Jobs
Companies
Forums
400+ Ui Jobs in Pulau Pinang - August 2026 - High Salaries
Showing 465 jobs results for
"ui"
in Pulau Pinang
Never miss any updates for Ui jobs in Pulau Pinang
Manage Alert
Undisclosed
Malaysia
- Bench testing and debugging of reliability test circuits / boards verification.
- Operation of measurement equipment such as curve tracer, oscilloscope and multimeters for supporting in-house calibration activities.
- Know-how in reliability stress testing eg. Environmental, Electrical/ Functional, and acoustics stress testing. ...
Posted
16 days ago
Undisclosed
- Planning, control and implementation of global IT projects in the SAP technology environment.
- Control of external service providers.
- Creation of solution documentation and procedural instructions. ...
Posted
16 days ago
Undisclosed
- Successfully executes responsibilities under supervision in accordance with good manufacturing practices and Plexus' Manufacturing Processes AND provide support to direct production line operators as it applies to their role.
- Basic Understanding of Equipment / Process control / Safety / Risk Awareness / setup awareness / operation of, as it applies to their role.
- A minimum of a Bachelor's degree in a discipline related to Electronics / Manufacturing / Engineering or Science. ...
Posted
16 days ago
Undisclosed
George Town
- Participate in customer and annual basis quality audit at OSAT
- Investigate both internal/customer quality concerns and drive 8D corrective/preventive actions related to the quality issues
- Initiate, organize, and finalize disposition for non-conforming lot and expired material at subcon through SLD (Subcon Lot Disposition) and NCRB (Non-conforming review board) ...
Posted
16 days ago
Undisclosed
Malaysia
- Support R&D month-end closing in compliance with accounting standards and group policies, including but not limited to:
- Walk through each R&D cost center and R&D project to ensure the correctness of GL bookings.
- Prepare and post accruals for R&D costs incurred. ...
Posted
16 days ago
Undisclosed
George Town
- The candidate will work closely with RTL design team to ensure successful tapeouts.
- BS/MS in EE/CS with 3+ years of hands-on experience in physical design and verification.
- Experienced with ASIC design flow, static timing analysis, EM/ IR anlysis ...
Posted
16 days ago
Undisclosed
- Upload and release PCBA Bills of Materials (BOMs) BOMs in PLM and ERP systems.
- Perform data verification and validation to ensure consistency and accuracy between drawings, BOMs, PLM records, and ERP records.
- Support Engineering Change Requests (ECRs) and Enterprise Change Orders (ECOs) by updating documentation, BOMs, and related product records. ...
Posted
16 days ago
Undisclosed
- Update and report key Industrial Engineering metrics for assigned customer or area
- Drive key process mapping activities within the assigned customer or area
- Drive the standardization SAP and Manufacturing Execution System configurations ...
Posted
15 days ago
Undisclosed
George Town
- Maintain hardware database integrity including testers, handlers, probers, load boards, sockets, probe cards, cables, and spare parts.
- Perform asset audits, inventory reconciliation, and equipment utilization reviews.
- Design circuits and customized production tooling for IC final test, wafer probe, and module testing based on existing Microchip standards. ...
Posted
15 days ago
Undisclosed
Prai
- Ensure project meeting the PAR expenses, lead time, capacity, and product quality expectation.
- Supporting technical documentation of the production processes.
- Optimizing production cost, process improvement and COPQ reduction. ...
Posted
15 days ago
Undisclosed
Malaysia
- Train the operators in production to ensure they meet performance and safety requirements.
- Compiles and monitor production rejection, waste, down time and yield.
- Handle customer complaints, NCRs, CAPAs and implement corrective actions to prevent recurrence. ...
Posted
13 days ago
Undisclosed
Malaysia
- Involve in top 80% defect analysis from market complaint and compile the analysis report.
- Work with QM R&D / QM Operation - to provide input in the update of product / process risk document that initiated due to market complaint.
- Involve in CAPA / NCR / Planned Deviation as required. ...
Posted
13 days ago
MYR2,000 - MYR2,900 Per Month
WFH
- Resolves problems with customers via inbound telephone, email or chat sessions using technical product knowledge and interpersonal skills.
- Communicates basic technical solutions to customers using effective communication, listening, and comprehension skills.
- Demonstrates ability toarticulate technical issues in simple to understand terms to both management and customers. ...
Posted
12 days ago
Undisclosed
- Ensure compliance with safety, quality, and operation standards.
- Involvement in CIP (continuous Improvement Project).
- Maintain maintenance records, logs and reports. ...
Posted
12 days ago
Undisclosed
Malaysia
- Perform exploratory data analysis (EDA) across multiple manufacturing data sources to uncover patterns, root causes, and improvement opportunities.
- Design, develop, and deploy Advanced Process Control (APC) and Machine Learning models to address manufacturing quality and process challenges.
- Collaborate with cross-functional teams including Process Engineering, Equipment Engineering, Quality, IT, and Operations to implement and sustain SPC, FDC, RMS, APC, and ML-based solutions. ...
