&R).
- Own production performance metrics including yield, throughput, cycle time, quality, and cost.
- Drive root cause analysis, CAPA, and continuous improvement initiatives. ...
Posted
15 days ago
Undisclosed
- Support engineering build requests, ramp ups and platform extensions.
- Monitor and improving the yield of DA/GA process, including cost reduction activities.
- Support on the TMM and TMS activities ...
Be an early applicant!
Posted
2 months ago
Undisclosed
- Maintain and update specifications to ensure compliance of operations.
- Source, evaluate, characterize, procure and implement material changes for quality, yield and cost improvement.
- Conduct engineering evaluation and characterization via usage of DOE/FMEA methods. ...
Be an early applicant!
Posted
2 months ago
MYR3,000 - MYR3,600 Per Month
- Assess material properties and mechanical characteristics of components for defect analysis.
- Use analytical tools such as
- Parametric Analyzer (I/V analysis), Keithley Meter, TDR, EOTPR ...
Posted
2 months ago
Undisclosed
- Continuously improve inspection algorithms based on process capability and defect trends.
- Support AOI setup and qualification for new PQFN package introductions.
- Develop inspection recipes according to product specifications and customer requirements. ...
Posted
2 months ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Interfaces with personnel on production, QA and other support groups regarding product/process related problems and disposition.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Posted
2 months ago
Undisclosed
- Monitoring on hold lot disposition and provide communication with engineer in order to not impact daily assembly output.
- Maintain all housekeeping / 5s engineering station and tooling’s, to ensure compliance to safety rules.
- Monitor all processes, resolve all products issues and coordinate with production and equipment to reduce downtime and getting better product quality. ...
Posted
2 months ago
Undisclosed
- Work on LYT Reduction or occurrence issue &, following up of corrective action & preventive action implemented.
- Audit activities to be consistently carry out in the production of ensure product quality sustainability & compliance to customer requirement.
- Coordinating with suppliers to ensure that materials meet the quality standards specified by the company ...
Posted
2 months ago
Undisclosed
- Apply core engineering principles to streamline manufacturing workflows and eliminate bottlenecks.
- Evaluate production variables and operational constraints to identify areas for improvement.
- Develop, present, and implement engineering solutions to optimize manufacturing processes. ...
Posted
2 months ago
Undisclosed
- Process documents improvement.
- Prepare process equipment for mass production & technical support to Production for process improvement.
- Buy-off documentation including customer information and internal document before mass production. ...
Posted
3 months ago
Undisclosed
- Assigning and monitoring maintenance tasks for technicians.
- Supporting technicians during complex maintenance and repair activities.
- Conducting root-cause analysis for repeated breakdowns and major equipment failures. ...
Be an early applicant!
Posted
a month ago
MYR3,000 - MYR6,000 Per Month
- Monitor manufacturing processes to ensure product quality and process stability.
- Investigate quality issues, conduct root cause analysis, and implement corrective and preventive actions (CAPA).
- Work with production and engineering teams to improve manufacturing processes and reduce defects. ...
Posted
2 months ago
MYR4,000 - MYR4,999 Per Month
- Review and analyze process data to improve cycle time, productivity, and quality.
- Conduct shift handovers and daily production meetings with team leaders.
- Schedule and deploy manpower efficiently based on production needs. ...
Posted
2 months ago
MYR3,500 - MYR5,000 Per Month
- Conducting customer business analysis and participate in customer performance reviews and improvement discussions,
- Participate in initial customer implementation meetings, site assessments, and solution walkthroughs,
- Assist in coordinating implementation activities such as developing timelines, maintaining action plans, supporting Gantt charts, cross‑referencing products, and preparing inventory setups (min/max, VMI, vending, and new location launches). ...
Be an early applicant!
Posted
21 hours ago
MYR3,500 - MYR5,000 Per Month
- Conducting customer business analysis and participate in customer performance reviews and improvement discussions,
- Participate in initial customer implementation meetings, site assessments, and solution walkthroughs,
- Assist in coordinating implementation activities such as developing timelines, maintaining action plans, supporting Gantt charts, cross‑referencing products, and preparing inventory setups (min/max, VMI, vending, and new location launches). ...
Be an early applicant!
Posted
21 hours ago
MYR5,000 - MYR6,000 Per Month
- Quality issue analysis: Coordinate the team, use tools such as 5Why, fishbone diagram, and 8D report to conduct root cause analysis on customer complaints or internal non-conforming products, formulate corrective and preventive measures, track and verify the closed-loop effect, and write reports.
- Quality Data Management: Query, analyze or output production quality data (such as pass rate, failure rate, MSA) through tools like MES and Minitab, monitor production conditions, and confirm improvement directions.
- Quality Training and Awareness Enhancement: Develop quality awareness training materials, carry out QCC (Quality Control Circle) activities, and enhance the quality responsibility of all staff. ...
Be an early applicant!
Posted
6 days ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
- Collaborate with cross-functional teams, including quality control and maintenance, to resolve production-related problems and ensure continuous improvement.
- Gain hands-on experience with plastic injection molding processes and equipment, including injection molding machines and associated tooling.
- Contribute to data collection and analysis related to production output, cycle times, and defect rates to identify areas for optimization. ...
Posted
15 days ago
MYR3,000 - MYR4,000 Per Month
- Operating failure analysis equipment to perform the failure analysis task.
- Primary job duties are to maximize output using constraint management Techniques while sustaining process, equipment issues, training and cross training cluster members while building a self-sustaining cluster team.
- Multi-tasked responsibilities include, non-standard processing and problem-solving, as well as actual processing of state-of-the-art device. ...
Posted
2 months ago
MYR3,000 - MYR4,000 Per Month
- Operating failure analysis equipment to perform the failure analysis task.
- Primary job duties are to maximize output using constraint management Techniques while sustaining process, equipment issues, training and cross training cluster members while building a self-sustaining cluster team.
- Multi-tasked responsibilities include, non-standard processing and problem-solving, as well as actual processing of state-of-the-art device. ...
Posted
2 months ago
Undisclosed
- Maintaining routing in SAP system
- Reviewing and preparing digital harness board drawing
- Reviewing and submitting Technical Queries (TQ) ...
Posted
3 months ago
Undisclosed
- To perform product and process audit, identifies control methods for manufacturing processes
- Monitor, report and respond to results of incoming inspections and finished goods audit
- Participates in new product introductions and validates processes through Quality Assurance ...
Posted
3 months ago
Undisclosed
- Maintaining routing in SAP system
- Reviewing and preparing digital harness board drawing
- Reviewing and submitting Technical Queries (TQ) ...
Posted
3 months ago