400+ Quality Control Jobs in Pulau Pinang - September 2026 - High Salaries
Showing 498 jobs results for
"quality control"
in Pulau Pinang
Quality Specialist (QA/QC) (Mandarin Speaker)
Undisclosed
- Meticulous, detail-oriented, and strong in maintaining quality standards and principles. Familiar with factory quality control practices and processes. Candidates with experience in new energy automotive components or precision component quality control will have an added advantage.
- Able to independently perform dimensional inspections, visual inspections, and record inspection data.
- Able to liaise directly with customers on quality-related matters, including customer audits, quality inquiries, and on-site audits. Proficient in preparing 8D reports, quality abnormality reports, corrective action reports, and following up to ensure effective closure. ...
Be an early applicant!
Posted
7 days ago
Undisclosed
- Daily job arrangement, resources allocation, utilization and capacity planning.
- Coverage area include in-process and out-going inspection (Follow site).
- Work with QA engineer to define the inspection flows and inspection instruction. ...
Be an early applicant!
Posted
11 days ago
Undisclosed
Be an early applicant!
Posted
11 days ago
Undisclosed
Be an early applicant!
Posted
11 days ago
Quality Assurance (QA) Manager
MYR5,000 - MYR7,000 Per Month
- Review and monitor inspection reports, quality records, and production quality performance.
- Handle customer complaints, non-conformities, and quality issues.
- Lead CAPA, 8D, Root Cause Analysis, 5 Why, and corrective/preventive actions. ...
Posted
18 hours ago
MYR1,700 - MYR2,000 Per Month
- Conduct finished product and final outgoing inspections.
- Complete QC inspection records.
- Identify, label and segregate non-conforming products. ...
Be an early applicant!
Posted
2 days ago
MYR1,900 - MYR2,500 Per Month
Fresh Graduates
- Maintain 5S at the working area
- Follow tasks and procedures specified in the Quality Management System (QMS)
- Perform other duties assigned by the superior ...
Be an early applicant!
Posted
13 days ago
MYR3,500 - MYR5,500 Per Month
- Source, develop, and validate inspection tools, gauges, and testing equipment.
- Support the creation and review of component specifications and quality requirements.
- Prepare test protocols, oversee qualification testing, issue reports, and approve components for production use. ...
Be an early applicant!
Posted
9 days ago
Undisclosed
Be an early applicant!
Posted
5 days ago
MYR1,800 - MYR2,200 Per Month
- Prepare the additives used for production as per .
- Make sure the weight of individual additive is correct before preparation and label the plastic bag accordingly.
- Update the additive stock card after preparation of additive. ...
Posted
2 months ago
MYR1,800 - MYR2,200 Per Month
- Prepare the additives used for production as per .
- Make sure the weight of individual additive is correct before preparation and label the plastic bag accordingly.
- Update the additive stock card after preparation of additive. ...
Posted
2 months ago
MYR1,800 - MYR2,200 Per Month
- Prepare the additives used for production as per .
- Make sure the weight of individual additive is correct before preparation and label the plastic bag accordingly.
- Update the additive stock card after preparation of additive. ...
Posted
2 months ago
MYR1,800 - MYR2,200 Per Month
- Prepare the additives used for production as per .
- Make sure the weight of individual additive is correct before preparation and label the plastic bag accordingly.
- Update the additive stock card after preparation of additive. ...
Posted
2 months ago
MYR1,800 - MYR2,200 Per Month
- Prepare the additives used for production as per .
- Make sure the weight of individual additive is correct before preparation and label the plastic bag accordingly.
- Update the additive stock card after preparation of additive. ...
Posted
2 months ago
Undisclosed
- Set up machines or make trial welds to make test runs and experimental products.
- Supervise fitting and assembly of structural frames in welding.
- Investigated quality issues and issued Non-Conformance Reports as necessary in order to prevent repeat issues. ...
Be an early applicant!
Posted
11 days ago
MYR1,800 - MYR2,200 Per Month
- Prepare the additives used for production as per .
- Make sure the weight of individual additive is correct before preparation and label the plastic bag accordingly.
- Update the additive stock card after preparation of additive. ...
Posted
2 months ago
MYR1,800 - MYR2,200 Per Month
- Prepare the additives used for production as per .
