200+ Quality Engineer Jobs in Johor - September 2026 - High Salaries

Showing 235 jobs results for "quality engineer" in Johor
Never miss any updates for Quality Engineer jobs in Johor
  • Handle customer quality complaints and coordinate internal teams to investigate, respond and close issues.
  • Assist Manufacturing Product Management (MPM) in addressing customer quality-related requirements and expectations.
  • Establish and maintain quality control plans; ensure manufacturing processes comply with defined control plan requirements. ...
Posted
4 days ago

Allied Technologies Holdings

  • Record inspection results and maintain quality documentation.
  • Identify and report non-conforming products.
  • Work with production and warehouse teams to resolve quality issues. ...
Posted
4 days ago
  • Record test results accurately and maintain proper testing documentation.
  • Troubleshoot test failures and identify basic equipment, fixture, or product-related issues.
  • Escalate recurring or complex test issues to the Test Engineer or relevant department. ...
Posted
5 days ago

Ronnie Electronics (J) Sdn Bhd

  • Perform quality patrol and monitor production processes.
  • Maintain inspection records and quality documentation.
  • Operate measuring and inspection equipment. ...
Posted
7 days ago

Kes Systems & Service

  • Troubleshoots boards: driver and burn-in boards
  • Records troubleshooting data
  • Support Production for boards testing ...
Posted
9 days ago

CHINA COMMUNICATIONS CONSTRUCTION COMPANY (M) SDN. BHD.

  • When can you commence to work?
  • How much is your expected salary?
  • Do you hold a valid CIDB Green Card for entry into construction sites? ...
Posted
8 days ago
  • Participate in cost reduction, cost saving, carrier set-up and carrier spare parts. Improve efficiency of carrier maintenance time.
  • To investigate the process and quality failure resulting from equipment/process related problems and provide permanent solution to fix them.
  • Provide coaching and training to technicians on the carrier service and repair activities. ...
Posted
19 days ago
  • Responsible for coordinating revisions to Acceptance Procedures with Masimo Corporate;
  • Ensures that required inspection equipment is available, maintained, and calibrated;
  • Initiates actions required to prevent and/or eliminate the occurrence or recurrence of all nonconformities relating to the product, process, and/or quality system. ...
Posted
10 days ago

SENTRONICS PRECISION INDUSTRY (M) SDN BHD

  • Use measuring tools including vernier calipers, micrometers, height gauges, and other precision instruments
  • Perform routine patrol inspections at defined intervals to monitor ongoing production quality
  • Monitor and record key process parameters to ensure compliance with specifications ...
Posted
11 days ago
  • Lead the risk-based quality planning process and develop inspection/test strategies.
  • Quality Control
  • Oversee daily inspection activities for civil, structural, mechanical, electrical, and finishing works. ...
Posted
11 days ago

Cape Manufacturing (M) Sdn Bhd

  • Use approved inspection and measuring tools to verify dimensions, appearance, and other quality characteristics.
  • Ensure products and processes comply with quality standards, ESD controls, regulatory requirements, and customer requirements.
  • Record inspection results, defects, quantities, and dispositions accurately for traceability. ...
Posted
15 days ago

PNE Electric Sdn Bhd

  • Understand IPC-A-610 standard.
  • Understand and audit on production line process and equipment setup. Ensure all the documents (PWI) used for process are tally with BOM/Engineering and assembly drawing.
  • Inform the superior and concerned departmental representatives on the nature of non-conformance detected during auditing. ...
Posted
15 days ago
  • Documents products that do not meet technical specifications using specified systems. Trains others in the use of measurement equipment, segregation of non-conforming product and documentation.
  • Follows the norms and standards of quality defined by the Company.
  • Reports progress on problem resolution to management. Assists in the development of new methods and procedures. ...
Posted
15 days ago

Hawk Soon Hin Industries Sdn Bhd (OSK Filter)

