Jobs
Companies
Forums
200+ Quality Assurance Engineer Jobs in Pulau Pinang - September 2026 - High Salaries
search.result_querys_job
"quality assurance engineer"
text.in Pulau Pinang
不要错过任何 Quality Assurance Engineer 的新工作机会 在 Pulau Pinang
管理提醒
CLASSA INDUSTRIAL (M) SDN BHD
MYR3,000 - MYR4,500 每月
Malaysia
- Verify and follow up on corrective/preventive actions (NMPR).
- Monitor customer quality performance and participate in 8D replies.
- Compile monthly IPQC and OQC reports. ...
Posted
2 days ago
Undisclosed
Malaysia
- Maintain effective quality control throughout the project lifecycle from mobilization to testing, commissioning and final handover.
- Conduct regular site inspections for CSA, architectural, MEP and related construction works.
- Verify workmanship, installation quality and materials against approved specifications and drawings. ...
Posted
16 days ago
MYR5,000 - MYR7,000 每月
- Monitor quality KPIs, yield, defect trends, and process performance.
- Work closely with Process, Equipment, Production, and NPI Engineering teams to resolve quality issues.
- Support NPI, new process qualification, product transfer, and engineering builds. ...
Posted
2 days ago
Undisclosed
- Handle customer feedback and coordinate investigation/improvement activities
- Coordinate regular review on process KPIV, KPOV control limits and reaction guides
- Drive for process FMEA ...
Posted
a month ago
Undisclosed
- • Review the quality of all materials at the site, ensure compliance with all project specifications and quality, and collaborate with the department for all material procurement and quality materials.
- • Supervise the effective implementation of all test and inspection schedules, ensure adherence to all procedures, and coordinate with various teams to perform quality audits on processes.
- • Assist site employees in ensuring knowledge of all quality standards, ensure compliance with all quality manuals and procedures, and collaborate with contractors and suppliers to maintain the quality of all systems. ...
Posted
a month ago
MYR2,000 - MYR3,000 每月
- Accurately document inspection findings, test data and non-conformances in quality logs or system
- Prepare and send ORT/REL samples to the lab at the specified frequency
- Free parking ...
Posted
22 days ago
MYR5,000 - MYR7,000 每月
- Monitor quality KPIs, yield, defect trends, and process performance.
- Work closely with Process, Equipment, Production, and NPI Engineering teams to resolve quality issues.
- Support NPI, new process qualification, product transfer, and engineering builds. ...
Posted
18 days ago
MYR2,500 - MYR2,500 每月
- Design, develop and implement process improvements to increase productivity, quality and cost-effectiveness.
- Conduct process capability studies, process validations and process optimisation activities.
- Identify and resolve manufacturing issues, including process bottlenecks, defects and equipment-related problems. ...
Posted
a month ago
ClassA Industrial (M) Sdn Bhd
Undisclosed
- Establish, review, and monitor SPC (X-bar, R Chart) control limits for critical dimensions.
- Verify and follow up on corrective/preventive actions (NMPR).
- Monitor customer quality performance and participate in 8D replies. ...
Posted
a month ago
CLASSA INDUSTRIAL (M) SDN BHD
MYR3,000 - MYR4,500 每月
Malaysia
- Verify and follow up on corrective/preventive actions (NMPR).
- Monitor customer quality performance and participate in 8D replies.
- Compile monthly IPQC and OQC reports. ...
Posted
a month ago
Undisclosed
Malaysia
- Your responsibilities will include:
- - Data Validation: Validate the accuracy, completeness, and consistency of output through data pipeline, ensuring it meets business requirements and quality standards.
- - Automation: Develop and maintain automation test cases using Python and/or Java to streamline data validation processes. ...
Posted
17 days ago
Undisclosed
Malaysia
- Experience: 1–2 Years (Mandatory)
- We are seeking a Test Automation Engineer with hands-on experience in automation testing and ITSM platforms.
- **Mandatory Skills:** ...
Posted
2 days ago
Undisclosed
Malaysia
- Lead overall scrap control and improvement for the responsible project/product.
- Implement quality policies, procedures and systems; maintain/update quality engineering work instruction in order to ensure the business procedures in line with QS and global standards.
- Involve in customer audit, implement responsible procedures and facilitate other departments to close their actions on time and fulfil requirement to our products and process in order to meet customer requirement and our quality system" ...
