300+ Process Engineering Jobs in Pulau Pinang - September 2026 - High Salaries
Showing 300 jobs results for
"process engineering"
in Pulau Pinang
Undisclosed
Be an early applicant!
Posted
6 days ago
Undisclosed
- To ensure the production processes are well controlled on process times, cycle time and material usage.
- To lead production machinists and coordinate failure quality issue for root cause analysis, correction and preventive actions.
- To ensure the production safety and 5S is documentation (WI) implemented and reviewed from time to time for the machinist to follow. ...
Be an early applicant!
Posted
6 days ago
Undisclosed
- Process documents improvement.
- Prepare process equipment for mass production & technical support to Production for process improvement.
- Buy-off documentation including customer information and internal document before mass production. ...
Posted
22 days ago
MYR3,800 - MYR5,000 Per Month
- Establish priority list on gaps/opportunities with effective closure plan.
- Drive effective work method and solution through automation and poka yoke solution.
- Provide OPL (One Point Lesson) and certification test to ensure all floor personnel are adequately trained and qualified. ...
Posted
2 months ago
Senior Process Engineer
MYR8,000 - MYR10,500 Per Month
+Additional Compensation
- Introduction of new products and build new processes (BOM).
- Properly prepare technical documents, improve and standardize the process flow, and implement it after approval.
- Provide timely guidance, processing, coordination and resolution of technical problems arising from products. ...
Posted
6 days ago
Undisclosed
- Support continuous improvement activities to enhance productivity, quality, and safety.
- Report any machine breakdowns, test failures, or safety issues to the Production Leader/Supervisor.
- To performed assigned task from superior based from standard / Manufacturing Process Instruction and complying with ISO 9001 and IATF 16949 standard ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Maintain and update specifications to ensure compliance of operations.
- Source, evaluate, characterize, procure and implement material changes for quality, yield and cost improvement.
- Conduct engineering evaluation and characterization via usage of DOE/FMEA methods. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Support engineering build requests, ramp ups and platform extensions.
- Monitor and improving the yield of DA/GA process, including cost reduction activities.
- Support on the TMM and TMS activities ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Monitoring on hold lot disposition and provide communication with engineer in order to not impact daily assembly output.
- Maintain all housekeeping / 5s engineering station and tooling’s, to ensure compliance to safety rules.
- Monitor all processes, resolve all products issues and coordinate with production and equipment to reduce downtime and getting better product quality. ...
Posted
a month ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Interfaces with personnel on production, QA and other support groups regarding product/process related problems and disposition.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Posted
a month ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Interfaces with personnel on production, QA and other support groups regarding product/process related problems and disposition.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Posted
a month ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Interfaces with personnel on production, QA and other support groups regarding product/process related problems and disposition.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Posted
a month ago
Undisclosed
- Apply core engineering principles to streamline manufacturing workflows and eliminate bottlenecks.
- Evaluate production variables and operational constraints to identify areas for improvement.
- Develop, present, and implement engineering solutions to optimize manufacturing processes. ...
Posted
a month ago
MYR4,000 - MYR4,999 Per Month
- Ensure applying necessary actions/ activities on all concern and issues related to Product and Process Quality.
- Interacts with Engineers/ Supervisors and Technicians regarding concern and proposals on equipments and/ or processes to improve safety, desired productivity and overall quality.
- Make sure that data is used accordingly to estimate the effectiveness of improvements and continuous imrovement project. Recommends amd initiates projects with respect to deadline, with measurable improvements. ...
Posted
a month ago
Undisclosed
- Process documents improvement.
- Prepare process equipment for mass production & technical support to Production for process improvement.
- Buy-off documentation including customer information and internal document before mass production. ...
Posted
2 months ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform electrical validationincludingunpowered IV curve and Time-Domain Reflectometry (TDR) to identify failing areas.
- Utilize CSAM, X-ray imaging, and material analysis tools for defect detection.
- Carry out visual inspection using microscopes to identify defects on product substrates. ...
Be an early applicant!
Posted
22 days ago
MYR3,200 - MYR3,800 Per Month
- Handle general production issues and worker-related matters on the production floor.
- Assist with mould installation, mould removal and mould changeover.
- Assist with new product and new mould trials. ...
Posted
17 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. Assist in the development and implementation of supplier management programs. ...
Be an early applicant!
Posted
6 days ago
Undisclosed
- Brainstorming findings with other team members.
- Reporting any issues through the appropriate channels.
- Line Support- Downtime ...
Be an early applicant!
Posted
18 days ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Review bonding diagrams, strip drawings, process requirements, customers specifications and standard.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Be an early applicant!
Posted
18 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. ...
Be an early applicant!
Posted
12 days ago
Undisclosed
- Daily job arrangement, resources allocation, utilization and capacity planning.
- Coverage area include in-process and out-going inspection (Follow site).
- Work with QA engineer to define the inspection flows and inspection instruction. ...
Be an early applicant!
Posted
12 days ago
MYR3,500 - MYR4,500 Per Month
- Support NPI project execution and ensure timely delivery of samples and documentation.
- Monitor cost variance and recommend cost improvement actions.
- Prepare detailed cost estimations for new RFQs, covering material, machining, tooling, and labor. ...
Be an early applicant!
Posted
a month ago
Bending Technician/ Operator
MYR1,700 - MYR3,000 Per Month
- To ensure the bending process produce best results as per customer requirement.
- To perform in-process quality inspection and measurement of finished products and compare them with requirements using proper inspection tools.
- To perform daily machinery inspection with checklist recorded & maintained to ensure machines functionality. ...
Be an early applicant!
Posted
11 days ago
MYR3,500 - MYR5,000 Per Month
- Precision Tool Grinding: Grind high-precision punch, reamers and custom micro-tools from solid carbide or HSS blanks.
- Wheel Profile Dressing: Select, mount, and dress diamond and CBN wheel packs. Measure and input wheel qualification data into the CNC controller.
- In-Process Quality Control: Perform first-article and in-process inspections using ultra-precision metrology equipment (e.g. profile projectors, laser micrometers) to guarantee tolerances down to the micron level. ...
Posted
12 days ago
MYR2,200 - MYR3,300 Per Month
Fresh Graduates
Bukit Minyak, Pulau Pinang
- Ensure proper storage, handling, and disposal of samples and chemical reagents.
- Maintain laboratory housekeeping.
- Collaborate effectively with chemists, operations, and environmental teams. ...
Posted
a month ago
Undisclosed
- Responsible for the equipment hard down and perform line machine trouble-shooting.
- Investigates causes of machine breakdowns and implement improvements to prevent recurrences.
- Track and update periodically machine performance MTBA, MTBF, MTTA, MTTR and OEE. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Interfaces with personnel on production, QA and other support groups regarding product/process related problems and disposition.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Work together with Manufacturing team to prioritize the urgent and revenue lots as well as other lots in pipeline.
- Communicate with Manufacturing team to plan on the line activities and conversions
- Maintain and monitor process parameters in order to control process stability. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Verify machine settings and ensure calibration is correct before starting operations.
- Adjust machine parameters as needed to maintain optimal performance.
- Process Control and Documentation: ...
Be an early applicant!
Posted
a month ago