900+ Qc Inspector Jobs - October 2026 - High Salaries

Quality Control Inspection

Seri Kembangan, Selangor

Near Train Station

Identify and report defective products, quality issues, or abnormalities to the QC Supervisor.
Assist in monitoring production processes to ensure products meet required quality standards.
Support sampling, measuring, testing, and inspection activities when required. ...

Posted

a month ago

Testing and Inspection Technician Testing and Inspection Technician

Singda Superalloy (M) Sdn Bhd

MYR3,000 - MYR5,000 Per Month

Ultrasonic Testing (UT) Non-Destructive Testing (NDT)

Pasir Gudang, Johor

· Prepare and operate NDT equipment and ensure the equipment is properly calibrated and in good working condition.
· Ensure all inspection results comply with the applicable acceptance criteria and quality requirements.
· Maintain proper identification and traceability of inspected materials and components. ...

Posted

a month ago

Quality Control Supervisor Quality Control Supervisor

United Hydraulic Sdn Bhd

MYR4,500 - MYR5,000 Per Month

ISO 9001 Quality Management System IATF 16949

Kapar, Selangor

Monitor quality performance and conduct quality assessments.
Assist in evaluating supplier quality systems and drive continuous supplier improvement.
Analyze quality data to identify trends, recurring issues, and areas for improvement. ...

Posted

a month ago

Quality Assurance Executive Quality Assurance Executive

Irkaz Holdings Sdn Bhd

Up to MYR2,600 Per Month

Quality Control Quality Assurance

Kluang, Johor

Prepare site reports, progress updates, inspection requests, and related documentation.
Monitor material usage and site manpower.
Ensure compliance with site safety requirements and quality standards. ...

Posted

2 months ago

Quality Inspector (CMM) Quality Inspector (CMM)

Tonasco Malaysia Sdn Bhd

Undisclosed

Coordinate Measuring Machine (CMM) Operation Quality Control (QC)

Shah Alam, Selangor

Near Train Station

· Provide feedback to CMM Programmers on measurement or program-related issues.
· Guide and monitor junior staff to ensure inspection accuracy and compliance with procedures.
· Conduct 5S activities and perform routine machine maintenance. ...

Posted

2 months ago

Quality Assurance Technician (CMM) Quality Assurance Technician (CMM)

Tonasco Malaysia Sdn Bhd

Undisclosed

Coordinate Measuring Machine (CMM) Operation Quality Control (QC)

Shah Alam, Selangor

Near Train Station

· Provide feedback to CMM Programmers on measurement or program-related issues.
· Guide and monitor junior staff to ensure inspection accuracy and compliance with procedures.
· Conduct 5S activities and perform routine machine maintenance. ...

Posted

2 months ago

Production Quality Inspector Production Quality Inspector

Agensi Pekerjaan Times Management Consultancy Sdn. Bhd.

MYR1,800 - MYR2,000 Per Month

Quality Assurance Quality Control

Subang Jaya, Selangor

Near Train Station

Identify, report, and follow up on quality issues.
Adhere to company quality procedures and safety regulations.What We Offer
Competitive basic salary ...

Posted

2 months ago

Junior Quality Inspector Junior Quality Inspector

Agensi Pekerjaan Times Management Consultancy Sdn. Bhd.

MYR1,800 - MYR2,000 Per Month

Quality Assurance Quality Control

Subang Jaya, Selangor

Near Train Station

Identify, report, and follow up on quality issues.
Adhere to company quality procedures and safety regulations.What We Offer
Competitive basic salary ...

Posted

2 months ago

Dimensional Inspector Dimensional Inspector

Agensi Pekerjaan Job Search Asia Sdn. Bhd.

MYR2,500 - MYR4,500 Per Month

Packaging Failure Analyst Packaging Failure Analyst

Port Klang, Selangor

Equipment Calibration & Care: Ensure proper maintenance, calibration, and routine checks of all CMM machines and precision measuring tools in the QA lab.
Internal Root Cause Analysis: Assist internal teams in identifying defect causes (5-Why / Fishbone) and establishing internal corrective actions to prevent recurring production defects.
CMM Programming & Metrology: Write, test, and optimize offline/online CMM programs from CAD models or 2D / 3D engineering drawings to verify part dimensions and characteristics accurately. ...

CMM Specialist

Posted

2 months ago

NCS Global Technology Sdn Bhd

MYR3,000 - MYR3,600 Per Month

Bayan Lepas, Pulau Pinang

Assess material properties and mechanical characteristics of components for defect analysis.
Use analytical tools such as
Parametric Analyzer (I/V analysis), Keithley Meter, TDR, EOTPR ...

Communication

Posted

2 months ago

Manufacturing Quality Inspector Manufacturing Quality Inspector

Agensi Pekerjaan Times Management Consultancy Sdn. Bhd.

