100+ Qa Engineering Jobs in Johor - June 2026 - High Salaries
Showing 135 jobs results for
"qa engineering"
in Johor
Never miss any updates for Qa Engineering jobs
Activate Job Alert
Job "qa engineering"
in "Johor"
Manage Alert
Undisclosed
- Are okay to work at area near PTP JB?
- Bachelor's (Required)
- QA/QC Precast Concrete: 2 years (Required) ...
Posted
12 days ago
MYR3,000 - MYR6,000 Per Month
- Main duties
- QC Planning & Coordination
- · To oversee the inspection and verification roles and quality related issues to ensure contract works comply with drawings. ...
Posted
a day ago
Undisclosed
- Enable to drive and support project team to ensure timely implementation of First Article project prior to mass production run.
- Review DFM, PFMEA, process capability study, stack up tolerance study for product design and requirement.
- Generate Control Plans (CP) and conduct Failure Mode Effect Analysis (FMEA) ...
Posted
3 days ago
MYR2,500 - MYR3,000 Per Month
Gerbang Nusajaya
- Enable to drive and support project team to ensure timely implementation of First Article project prior to mass production run.
- Review DFM, PFMEA, process capability study, stack up tolerance study for product design and requirement.
- Generate Control Plans (CP) and conduct Failure Mode Effect Analysis (FMEA) ...
Posted
19 days ago
MYR2,800 - MYR3,500 Per Month
Malaysia
- Non-Conformance (NCR): Identify site defects, issue NCRs, and monitor corrective actions until resolved.
- Records: Manage Quality Records, including RFIs (Request for Inspection) and daily quality logs.
- Liaison: Coordinate with consultants and clients for joint inspections and final approvals. ...
Posted
12 days ago
MYR6,000 - MYR7,000 Per Month
Gerbang Nusajaya
- Review of QA/QC involvement in the Method Statement and Job Safety Analysis (JSA).
- Participate in any meeting that requires QA/QC input.
- Responsible in verifying the quality of materials upon receive and check calibration of laboratory testing equipment. ...
Posted
12 days ago
MYR6,000 - MYR7,000 Per Month
Gerbang Nusajaya
- Review of QA/QC involvement in the Method Statement and Job Safety Analysis (JSA).
- Participate in any meeting that requires QA/QC input.
- Responsible in verifying the quality of materials upon receive and check calibration of laboratory testing equipment. ...
Posted
12 days ago
MYR2,800 - MYR3,500 Per Month
Malaysia
- Non-Conformance (NCR): Identify site defects, issue NCRs, and monitor corrective actions until resolved.
- Records: Manage Quality Records, including RFIs (Request for Inspection) and daily quality logs.
- Liaison: Coordinate with consultants and clients for joint inspections and final approvals. ...
Posted
13 days ago
OTT CREATION MARKETING
MYR4,500 - MYR4,500 Per Month
- Conduct root cause analysis and implement corrective and preventive actions (CAPA) for quality issues
- Ensure compliance with client specifications, regulatory requirements, and quality standards
- Oversee QA/QC documentation including NCRs, ITPs, Observation Reports, and material approvals ...
Posted
13 days ago
MYR2,900 - MYR3,200 Per Month
- Assist in investigation of initial test abnormalities or process-related issues
- Record, compile and maintain accurate laboratory data and reports
- Work independently with minimal supervision while maintaining good communication with the team ...
Posted
a month ago
MYR2,900 - MYR3,200 Per Month
- Assist in investigation of initial test abnormalities or process-related issues
- Record, compile and maintain accurate laboratory data and reports
- Work independently with minimal supervision while maintaining good communication with the team ...
Posted
a month ago
Undisclosed
Malaysia
- Establish and ensure controls execution
- Drive change management compliance, Nonconformity lot decision and risk assessment (FMEA) and ensure process compliance from a manufacturing perspective .
- Improve and configure process control systems - Setting/develop the systems to control tools/equipment key parameters Statistical Process Control (SPC). Establish and ensure controls execution. ...
Posted
22 days ago
QA Engineer (Metal Product Fabrication - Assembly) QA Engineer (Metal Product Fabrication - Assembly)
A.P. Emco Executives Sdn Bhd
MYR3,500 - MYR4,000 Per Month
- Set quality requirements for raw materials and monitor supplier compliance.
- Oversee all stages of production to ensure adherence to quality standards and work instructions (WI).
- Approve finished products or reject defective items based on inspection results. ...
Posted
12 days ago
QA Engineer (Metal Product Fabrication - Assembly) QA Engineer (Metal Product Fabrication - Assembly)
A.P. EMCO Executives Sdn Bhd
MYR3,500 - MYR4,000 Per Month
- Set quality requirements for raw materials and monitor supplier compliance.
