Jobs
Companies
Forums
300+ Process Engineering Jobs in Pulau Pinang - July 2026 - High Salaries
Showing 318 jobs results for
"process engineering"
in Pulau Pinang
Never miss any updates for Process Engineering jobs in Pulau Pinang
Manage Alert
Undisclosed
- Coordinate New Product Introduction (NPI) runs in the post-sputter process area.
- Document processes, procedures, and best practices.
- Use tools such as Minitab and Spotfire to support data-driven decision-making. ...
Posted
5 days ago
Undisclosed
- Lead cross functional team to perform sourcing and qualification of mechanical part when needed.
- Responsible for production process flow setup for any newly added process or new product launch and translate processes into work instruction in clear and precise manner.
- Responsible to manage ERP data such as BOM setup, Item setup and product routing. ...
Posted
7 days ago
OSRAM Opto Semiconductors (Malaysia) Sdn. Bhd., Penang
Undisclosed
- To support internal audit & customer audit, and response on audit findings.
- Lead and support productivity improvement and capacity extension.
- To work closely with Product Development, PI, PO and BT for new product/process setup and proper process handshake/pass over. ...
Posted
7 days ago
Undisclosed
- Compile and upload data to Online SPC timely to meet expected Test TAT
- Continuously update all test request and other necessary tracking
- Receive from previous shift and pass down information to next shift clearly ...
Posted
2 days ago
Undisclosed
- Compile and upload data to Online SPC timely to meet expected Test TAT
- Continuously update all test request and other necessary tracking
- Receive from previous shift and pass down information to next shift clearly ...
Posted
2 days ago
Undisclosed
- Compile and upload data to Online SPC timely to meet expected Test TAT
- Continuously update all test request and other necessary tracking
- Receive from previous shift and pass down information to next shift clearly ...
Posted
2 days ago
Undisclosed
Malaysia
- Maintain IE database and lead on the IE related system project.
- Time study and time standards: Perform time study data collection and analysis, continuous improvement based on Lean concept.
- Define production layout to ensure high efficiency and ergonomic for Lean operation. ...
Posted
8 days ago
Undisclosed
- Successfully executes responsibilities independently in accordance with good manufacturing practices and Plexus' Manufacturing Processes AND provide support to direct production line operators as it applies to their role.
- Comprehensive Understanding of Equipment / Process control / Safety / Risk Awareness / setup awareness / operation of, as it applies to their role.
- Associate’s Degree with 2 or more years of related experience is preferred. An equivalent combination of education and/or experience will be considered. ...
Posted
6 days ago
Undisclosed
Malaysia
- Support and mentor junior technicians in equipment maintenance, troubleshooting, and improvement activities.
- Ensure equipment uptime targets are achieved by responding effectively to major machine breakdowns and coordinating recovery actions.
- Execute and oversee preventive maintenance programs, equipment upgrades, and continuous improvement initiatives to enhance reliability and productivity. ...
Posted
6 days ago
MYR2,000 - MYR4,000 Per Month
- Perform component-level troubleshooting on defective PCBAs and functional test failures generated from the production floor.
- Interpret electrical schematics, circuit diagrams, layout files, and engineering documents to isolate root causes of circuit abnormalities or component failures.
- Utilize diagnostic instruments such as digital oscilloscopes, multimeters, DC power supplies, logic analyzers, and specialized test software to trace signals and verify board behavior. ...
Posted
6 days ago
Undisclosed
- To lead Sputter Process Improvement Projects (SU/STT/Cost/Quality/PPH & others), which include new products/machines/process qualification.
- To lead, supervise and coach/train process tech, include engineering specialist and characterize technicians.
- Responsible for sputter process related issues trouble shooting (common causes), work closely with Shift process team in sputter process sustaining, trouble shooting & improvement in order to achieve sputter utilization (down time) & quality goal. ...
Posted
9 days ago
Undisclosed
- Monitor key process output variables (KPOV) during production to ensure process stability and product quality.
- Perform process adjustments as needed to maintain specifications and resolve deviations.
- Assist in troubleshooting process and equipment issues to minimize downtime. ...
Posted
9 days ago
Undisclosed
- Monitor key process output variables (KPOV) during production to ensure process stability and product quality.
- Perform process adjustments as needed to maintain specifications and resolve deviations.
- Assist in troubleshooting process and equipment issues to minimize downtime. ...
Posted
9 days ago
Undisclosed
- Support continuous quality improvement initiatives especially analysis on customer returns.
- Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
- Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs ...
Posted
9 days ago
Undisclosed
- Support continuous quality improvement initiatives especially analysis on customer returns.
- Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
- Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs ...
Posted
9 days ago
Undisclosed
Malaysia
- Alert the managers when standards are not met.
- Represent the industrial organisation of the project in internal or external (customers, suppliers) meetings.
- Define with the project team the process, in order to meet performance and cost targets. ...
Posted
12 days ago
MYR4,000 - MYR5,500 Per Month
Prai
- Lead molding technicians and operators to produce parts free of quality defects.
