31 Technical Repair Jobs in Shah Alam - September 2026 - High Salaries
Showing 31 jobs results for
"technical repair"
in Shah Alam
Undisclosed
Near Train Station
- Ensure repair performed are within stipulated time
- Adhering all regulation safety & health and best practice
- Ensure job performed service & repair meet as per standard ...
Be an early applicant!
Posted
a day ago
MYR2,000 - MYR3,000 Per Month
- Respond to service calls and provide on-site technical support and repair services to customers, effectively resolving issues to minimize downtime.
- Maintain accurate records of all maintenance, repair activities, and parts used, ensuring comprehensive documentation for service history and inventory management.
- Adhere to all safety regulations and company procedures during maintenance and repair operations, promoting a safe working environment. ...
Be an early applicant!
Posted
a month ago
MYR4,500 - MYR5,500 Per Month
- Assist in scheduling and completing service and maintenance plans.
- Assist in conducting training programs for customers and channel partners.
- Prepare technical reports related to compressor systems and provide feedback to other departments, as well as assist in implementing improvement initiatives. ...
Be an early applicant!
Posted
a day ago
MYR1,700 - MYR3,000 Per Month
Fresh Graduates
- Conduct car-related servicing and maintenance.
- Assist with basic vehicle servicing, maintenance and repair work.
- Check tyre condition and identify potential tyre-related issues. ...
Be an early applicant!
Posted
15 days ago
MYR2,500 - MYR3,500 Per Month
- Continuously monitor the quality and yield of the operations and take corrective and preventive actions to ensure conformance.
- To ensure that all necessary fixtures, tools and related items for initial run are correctly set-up, using the given tool list.
- Support test cuts on new project (FA) and initial run parts. Ensure the correct NC program, Jigs fixture, Tools list and tool table are properly loaded at the appropriate machine to produce the correct part before the start production. ...
Posted
21 days ago
MYR2,500 - MYR4,000 Per Month
- Conduct routine inspections and identify potential safety or technical problems.
- Follow company procedures, safety regulations, and instructions from supervisors.
- Perform installation, maintenance, inspection, and repair of equipment and technical systems at project sites. ...
Posted
2 days ago
MYR4,500 - MYR5,500 Per Month
- Assist in scheduling and completing service and maintenance plans.
- Assist in conducting training programs for customers and channel partners.
- Prepare technical reports related to compressor systems and provide feedback to other departments, as well as assist in implementing improvement initiatives. ...
Be an early applicant!
Posted
a day ago
MYR4,500 - MYR5,500 Per Month
- Assist in scheduling and completing service and maintenance plans.
- Assist in conducting training programs for customers and channel partners.
- Prepare technical reports related to compressor systems and provide feedback to other departments, as well as assist in implementing improvement initiatives. ...
Be an early applicant!
Posted
a day ago
MYR4,500 - MYR5,500 Per Month
- Assist in scheduling and completing service and maintenance plans.
- Assist in conducting training programs for customers and channel partners.
- Prepare technical reports related to compressor systems and provide feedback to other departments, as well as assist in implementing improvement initiatives. ...
Be an early applicant!
Posted
a day ago
MYR4,500 - MYR5,500 Per Month
- Assist in scheduling and completing service and maintenance plans.
- Assist in conducting training programs for customers and channel partners.
- Prepare technical reports related to compressor systems and provide feedback to other departments, as well as assist in implementing improvement initiatives. ...
Be an early applicant!
Posted
a day ago
MYR1,700 - MYR3,000 Per Month
Fresh Graduates
- Conduct car-related servicing and maintenance.
- Assist with basic vehicle servicing, maintenance and repair work.
- Check tyre condition and identify potential tyre-related issues. ...
Be an early applicant!
Posted
15 days ago
MYR1,700 - MYR3,000 Per Month
Fresh Graduates
- Conduct car-related servicing and maintenance.
- Assist with basic vehicle servicing, maintenance and repair work.
- Check tyre condition and identify potential tyre-related issues. ...
Be an early applicant!
Posted
15 days ago
MYR1,700 - MYR3,000 Per Month
Fresh Graduates
- Conduct car-related servicing and maintenance.
- Assist with basic vehicle servicing, maintenance and repair work.
- Check tyre condition and identify potential tyre-related issues. ...
Be an early applicant!
Posted
15 days ago
MYR1,700 - MYR3,000 Per Month
Fresh Graduates
- Conduct car-related servicing and maintenance.
- Assist with basic vehicle servicing, maintenance and repair work.
- Check tyre condition and identify potential tyre-related issues. ...
Be an early applicant!
Posted
15 days ago
MYR1,700 - MYR3,000 Per Month
Fresh Graduates
- Conduct car-related servicing and maintenance.
- Assist with basic vehicle servicing, maintenance and repair work.
- Check tyre condition and identify potential tyre-related issues. ...
Be an early applicant!
Posted
15 days ago
MYR1,700 - MYR3,000 Per Month
Fresh Graduates
- Conduct car-related servicing and maintenance.
- Assist with basic vehicle servicing, maintenance and repair work.
- Check tyre condition and identify potential tyre-related issues. ...
Be an early applicant!