- Oversee all stages of production to ensure adherence to quality standards and work instructions (WI).
- Approve finished products or reject defective items based on inspection results. ...
Posted
12 days ago
Up to 7,428.70 Per Month
Malaysia
- · To implement QAQC procedure and ensure the PQP is in line with the project quality standard.
- · To supervise and guide QC supervisors and Inspectors on their daily task.
- · To ensure all employees, including sub-contractors and suppliers are complied with company’s QAQC procedures. ...
Posted
23 days ago
MYR8,000 - MYR10,000 Per Month
- To Achieve Zero defect on incoming Raw Material.
- Committed to have adequate protect on company Document and is available and suitable for use when it is needed.
- Committed to Zero Finding on Customer Quality Audit ...
Posted
17 days ago
FIT PIONEER RESOURCES SDN BHD
MYR5,000 - MYR8,000 Per Month
Malaysia
- Coordinate and assist clients, main contractors, and consultants during QC inspections to resolve factory and site quality issues.
- Support project teams in maintaining and controlling the project quality management system.
- Work closely with factory and site engineers on quality matters, and provide technical support when required. ...
Posted
12 days ago
MYR2,000 - MYR2,500 Per Month
- Prepare inspection reports and maintain quality documentation
- Support supplier quality activities and review supplier inspection reports
- Assist in handling quality complaints, failure analysis, and RTV arrangements ...
Posted
13 days ago
QA Engineer (FAI) - Metal Stamping (Gelang Patah, Johor) QA Engineer (FAI) - Metal Stamping (Gelang Patah, Johor)
Allied Precision Manufacturing
MYR2,500 - MYR3,600 Per Month
- Professional development
- Job Responsibilities :
- Work closely with Manufacturing to develop product QA plans during NPI phase. ...
Posted
2 days ago
Undisclosed
- Support in developing/transferring analytical methods and ensure the accuracy and precision of analyses
- Support LIMS masterdata update and improvement projects (site & global)
- Support periodic review activities for equipment/system/methods ...
Posted
11 hours ago
MYR3,000 - MYR5,000 Per Month
- Strong work ethic and self-motivated to complete task
- Have problem solving skills
- Ability to manage multiple priorities ...
Posted
a month ago
MYR2,200 - MYR2,500 Per Month
- Professional development
- Job Responsibilities :
- Work closely with Manufacturing to develop product QA plans during NPI phase. ...
Posted
2 days ago
Allied Precision Manufacturing (M) Sdn Bhd
MYR2,300 - MYR3,000 Per Month
Gerbang Nusajaya
- Enable to drive and support project team to ensure timely implementation of First Article project prior to mass production run.
- Review DFM, PFMEA, process capability study, stack up tolerance study for product design and requirement.
- Generate Control Plans (CP) and conduct Failure Mode Effect Analysis (FMEA) ...
Posted
a day ago
MYR10,000 - MYR20,000 Per Month
- Customer Complaints & CAPA: Champion customer defect investigations utilizing 8D methodology, 5Why analysis, Fishbone, FMEA, SPC, and MSA. Author and execute Corrective and Preventive Action (CAPA) plans.
- Continuous Process Improvement: Partner with Production and Supplier Quality Engineering teams to optimize manufacturing processes, drive down scrap rates, and elevate supplier component standards.
- Bachelor’s Degree in Mechanical Engineering, Manufacturing Engineering, Automation, or a related engineering field. ...
Posted
2 days ago
Undisclosed
- Provide hands-on support in complex troubleshooting, system-level debugging, and tester architecture.
- Oversee the design, development, and deployment of functional test systems (FCT), ICT, and MDA.
- Define test strategy, coverage, and ensure compliance with customer specifications and manufacturing requirements. ...
Posted
10 days ago
MYR2,500 - MYR3,500 Per Month
- Investigate non-conformance issues and implement corrective actions.
- Coordinate internal and external audits.
- Liaise with clients, suppliers, and relevant departments on quality matters. ...
Posted
5 days ago
Undisclosed
Malaysia
- Parental leave
- Professional development
- Kluang (Required) ...
Posted
a day ago
Undisclosed
- Prepare validation/ qualification protocols and report.
- Assist in investigation and follow up production issues and deviations.
- Responsible to draft, review and revise SOP and procedure for QA department and provide training. ...
Posted
8 days ago
Browse Location:
More Location
Browse Company:
More Companies
Browse "qa engineering" Job By:
Browse "qa engineering" Job By: