2,700+ Manufacturing Engineer Jobs in Malaysia | Job Vacancies | June 2026 | Ricebowl
Showing 2,719 jobs results for
"manufacturing engineer"
Never miss any updates for Manufacturing Engineer jobs
Activate Job Alert
Job "manufacturing engineer"
Manage Alert
Undisclosed
- Drive technical continuity across product transfer and sustaining operations
- Technical Ownership & Product Stewardship: Serve as the primary technical owner for assigned product lines/modules supporting customer request. Own end-to-end manufacturing readiness in process capability, BOM accuracy and control, assembly and test robustness to ensure alignment across engineering, quality, and operations for sustained production performance
- Ramp Execution & High-mix Stabilization: Lead engineering readiness and execution for volume ramp in driving rapid resolution of yield, cycle time, and capacity constraints. Establish process controls to ensure repeatability and scalability/ Monitor key KPIs (yield, DPPM, cycle time, output) and take decisive corrective actions ...
Posted
a day ago
SGD3,400 - SGD3,400 Per Month
Singapore
- ESSENTIAL DUTIES AND RESPONSIBILITIES
- · Monitor and continuously improve daily quality/efficiency performance for assigned areas.
- · Design and procure production tooling, processing equipment and workstations. ...
Posted
a day ago
SGD2,500 - SGD2,500 Per Month
Singapore
- Working Hours: Monday to Friday (9am to 6pm)
- Salary Package: Basic + AWS + Variable Bonus
- Duration: Permanent ...
Posted
2 days ago
SGD2,500 - SGD2,500 Per Month
Singapore
- Working Hours: Monday to Friday (9am to 6pm)
- Salary Package: Basic + AWS + Variable Bonus
- Duration: Permanent ...
Posted
9 days ago
ROCKWELL AUTOMATION ASIA PACIFIC BUSINESS CENTER PTE. LTD.
SGD2,400 - SGD2,400 Per Month
Singapore
- • Provide recommendations, requirements, and justifications to support investigation and evaluation of new manufacturing technologies.
- • Assist with the implementation of IT security and business productivity initiatives in the manufacturing plants.
- • Provide design input and execution support for the development and deployment of Manufacturing Execution Systems (MES) and information management systems in the plants. ...
Posted
2 days ago
ROCKWELL AUTOMATION ASIA PACIFIC BUSINESS CENTER PTE. LTD.
SGD2,400 - SGD2,400 Per Month
Singapore
- • Assist with development of standardized work practices, documentation maintenance, and operator training for all test related processes.
- • Use appropriate Lean Six Sigma tools for test equipment qualification, test system problem solving, and identification and implementation of continuous improvement opportunities.
- • Understand documentation on all aspects of the test solution. ...
Posted
2 days ago
SGD1,500 - SGD5,000 Per Month
Singapore
- Proficient in Six Sigma DMAIC, Lean methodologies, DOE, SPC, FMEA, GR&R, and other quality tools.
- Six Sigma Green/Black Belt certification is an advantage.
- Strong communication and interpersonal skills. ...
Posted
2 days ago
SGD3,500 - SGD3,500 Per Month
Singapore
- Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
- Salary Package: Basic salary up to $4,500 + AWS + Performance Bonus
- Duration: Permanent Role ...
Posted
2 days ago
SGD4,000 - SGD4,000 Per Month
Singapore
- Working Hours: 5 days (Monday to Friday, 8.30AM – 6PM)
- Salary Package: Basic $4,000 – $5,000 + AWS + Variable Bonus
- Duration: Permanent ...
Posted
a day ago
SGD2,900 - SGD2,900 Per Month
Singapore
- Independently assemble, integrate, and test electromechanical and pneumatic systems in accordance with engineering specifications.
- Execute production testing and verification activities to ensure compliance with quality, performance, and reliability standards.
- Perform systematic troubleshooting, fault isolation, diagnostics, and repair of assembly and test failures. ...
Posted
a day ago
Undisclosed
- Lead troubleshooting and root cause analysis activities to minimize downtime, defects, and scrap.
- Review MRB (Material Review Board) parts and implement corrective actions to reduce quality issues and waste.
- Develop and improve manufacturing methods, work instructions, tooling, fixtures, and assembly procedures. ...
Posted
20 hours ago
Undisclosed
- Lead troubleshooting and root cause analysis activities to minimize downtime, defects, and scrap.
- Review MRB (Material Review Board) parts and implement corrective actions to reduce quality issues and waste.
- Develop and improve manufacturing methods, work instructions, tooling, fixtures, and assembly procedures. ...
