200+ Engineering Jobs in Pulau Pinang - September 2026 - High Salaries
Showing 299 jobs results for
"engineering"
in Pulau Pinang
Marketing & Engineering
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Estimate machining processes, material requirements, tooling and other production costs.
- Prepare and submit quotation and costing to customers.
- Liaise with customers to clarify drawings, technical requirements and quotation details. ...
Posted
3 days ago
MYR2,000 - MYR2,500 Per Month
- Report machine breakdowns or abnormalities to the supervisor promptly
- Ensure compliance with safety procedures during machine operation and maintenance
- Support production team to achieve daily production targets ...
Be an early applicant!
Posted
3 days ago
Machinist (Cnc 3 Axis / Wire Cut)
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
- To understand specifications of the task at hand and the desired result by reading work instruction, engineering drawings, etc.
- To prepare and load raw materials and parts onto the machines.
- To monitor the machines while works in progress and make any necessary adjustments to produce a better result. ...
Be an early applicant!
Posted
18 hours ago
Undisclosed
Be an early applicant!
Posted
14 days ago
Undisclosed
Be an early applicant!
Posted
14 days ago
MYR2,200 - MYR2,500 Per Month
Fresh Graduates
- Build, modify, maintain, and troubleshoot engineering test fixtures and qualification setups.
- Collaborate with engineering teams to investigate issues, identify root causes, and drive timely issue closure
- Perform product testing, qualification, and failure analysis to support new product introductions, engineering evaluations, and customer requirements. ...
Be an early applicant!
Posted
20 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. Assist in the development and implementation of supplier management programs. ...
Be an early applicant!
Posted
14 days ago
Undisclosed
- To support the Purchasing department in the supplier quality performance evaluation & supplier audit.
- Participate in supplier audit, qualify or disqualify suppliers according to organization's standards.
- Maintain successful relationships with suppliers, engineering, manufacturing & regulatory departments. ...
Be an early applicant!
Posted
20 days ago
Undisclosed
- Responding to production maintenance calls within the defined response time.
- Performing basic electrical, mechanical, pneumatic, hydraulic, and control-system troubleshooting, according to competency level.
- Updating maintenance checklists, work orders, repair records, and spare-part usage records. ...
Be an early applicant!
Posted
20 days ago
CNC Machinist Group Leader
Undisclosed
- Set up, operate, and maintain CNC machines to perform precision machining operations.
- Read and interpret engineering drawings, blueprints, and technical documents.
- Inspect and measure finished products to ensure they meet specifications. ...
Be an early applicant!
Posted
a month ago
MYR3,000 - MYR4,500 Per Month
George Town, Pulau Pinang
- Preparing submission documents, follow up, making compliance to authorities' requirements and comments in order to obtain approval or permit to start work and grant CCC upon completion.
- Attending meetings, site visit, inspections and testing to ensure the site works are in compliance and of good quality.
- Lead and monitor designer and draftperson to make sure the deliverables are meeting project's needs and mistake-free. ...
Posted
6 days ago
MYR2,000 - MYR2,800 Per Month
- Assist project teams during project execution.
- Prepare service reports, installation records, and technical documentation.
- Support factory acceptance testing (FAT), site acceptance testing (SAT), and customer training activities. ...
Posted
16 days ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
- Collaborate with cross-functional teams, including quality control and maintenance, to resolve production-related problems and ensure continuous improvement.
- Gain hands-on experience with plastic injection molding processes and equipment, including injection molding machines and associated tooling.
- Contribute to data collection and analysis related to production output, cycle times, and defect rates to identify areas for optimization. ...
Posted
6 days ago
Undisclosed
- Troubleshoot and resolve issues related to CNC machinery and programs.
- Perform routine maintenance on machines and equipment.
- Train and mentor junior machinists and operators. ...
Posted
19 days ago
MYR1,700 - MYR2,500 Per Month
- Ensure works are performed according to technical specifications, approved procedures and safety requirements.
- Ensure CCTV systems and related equipment are installed and maintained properly.
- Report work completion status, technical issues, defects and site conditions to the Senior Technical Executive / Team Leader. ...
-Willing and able to travel between project sites within the Northern Zone.
-Willing to work after hours
+4
Be an early applicant!
Posted
24 days ago
Bending Technician/ Operator
MYR1,700 - MYR3,000 Per Month
- To ensure the bending process produce best results as per customer requirement.
- To perform in-process quality inspection and measurement of finished products and compare them with requirements using proper inspection tools.
- To perform daily machinery inspection with checklist recorded & maintained to ensure machines functionality. ...
Posted
19 days ago
MYR5,000 - MYR6,000 Per Month
- Quality issue analysis: Coordinate the team, use tools such as 5Why, fishbone diagram, and 8D report to conduct root cause analysis on customer complaints or internal non-conforming products, formulate corrective and preventive measures, track and verify the closed-loop effect, and write reports.