Simpang Renggam

  • Coordinate Maintenance or Toolroom support when required and follow up until the issue is resolved.
  • Support OEE, downtime, cycle time, productivity, scrap and process improvement activities.
  • Perform and support machine/process setting verification, including equipment such as leak testers. ...
Posted
15 days ago
  • Monitor and follow up on OOS/OOT, CAPA, Deviations, Laboratory Investigations and other QMS activities to ensure timely completion and closure.
  • Ensure QC activities comply with approved SOPs, specifications, GMP, data integrity and applicable regulatory requirements.
  • Monitor batch release-related QC activities and proactively escalate any issues that may impact product release. ...
Posted
15 days ago
  • Performs preventive maintenance and calibration checks to ensure test equipment accuracy and reliability.
  • Diagnoses hardware, fixture, and product-related issues using technical knowledge and systematic problem-solving techniques.
  • Ensures accurate and timely execution of testing to support production schedules. ...
Posted
16 days ago
  • Handle customer quality complaints and coordinate internal teams to investigate, respond and close issues.
  • Assist Manufacturing Product Management (MPM) in addressing customer quality-related requirements and expectations.
  • Establish and maintain quality control plans; ensure manufacturing processes comply with defined control plan requirements. ...
Posted
23 days ago
  • Verify that site construction QA/QC maintain complete and accurate quality records, ITP signoffs, test packs, and turnover documentation.
  • Perform basic data crunching and analysis (e.g., NCR counts by trade/contractor/system, first-time-right rates, repeat-defect frequency, inspection pass/fail ratios, etc).
  • Identify emerging trends, recurring issues, and problem areas from the data, and flag them to the QA/QC Manager for action. ...
Posted
24 days ago

Tampoi

  • Perform visual and dimensional inspection of incoming materials.
  • Inspect electronic components using microscope, magnifier, vernier caliper, multimeter, or other inspection tools when required.
  • Record incoming inspection results accurately. ...
Posted
3 days ago

Swis Resources Sdn Bhd

  • Coordinate with site teams, contractors, and engineers on inspection and quality-related matters.
  • Monitor site activities and assist in ensuring quality standards and procedures are followed.
  • Assist in tracking inspection requests, test results, and rectification works. ...
Posted
2 days ago
  • Ensure raw material and finished product quality meet established specifications.
  • Communicate any food safety (FS) or quality assurance (QA) issues, abnormalities, or non-conformances to the immediate superior promptly.
  • Maintain laboratory cleanliness and organization through good housekeeping and 5S practices. ...
Posted
4 days ago

Tampoi

  • Investigate quality issues, customer complaints, and non-conformance cases, and implement corrective and preventive actions (CAPA).
  • Analyze quality data and prepare reports on quality performance and improvement activities.
  • Collaborate with production, engineering, and other departments to drive continuous improvement initiatives. ...
Posted
25 days ago
  • Support in developing/transferring analytical methods and ensure the accuracy and precision of analyses
  • Support LIMS masterdata update and improvement projects (site & global)
  • Support periodic review activities for equipment/system/methods ...
Posted
a month ago

Malaysia

  •  Conduct internal and external ISO audits and certification activities
  •  Provide ISO compliance training and guidance to employees
  •  Collaborating with cross-functional teams to address of non-conformities and improvement actions ...
Posted
21 days ago
  • Prepare all necessary tools, instruments and documentation needed to perform inspection.
  • Provide guidance to trainee or junior inspectors when on the job.
  • Supervise inspection team when required. ...
Posted
21 days ago
Posted
22 days ago
  • Prepare all necessary tools, instruments and documentation needed to perform inspection.
  • Provide guidance to trainee or junior inspectors when on the job.
  • Supervise inspection team when required. ...
Posted
22 days ago

SHS Plastics Industries

  • Assist in customer audit.
  • Assist in customer satisfaction issue.
  • Monitor the quality of daily output, incoming & outgoing products. ...
Posted
14 days ago

LKT FOOD INDUSTRIES SDN. BHD.

  • Responsible, detail-oriented, and able to work in a team.
  • Conduct quality inspections on raw materials, production processes, and finished products.
  • Monitor product quality to ensure compliance with company standards. ...
Posted
15 days ago
  • This position is contract basis, are you okay with it?
  • Diploma/Advanced Diploma (Required)
  • QAQC Precast: 1 year (Required) ...
Posted
16 days ago