Posted
15 days ago
MYR2,500 - MYR3,500 Per Month
- Continuously monitor the quality and yield of the operations and take corrective and preventive actions to ensure conformance.
- To ensure that all necessary fixtures, tools and related items for initial run are correctly set-up, using the given tool list.
- Support test cuts on new project (FA) and initial run parts. Ensure the correct NC program, Jigs fixture, Tools list and tool table are properly loaded at the appropriate machine to produce the correct part before the start production. ...
Posted
21 days ago
MYR2,500 - MYR3,500 Per Month
- Continuously monitor the quality and yield of the operations and take corrective and preventive actions to ensure conformance.
- To ensure that all necessary fixtures, tools and related items for initial run are correctly set-up, using the given tool list.
- Support test cuts on new project (FA) and initial run parts. Ensure the correct NC program, Jigs fixture, Tools list and tool table are properly loaded at the appropriate machine to produce the correct part before the start production. ...
Posted
21 days ago
MYR2,500 - MYR4,000 Per Month
- Conduct routine inspections and identify potential safety or technical problems.
- Follow company procedures, safety regulations, and instructions from supervisors.
- Perform installation, maintenance, inspection, and repair of equipment and technical systems at project sites. ...
Posted
a month ago
MYR2,500 - MYR4,000 Per Month
- Conduct routine inspections and identify potential safety or technical problems.
- Follow company procedures, safety regulations, and instructions from supervisors.
- Perform installation, maintenance, inspection, and repair of equipment and technical systems at project sites. ...
Posted
a month ago
MYR1,700 - MYR3,000 Per Month
Fresh Graduates
- Conduct car-related servicing and maintenance.
- Assist with basic vehicle servicing, maintenance and repair work.
- Check tyre condition and identify potential tyre-related issues. ...
Be an early applicant!
Posted
15 days ago
MYR1,700 - MYR3,000 Per Month
Fresh Graduates
- Conduct car-related servicing and maintenance.
- Assist with basic vehicle servicing, maintenance and repair work.
- Check tyre condition and identify potential tyre-related issues. ...
Be an early applicant!
Posted
15 days ago
MYR2,500 - MYR3,500 Per Month
- Continuously monitor the quality and yield of the operations and take corrective and preventive actions to ensure conformance.
- To ensure that all necessary fixtures, tools and related items for initial run are correctly set-up, using the given tool list.
- Support test cuts on new project (FA) and initial run parts. Ensure the correct NC program, Jigs fixture, Tools list and tool table are properly loaded at the appropriate machine to produce the correct part before the start production. ...
Posted
21 days ago
MYR2,500 - MYR3,500 Per Month
- Continuously monitor the quality and yield of the operations and take corrective and preventive actions to ensure conformance.
- To ensure that all necessary fixtures, tools and related items for initial run are correctly set-up, using the given tool list.
- Support test cuts on new project (FA) and initial run parts. Ensure the correct NC program, Jigs fixture, Tools list and tool table are properly loaded at the appropriate machine to produce the correct part before the start production. ...
Posted
21 days ago
MYR2,500 - MYR3,500 Per Month
- Continuously monitor the quality and yield of the operations and take corrective and preventive actions to ensure conformance.
- To ensure that all necessary fixtures, tools and related items for initial run are correctly set-up, using the given tool list.
- Support test cuts on new project (FA) and initial run parts. Ensure the correct NC program, Jigs fixture, Tools list and tool table are properly loaded at the appropriate machine to produce the correct part before the start production. ...
Posted
21 days ago
MYR2,500 - MYR3,500 Per Month
- Continuously monitor the quality and yield of the operations and take corrective and preventive actions to ensure conformance.
- To ensure that all necessary fixtures, tools and related items for initial run are correctly set-up, using the given tool list.
- Support test cuts on new project (FA) and initial run parts. Ensure the correct NC program, Jigs fixture, Tools list and tool table are properly loaded at the appropriate machine to produce the correct part before the start production. ...
Posted
21 days ago
MYR2,500 - MYR3,500 Per Month
- Continuously monitor the quality and yield of the operations and take corrective and preventive actions to ensure conformance.
- To ensure that all necessary fixtures, tools and related items for initial run are correctly set-up, using the given tool list.
- Support test cuts on new project (FA) and initial run parts. Ensure the correct NC program, Jigs fixture, Tools list and tool table are properly loaded at the appropriate machine to produce the correct part before the start production. ...
Posted
21 days ago
MYR2,500 - MYR4,000 Per Month
- Conduct routine inspections and identify potential safety or technical problems.
- Follow company procedures, safety regulations, and instructions from supervisors.
- Perform installation, maintenance, inspection, and repair of equipment and technical systems at project sites. ...
Posted
a month ago
MYR3,000 - MYR4,500 Per Month
- Field & Site Service: Attend on-site service calls, breakdowns, and maintenance requests at customer facilities, construction sites, and oil & gas plants.
- Testing & Quality Checks: Conduct load tests and operational testing on reconditioned and rented diesel equipment prior to delivery.
- Documentation: Keep clear records of maintenance logs, parts replaced, and service reports. ...
Be an early applicant!
Posted
a month ago