Posted
12 days ago
Undisclosed
Malaysia
- Knowledgeable in the Prober, Tester, probe card management and machine troubleshooting with any additional wafer equipment knowledge.
- Bachelor of Engineering (Hons) in Electronics,Computer Science and Information Technology.
- Able to present comfortablyina big group of employees. ...
Posted
12 days ago
Undisclosed
Malaysia
- Collaborate with SOC and Incident Response teams to contextualize threat intelligence and improve detection and response capabilities
- Generate actionable intelligence reports and briefings for security teams and executive stakeholders
- Lead projects to improve Threat Intelligence operations, workflows and tooling to enable faster detection, contextualized analysis, and proactive mitigation of emerging threats across the organization ...
Posted
12 days ago
Undisclosed
George Town
- Ensure compliance with safety, quality, and operation standards.
- Involvement in CIP (continuous Improvement Project).
- Maintain maintenance records, logs and reports. ...
Posted
12 days ago
Undisclosed
Malaysia
- Perform exploratory data analysis (EDA) across multiple manufacturing data sources to uncover patterns, root causes, and improvement opportunities.
- Design, develop, and deploy Advanced Process Control (APC) and Machine Learning models to address manufacturing quality and process challenges.
- Collaborate with cross-functional teams including Process Engineering, Equipment Engineering, Quality, IT, and Operations to implement and sustain SPC, FDC, RMS, APC, and ML-based solutions. ...
Posted
12 days ago
Undisclosed
George Town
- Review and approve plant operation EMOC from process perspective.
- Support relevant process expertise like P&ID markup, process design calculation, equipment sizing, pipeline pressure drop simulation, etc.
- Support new plant commissioning as needed. ...
Posted
10 days ago
Undisclosed
- Influencing the product design to ensure materials manufacturability and conformance with the global supply chain.
- Collaborating with procurement and internal product team to improve/ sustain products and processes through technical understanding about material technology obsolescence and future road map.
- To lead and work with suppliers for technical specifications study and perform root cause analysis to meet Keysight quality expectation. ...
Posted
11 days ago
Undisclosed
- Create, review, and coordinate Engineering Change Orders implementation with the CM partner and make process improvement recommendations.
- Acts as a primary interface with the Teradyne NPI Ops team / Engineering team during the release of a new assemblies or revisions to assemblies already in use.
- To work with the CM partner to drive operation improvement. ...
Posted
11 days ago
Undisclosed
George Town
- Work on fab/assembly process improvement activities, supporting manufacturing ramp and perform risk assessment and risk mitigation for new product development.
- Lead product yield excursion. Define business impact, identify root cause and implement corrective actions.
- Analyze customer return, implement corrective actions and support OSAT audits ...
Posted
11 days ago
Undisclosed
- Lead cross-functional collaboration with R&D, Supply Chain, Quality, Manufacturing, and worldwide suppliers to resolve complex technical and manufacturing issues.
- Provide technical guidance, mentor engineers and strengthen internal technical capabilities.
- Bachelor’s or Master’s Degree in Mechanical Engineering or equivalent. ...
Posted
11 days ago
Undisclosed
Malaysia
- -Serve as the integration contact for customers, frontend, backend, and testing
- -Plan and confirm product roadmap, milestones, and risk plans.
- Process Integration and Specification Definition (Process Integration) ...
Posted
11 days ago
Undisclosed
George Town
- Review product development requirements for compatibility with processing methods to determine costs and schedules
- Integrates equipment and material capabilities to meet process module and technology specifications
- Drive CIP (Continuous improvement plans) to improve process performance indices ...
Posted
10 days ago
Undisclosed
Malaysia
- Participate in incident triage by collecting logs,validatingsymptoms, documenting troubleshooting steps, and escalating issues with clear technical details.
- Maintainaccuratenetwork documentation, diagrams, implementation notes, and handover details for assigned tasks.
- Work with peers, operations teams, vendors, and other IT functions to complete assigned service requests and project tasks on time and with quality. ...
Posted
10 days ago
Undisclosed
Malaysia
- Define correct test conditions and develop test flows to meet volume production testing requirements for advanced memory devices.
- Plan and execute product evaluation and design of experiments (DOE) focused on reliability, DPPM reduction, and die sort yield improvement.
- Perform test time analysis to optimize test methods for cost efficiency while maintaining strict quality standards. ...
Posted
10 days ago
Undisclosed
Prai
- Responsible to support SEA plant operations (Malaysia, Indonesia and Thailand) to ensure plant process safety operation, productivity achievement and cost effectiveness in unit operations.
- PRINCIPAL ACCOUNTABILITIES
- Drive plant process optimization and generate new continuous improvement idea to achieve plant productivity target. ...
Posted
10 days ago
Job searches related to “Ui”
Browse Location:
More Location
Browse Company:
More Companies
Browse "ui" Job By:
Browse "ui" Job By:
More Industries