- Handleall quality issues in molding before submitting for QA buy-off.
- Evaluate processes and resolve daily process issues. ...
Posted
13 days ago
Undisclosed
- Analyze complex production data sets to identify systemic inefficiencies, yield loss drivers, and cost reduction opportunities.
- Lead continuous improvement projects using Lean Manufacturing, Six Sigma, and Kaizen methodologies; drive projects from concept to validated results.
- Design and optimize factory layouts, material flow, and workstation ergonomics to support current and future production requirements. ...
Posted
13 days ago
Undisclosed
- You will participate in projects that require you to investigate, develop, document and implement new product and process technologies of moderate complexity and scope.
- While often you may be responding to situations presented to you by others, you will also be able to demonstrate proactive insight into technical challenges and mitigates potential issues or incorporates improvements.
- You will plan, schedule and execute the engineering work in a part of a major project; or you may lead a smaller scope project. ...
Posted
13 days ago
Undisclosed
- Engineering Evaluation - Support engineering improvement activities including dummy evaluation and sample particle collection.
- Disk Mapping & Patch Review - Review disk mapping results within dedicated window to meet quality and process control timelines.
- Buyoff & Triggered Activities - Conduct buyoff evaluations during troubleshooting activities upon engineering triggers. Perform required measurements and assist in verifying target conditions as part of yield qualification. ...
Posted
12 days ago
Undisclosed
- Analyze complex production data sets to identify systemic inefficiencies, yield loss drivers, and cost reduction opportunities.
- Lead continuous improvement projects using Lean Manufacturing, Six Sigma, and Kaizen methodologies; drive projects from concept to validated results.
- Design and optimize factory layouts, material flow, and workstation ergonomics to support current and future production requirements. ...
Posted
13 days ago
Undisclosed
- Engineering Evaluation - Support engineering improvement activities including dummy evaluation and sample particle collection.
- Disk Mapping & Patch Review - Review disk mapping results within dedicated window to meet quality and process control timelines.
- Buyoff & Triggered Activities - Conduct buyoff evaluations during troubleshooting activities upon engineering triggers. Perform required measurements and assist in verifying target conditions as part of yield qualification. ...
Posted
12 days ago
Undisclosed
- Engineering Evaluation - Support engineering improvement activities including dummy evaluation and sample particle collection.
- Disk Mapping & Patch Review - Review disk mapping results within dedicated window to meet quality and process control timelines.
- Buyoff & Triggered Activities - Conduct buyoff evaluations during troubleshooting activities upon engineering triggers. Perform required measurements and assist in verifying target conditions as part of yield qualification. ...
Posted
12 days ago
MYR1,800 - MYR2,300 Per Month
- Strong learning agility with the ability to quickly acquire new technical knowledge, adapt to evolving technologies, and deep dive into complex technical challenges.
- Highly observant, proactive, and aggressive in identifying abnormalities, failure signatures, and process excursions to ensure timely issue detection and resolution.
- Self-motivated with a strong work ethic, willingness to learn, and commitment to delivering high-quality results in a fast-paced manufacturing environment. ...
Posted
13 days ago
Undisclosed
- WD is building the infrastructure behind the AI-driven data economy.
- As AI scales, so does data. Every interaction, every model, every system generates data that must be stored, managed, and made accessible over time. That’s where we come in.
- We combine deep engineering expertise with global-scale manufacturing to deliver the storage systems that make AI possible, powering hyperscale data centers, cloud platforms, and enterprise infrastructure worldwide. ...
Posted
14 days ago
Production Engineer- Sr. engineer - Oil refinery-process Production Engineer- Sr. engineer - Oil refinery-process
Soon Soon Oilmills Sdn Bhd
MYR3,500 - MYR4,000 Per Month
Prai
- Manage production activities and safety practice ensuring that the operation are in compliance to local authority regulations and requirements (E.g. DOE, DOSH, OSHA, MBSP and etc..)
- Work closely with Product Development and conduct research/ pilot run for process& product improvement, process validation and quality justification.
- To perform task assigned from superior from time to time in align with company's goal and objective. ...
Posted
15 days ago
MYR2,500 - MYR5,500 Per Month
Prai
- Handle all quality issues in molding before submitting for QA buy-off.
- Evaluate processes and resolve daily process issues.
- Ensure all operations are carried out according to SOP and OI. ...
Posted
15 days ago
Undisclosed
- Successfully executes responsibilities independently in accordance with good manufacturing practices and Plexus' Manufacturing Processes AND provide support to direct production line operators as it applies to their role.
- Comprehensive Understanding of Equipment / Process control / Safety / Risk Awareness / setup awareness / operation of, as it applies to their role.
- Associate’s Degree with 2 or more years of related experience is preferred. An equivalent combination of education and/or experience will be considered. ...
Posted
15 days ago
Browse Location:
More Location
Browse Company:
More Companies
Browse "process engineering" Job By:
Browse "process engineering" Job By: