- Carry out maintenance of building facilities, including electrical, mechanical, plumbing, HVAC, and fire protection systems.
30+ days
31 Maintenance Engineer Jobs in Senai - November 2026 - High Salaries
Showing 31 jobs results for
"maintenance engineer"
in Senai
- Respond to any emergency breakdown calls
30+ days
- Budget & Cost Control: Develop and manage CAPEX, OPEX, and maintenance budgets while tracking expenditures and identifying cost-saving opportunities.
Today
- Set up and adjust machine controls, including speeds, feeds, and tool paths, to achieve desired results.
10 days
- Provide relevant technical support and services to all departments.
11 days
9 days
4 days
Maintenance Technician
- Respond promptly to machine breakdowns to minimize production downtime.
12 days
19 days
12 days
19 days
Maintenance Technician (Facilities)
- General Facilities Maintenance: Inspects and cleans facilities and grounds. May include outside and inside inspections, such as the parking lot or within the facility. Sweep and clean, according to a regular schedule. Maintain supplies in supply room. May perform limited preventative maintenance work. Collect waste and dispose of waste appropriately. Appropriately handle recyclable materials as part of the waste disposal program. Perform lawn upkeep services, such as mowing or weeding.
20 days
30+ days
Maintenance Technician (Chargeman PW2, PW4, A0,A1 -A4)
- Knowledge of pharmaceutical documentation work such as Deviation, CCR, Investigation report, preparing protocol, preparing PM Planner, Calibration Planner, Calibration master list, Prepare SOP, Prepare monitoring logbook, checklist for PPM, and other related document for the Facilities system.
23 days
Maintenance Technician (Chargeman PW2, PW4, A0,A1 -A4)
- Knowledge of pharmaceutical documentation work such as Deviation, CCR, Investigation report, preparing protocol, preparing PM Planner, Calibration Planner, Calibration master list, Prepare SOP, Prepare monitoring logbook, checklist for PPM, and other related document for the Facilities system.
23 days
Graduate Engineer Jr. (Test- Quality- Process- R-D- Maintenance)
- Able to work in a fast-paced manufacturing environment
24 days
12 days
Senior Engineering Specialist, Facilities
- Perform first-level troubleshooting, fault diagnosis, and corrective actions for facility and utility system issues.
16 days
24 days
Technician (Maintenance-Quality)
- Compliance with 7S requirement.
12 days
12 days
12 days
TECHNICIAN-MAINTENANCE - PROD
- Set-up assembly line tooling and fixture equipment required to produce sub-assembly parts.
12 days
13 days
A0 CHARGEMAN TECHNICIAN (ELECTRICAL - MECHANICAL)
- Responsible for checking, monitoring, and recording job orders from departments, as well as troubleshooting and performing periodic preventive maintenance and mechanical repair work.
11 days
Repair Service Technician (Electrical)
- Responsible for repairing defective PCB boards and complete products on the production floor.
11 days
Juruteknik (Elektrik - Penyamanan Udara)
- Membaca dan memahami Rajah Satu Garisan Elektrik (Electrical Single-Line Diagram – SLD) bagi menyokong kerja-kerja penyelenggaraan dan pengesanan kerosakan elektrik.
12 days
13 days
Engineering Specialist III, Equipment Maintenance
- Monitor equipment conditions, inspection results, preventive maintenance activities, recurring machine issues, and product yield and defect performance.
23 days
- Perform routine inspections and audits of manufacturing equipment to verify functionality, identify issues, and coordinate repair or replacement activities.
30+ days