Posted
11 hours ago
Undisclosed
- As the connection between R&D and the factory, to assist in product hardware and software validation work, engineering change confirmation；
- As a member of the project to participate in promoting the factory lean process, provide technical solutions;
- The formation of a strong and solid engineering team, if there is a business need to go to headquarters for training. ...
Posted
11 hours ago
SGD1,000 - SGD2,000 Per Month
Singapore
- • Apply Six Sigma/Lean Manufacturing methodologies for continuous process improvements
- • Planning and scheduling of ERP system
- Requirements: ...
Posted
3 days ago
SGD4,500 - SGD4,500 Per Month
Singapore
- In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
- Responsible for conducting pre-production pilot run and training for associates.
- Provide technical support to Production to achieve technical and quality requirements. ...
Posted
4 days ago
Undisclosed
Malaysia
- Safety improvement
- Support industrialization of new products
- Understand product / process specifications and customer requirements; ...
Posted
6 days ago
Undisclosed
Singapore
- Manufacturing Process Engineer, designing/defining the process specifications and implementing manufacturing systems for new products and technologies and improving existing manufacturing systems with good process capabilities; as part of an industrial team representing Batam factory Manufacturing Operations in I+D project team (based on either Singapore, Netherlands or USA) & Interfacing with I&D/Category for PDLM/NPI project activities.
- You are responsible for
- All technical aspects of industrialization activities, including designing for manufacturing, assembly and testability, defining process specifications for new technologies and processes, improving existing manufacturing systems, managing/monitoring the process capabilities of part manufacturing with secondary processes and/or product assembly for New Product Introduction (NPI) for home and personal care appliances or equivalent, with cycle time ranging from 2 sec to 12 sec with automated / semi-automated / manual assembly equipment. ...
Posted
6 days ago
SGD4,000 - SGD4,000 Per Month
Singapore
- Monitor and optimize critical process parameters to improve process capability and stability.
- Lead process characterization, margin studies, and statistical analysis using engineering and analytical tools.
- Support process troubleshooting, technical investigations, and corrective action implementation. ...
Posted
6 days ago
SGD4,000 - SGD4,000 Per Month
Singapore
- Working Hours: 5 days (Monday to Friday, 8.30AM – 6PM)
- Salary Package: Basic $4,000 – $5,000 + AWS + Variable Bonus
- Duration: Permanent ...
Posted
6 days ago
Undisclosed
Singapore
- Plays pro-active and creative role in project team and lead technical discussions throughout the project (Design for manufacturing, assembly (manual and automated), testing).
- Identify bottlenecks/risks and initiating preventive and corrective actions by working closely with relevant functions to keep the product design simple for manufacturing and manufacturing under control with high OEE and low FOR.
- Initiates and executes major productivity improvement projects linked to processes, tools and equipment ...
Posted
7 days ago
Undisclosed
Malaysia
- Works on problems of diverse scope where analysis of data requires evaluation of identifiable factors. Exercises judgment within generally defined practices and policies in selecting methods and techniques for obtaining solutions.
- Work from laser schematics and electrical diagram, written, and verbal descriptions, layouts or defined plans to perform testing, fault diagnosis and trouble-shooting functions.
- Lead all failure analysis events to determine root cause. Provide in-depth evaluation & analysis of situations and data. Develop and implement effective corrective actions. ...
Posted
8 days ago
SGD3,500 - SGD3,500 Per Month
Singapore
- Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
- Salary Package: Basic salary up to $4,500 + AWS + Performance Bonus
- Duration: Permanent Role ...
Posted
9 days ago
JABIL CIRCUIT (SINGAPORE) PTE. LTD.
SGD2,500 - SGD2,500 Per Month
Singapore
- Working Hours: Monday to Friday (9am to 6pm)
- Salary Package: Basic + AWS + Variable Bonus
- Duration: Permanent ...
Posted
15 days ago
SGD4,000 - SGD4,000 Per Month
Singapore
- Working Hours: 5 days (Monday to Friday, 8.30AM – 6PM)
- Salary Package: Basic $4,000 – $5,000 + AWS + Variable Bonus
- Duration: Permanent ...
Posted
10 days ago
SGD1,500 - SGD5,000 Per Month
Singapore
- Proficient in Six Sigma DMAIC, Lean methodologies, DOE, SPC, FMEA, GR&R, and other quality tools.
- Six Sigma Green/Black Belt certification is an advantage.
- Strong communication and interpersonal skills. ...
Posted
10 days ago
Browse Location:
More Location
Browse Company:
More Companies
Browse "manufacturing engineer" Job By:
Browse "manufacturing engineer" Job By:
More Industries