- Make sure the weight of individual additive is correct before preparation and label the plastic bag accordingly.
- Update the additive stock card after preparation of additive. ...
Be an early applicant!
Posted
2 months ago
Quality Control Inspector
MYR2,000 - MYR2,500 Per Month
- Assist in identifying and handling quality issues.
- Support continuous improvement activities related to product quality.
- Perform other quality-related duties assigned by the supervisor. ...
Posted
a month ago
Undisclosed
Fresh Graduates
- Assist engineers in troubleshooting and resolving assembly-related issues.
- Maintain tools, equipment, and workstations in proper working condition.
- Support continuous improvement initiatives for production and assembly processes.
Posted
10 days ago
MYR2,800 - MYR3,500 Per Month
Fresh Graduates
- * Achieve daily target output set by Supervisor.
- * To assist on the continual process improvement.
- * Work under the guidance of Supervisor to perform and complete the assigned duties in timely manner. ...
Be an early applicant!
Posted
a day ago
MYR1,800 - MYR2,200 Per Month
- Prepare the additives used for production as per .
- Make sure the weight of individual additive is correct before preparation and label the plastic bag accordingly.
- Update the additive stock card after preparation of additive. ...
Posted
2 months ago
Undisclosed
Be an early applicant!
Posted
5 days ago
MYR1,800 - MYR2,200 Per Month
- Prepare the additives used for production as per .
- Make sure the weight of individual additive is correct before preparation and label the plastic bag accordingly.
- Update the additive stock card after preparation of additive. ...
Posted
2 months ago
MYR3,500 - MYR5,000 Per Month
- Load and unload materials and finished products from CNC machines, ensuring safe handling practices.
- Assist in the setup and calibration of CNC machines, including tooling and fixture installation.
- Read and interpret technical drawings, blueprints, and work instructions to guide production processes. ...
Posted
11 days ago
MYR1,800 - MYR2,500 Per Month
- Conduct quality control checks throughout the production process, identifying and rectifying any defects or deviations from quality standards to ensure product excellence.
- Adhere strictly to all safety procedures and protocols, including the proper use of personal protective equipment (PPE) and safe operation of machinery, to maintain a safe working environment.
- Assemble wood components into finished products, utilizing various joining techniques and fasteners, ensuring structural integrity and aesthetic appeal. ...
Posted
2 days ago
MYR1,950 - MYR2,150 Per Month
Fresh Graduates
- Melaporkan sebarang kerosakan mesin, kecacatan produk atau masalah proses kepada juruteknik atau penyelia
- Mematuhi peraturan keselamatan, disiplin kerja dan prosedur bilik bersih (cleanroom).
- Menjaga kebersihan kawasan kerja serta mengamalkan budaya kerja yang selamat. ...
Posted
16 days ago
Undisclosed
- Monitor and support on external & internal calibration activities arrangement, calibration certificate verification & calibration sticker(s) updating.
- Verification on the issue feedback by inspector or technician. Communication with production for improvement.
- Communicate with the internal customer to investigate & solve issues. ...
Be an early applicant!
Posted
5 days ago
MYR1,750 - MYR2,000 Per Month
+Additional Compensation
Fresh Graduates
- Melaporkan sebarang kerosakan mesin, kecacatan produk atau masalah proses kepada juruteknik atau penyelia
- Mematuhi peraturan keselamatan, disiplin kerja dan prosedur bilik bersih (cleanroom).
- Menjaga kebersihan kawasan kerja serta mengamalkan budaya kerja yang selamat. ...
Posted
23 days ago
MYR3,500 - MYR5,000 Per Month
- Precision Tool Grinding: Grind high-precision punch, reamers and custom micro-tools from solid carbide or HSS blanks.
- Wheel Profile Dressing: Select, mount, and dress diamond and CBN wheel packs. Measure and input wheel qualification data into the CNC controller.
- In-Process Quality Control: Perform first-article and in-process inspections using ultra-precision metrology equipment (e.g. profile projectors, laser micrometers) to guarantee tolerances down to the micron level. ...
Posted
11 days ago
Undisclosed
Be an early applicant!
Posted
5 days ago
Job searches related to “Quality Control”