- Quality Data Management: Query, analyze or output production quality data (such as pass rate, failure rate, MSA) through tools like MES and Minitab, monitor production conditions, and confirm improvement directions.
- Quality Training and Awareness Enhancement: Develop quality awareness training materials, carry out QCC (Quality Control Circle) activities, and enhance the quality responsibility of all staff. ...
Be an early applicant!
Posted
5 days ago
MYR2,000 - MYR3,000 Per Month
- Assist with the installation of solar panels on rooftops and ground-mounted structures
- Collaborate with senior technicians and engineers on system upgrades, retrofits and expansions
- Ensure installations are completed according to project specifications and timelines ...
Posted
3 days ago
Technical Service Engineer (Mandarin Speaker)
MYR2,500 - MYR4,000 Per Month
George Town, Pulau Pinang
- Maintain good relationships with customers and provide quality after-sales support.
- Liaise and work closely with customers to address service concerns and resolve technical issues.
- Take charge of assigned products and ensure smooth operations while providing continuous service support. ...
Posted
15 days ago
MYR2,000 - MYR2,800 Per Month
+Additional Compensation
- Perform other repair works in the unit as required.
- Ensure all tasks are carried out professionally, ethically, and in a timely manner.
- Perform any other duties and responsibilities assigned by the management. ...
Posted
24 days ago
MYR2,000 - MYR3,000 Per Month
Fresh Graduates
- Attend to and troubleshoot motorbikes/superbikes
- Carry out job orders as instructed by the Team Leader.
- Ensure the workshop is clean and well-maintained. ...
Be an early applicant!
Posted
4 days ago
Mechanical & Electrical Technician / Electrical Assembler
MYR2,500 - MYR3,500 Per Month
- Maintain a clean, organized, and safe working environment.
- Assemble electrical and electronic components according to technical drawings and schematics.
- Perform wiring, soldering, and testing of electrical components. ...
Posted
13 days ago
MYR2,100 - MYR4,000 Per Month
Fresh Graduates
- Works from guidelines and standardized procedures/instructions.
- May design/build tools. Box build level debug and PCA level troubleshooting and rework
- Duties may be related to installation, maintenance, repair and support of manufacturing equipment, technical support of one or more production processes, product test and troubleshooting, and technical analyses and problem-solving. ...
Posted
13 days ago
MYR2,000 - MYR5,000 Per Month
Posted
14 days ago
MYR2,200 - MYR2,500 Per Month
+Additional Compensation
Fresh Graduates
- Perform Test cycle with correct sequent as per PMS Work Instruction.
- Perform Test fixture daily cleaning cycle per Work Instruction
- Perform 5S at Test Work Benches before start of Shift work. ...
Be an early applicant!
Posted
25 days ago
MYR6,000 - MYR8,000 Per Month
George Town, Pulau Pinang
- Use OpenAI Codex or similar AI coding tools to accelerate development, debugging, refactoring, and documentation.
- Review and validate AI-generated code before use.
- Use GitHub for version control, branches, commits, pull requests, code reviews, and change tracking. ...
Posted
a month ago
Undisclosed
- Conduct training for assembly technicians
- Analysis of the training data for any improvement needed
- Maintain records of trainee progress and performance ...
Be an early applicant!
Posted
14 days ago
MYR2,300 - MYR3,000 Per Month
+Additional Compensation
- Precision Trimming & Fitting: Carefully trim, adjust, and fit dental models using specialized hand tools and micro-motors.
- Surface Sanding & Finishing: Use various grades of sandpaper, burs, and rotary tools to smooth out rough edges and shape pieces to exact specifications.
- High-Shine Polishing: Polish completed dental work using polishing wheels, compounds, and steam cleaners to achieve a flawless, smooth, and high-gloss finish.
Posted
a month ago
Quality Assurance (QA) Manager
MYR5,000 - MYR7,000 Per Month
- Review and monitor inspection reports, quality records, and production quality performance.
- Handle customer complaints, non-conformities, and quality issues.
- Lead CAPA, 8D, Root Cause Analysis, 5 Why, and corrective/preventive actions. ...
Posted
2 days ago
Undisclosed
- Liaise with internal team in reviewing the incoming material rejection from IQC and production with disposition action and feedback to supplier if rejection proved to be valid.
- Issue SCAR to supplier non conformance incoming lot and drive the supplier for root cause and corrective action(s) (RCCA) (8D, 5-Whys, FMEA, SPC) to eliminate recurring quality issues.
- Conduct an investigation and complete justification report on rejection feedback by IQC, production and customer side if the issue is caused by the supplier side. ...
Posted
a month ago
Job searches related to “Engineering”