MYR1,800 - MYR2,000 Per Month

Quality Assurance Quality Control

Subang Jaya, Selangor

Near Train Station

Identify, report, and follow up on quality issues.
Adhere to company quality procedures and safety regulations.What We Offer
Competitive basic salary ...

Posted

2 months ago

Works Supervisor Works Supervisor

MEP Enviro Technology Sdn Bhd

MYR3,000 - MYR4,000 Per Month

Bukit Mertajam, Pulau Pinang

Fresh Graduates

Responsible, able to work independently, and good communication skills
Minimum SPM / Diploma or equivalent
Experience in site supervision or waste management is an advantage ...

Site Supervision Waste Management

Posted

2 months ago

Bio-Nutricia

Sungai Buloh

Perform sampling and coordinate required physical, chemical and microbiological testing.
Record inspection and testing results accurately and maintain proper traceability.
Identify and report any defective, damaged or non-conforming materials. ...

Posted

21 days ago

WR Manufacturing Sdn Bhd

Malaysia

Carry out sampling, measurements, visual inspections, and basic quality tests according to established QC procedures.
Identify, record, and report any defects, abnormalities, or non-conformities found during incoming, in-line, and outgoing inspections.
Ensure rejected or non-conforming materials and products are properly identified, segregated, and controlled. ...

Posted

21 days ago

Hillmec Integrated Sdn Bhd

Subang Jaya

Defect Containment: Identify, document, and segregate non-conforming or defective materials. Issue non-conformance reports (NCRs) and immediately communicate quality issues to production supervisors.
Process Compliance: Ensure all manufacturing processes adhere to internal standard operating procedures (SOPs) and industry regulatory standards (e.g., ISO 9001).
Continuous Improvement: Assist the engineering team in root-cause analysis for recurring defects and suggest improvements to minimize waste and rework. ...

Posted

21 days ago

WELLMATE SDN BHD

Gerbang Nusajaya

Recommend improvements to the production process to ensure quality control.
Document inspection outcomes by completing detailed reports and performance records.
Teach the production team about quality control concerns to improve product excellence. ...

Posted

21 days ago

EVO PRECISION ENGINEERING PTE. LTD.

Singapore

Upkeep inspection record and samples
Conduct inspection on first articles and record data in the inspection forms
Other duties as assigned ...

Posted

20 days ago

Golden Fresh

Butterworth

Requirement:
Have 2-3 years of experience in QC2. Able to red and written in English.
Job Type: Full-time ...

Posted

19 days ago

LEADER ENGINEERING PTE. LTD.

Singapore

Implement surveillance activities relating to quality for external and internal machining activities
Receive materials and reviews supplier documentation to determine dimension specifications, measurements, and tests required to ensure quality and customer satisfaction.
Performs SAP transactions after completion of QC operations. ...

Posted

18 days ago

ZEN CAREER PTE. LTD.

Singapore

5 Day Work
Perform daily quality checks on calibration instruments and inspect incoming, in-process, and finished products based on client specifications and technical drawings.
Conduct client-specific inspections and accurately record results using ERP and digital inspection systems. ...

Posted

18 days ago

LEADER ENGINEERING PTE. LTD.

Singapore

Posted

18 days ago

Aegis Materials (M) Sdn Bhd

Seremban

Identify and report defects and non-conforming materials/products.
Collect samples for laboratory testing and follow up on quality issues.
Monitor production processes to ensure compliance with SOPs and quality requirements. ...

Posted

18 days ago

EPG Engineering System Sdn Bhd

Senai

Sampling and inspection of finished products, issuing inspection report
Proper labelling of unqualified finished products and notify Quality Engineer for confirmation
Inspection during the production process, identify non-conformance and ensure non-conformance is handled according to the procedure ...

Posted

18 days ago

Zen Career

Singapore

Posted

18 days ago

STARKEN AAC SDN BHD

Kulai

Surface finishing and appearance
Cracks, honeycombing, chips and other visible defects
Alignment and shape ...

Posted

17 days ago

MyCareersFuture

Tuas

Posted

17 days ago

TEX-STAR ENGINEERING SINGAPORE PTE LTD

Singapore

Measure products with rulers, calipers, gauges, or micrometers
Accept or reject finished items
Remove all products and materials that fail to meet specifications ...

Posted

17 days ago

TEX-STAR ENGINEERING PTE LTD

Singapore

• Measure products with rulers, calipers, gauges, or micrometers
• Accept or reject finished items
• Remove all products and materials that fail to meet specifications ...

Posted

17 days ago

Tiger Technology (M) Sdn Bhd

Senawang

Recording inspection results by completing reports, summarizing re-works and inputting data into quality folder
Guide the production team on quality control measures to improve product excellence
Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements ...

Posted

17 days ago

Rapid Taste Food Industries Sdn. Bhd.