Posted
2 days ago
Undisclosed
Prai
- Drive continuous improvement initiatives to enhance product quality, reduce defects, and improve operational efficiency
- Maintain and ensure QMS /ESD /MSA are in place and in compliance in his/her area of responsibility.
- Ensure quality functions are implemented and carried out in accordance with one’s RRE. ...
Posted
a day ago
Undisclosed
Malaysia
- Test performance characterization includes test coverage, programming/calibration functions, automation, repeatability, reliability, safety, ergonomics, and supportability.
- BS degrees in Electrical Engineering or related fields with 2-5 years working experience.
- Know how on LabVIEW and Test Stand. ...
Posted
8 days ago
Undisclosed
Bandar Perai Jaya
- Create and review qualification plans for inner company product transfers (Process Review, Test Plan Development, PCN, etc.)
- Serve as a training resource for above mentioned measurement and test equipment, ensuring respective personnel understand their operation.
- Provide guidance and training to Manufacturing Quality Support personnel in the respective area. ...
Posted
8 days ago
MYR5,000 - MYR7,000 每月
Prai
- Prepare inspection specifications SIP and control plans based on drawings (including ECN/ECR design changes) and production process flow.
- Performs First Article Inspections, review of new product introduction sample reports and documents resulting data in accordance with Customer requirements.
- Ensure products compliance of customer requirements, 8D Report and industry standard. ...
Posted
10 days ago
MYR15,000 - MYR20,000 每月
- Root Cause Analysis & CAPA: Drive advanced problem-solving initiatives using 8D, FMEA, SPC, and Root Cause Analysis (RCA) to eliminate non-conformances and reduce Cost of Poor Quality (COPQ).
- Cross-Functional Collaboration: Partner with Engineering, Operations, Supply Chain, and Program Management to ensure design-for-manufacturability, seamless new product industrialization, and robust supplier quality management.
- Technology & Continuous Improvement: Identify, benchmark, and deploy modern QA technologies, automation inspection methodologies, and Six Sigma frameworks to elevate operational reliability and customer satisfaction. ...
Posted
10 days ago
Undisclosed
George Town
- Perform parametric tests on ATE with strong defect screening mentality
- Debug device and setup related issues and drive the issue to closure independently
- Analyze silicon results, do statistical analysis, find root cause for yield fall-outs, support failure analysis activities ...
Posted
16 days ago
Undisclosed
- Perform quality inspections during critical phases — pre-installation, during installation, post-installation, pre-handover, and commissioning.
- Identify non-conformances, document issues, coordinate with project team, and follow up on corrective and preventive actions (CAPA).
- Prepare and maintain quality documentation, inspection reports, non-conformance reports (NCR), test & inspection plans (TIP), and quality control logs. ...
Posted
17 days ago
Undisclosed
Prai
- Develop, validate, release and optimize ATE, automated test systems, test fixtures, test hardware and software.
- Establish test specifications, test coverage, test methods, calibration requirements and acceptance criteria.
- Support optical testing and characterization including optical power, wavelength, insertion loss, return loss, BER, eye diagram and other optical performance parameters, where applicable. ...
Posted
21 days ago
Undisclosed
- Participated in performing modelling of package substrate/PCB channels elements in 3D/2D EM simulation tools.
- Generated implementation guidelines for the layout improvements required to meet the Signal Quality requirements using 3D field and channel simulators (HFSS).
- Familiarised with PCB stack-up design, trade-offs in line geometries, PCB materials and surface finishes, vendor capabilities, Wire Harness and Cable Manufacturing Processes. ...
Posted
22 days ago
Undisclosed
Malaysia
- CI/CD & Execution: Configure and maintain GitHub Workflows to execute test suites on regular cadences (CI/CD), analyze automated run results, and effectively report defects with technical precision.
- Comprehensive Testing: Develop automated solutions for functional and nonfunctional testing, including system testing, integration testing, and end-to-end workflows involving hardware integrations (cameras, doors, access control systems).
- Quality Advocacy: Support an "automation-first" approach throughout the development lifecycle, helping ensure the system delivers an intuitive, reliable, and professional experience. ...
Posted
23 days ago
Undisclosed
- To manage incoming inspection activities to prevent shipment delays caused by inspection or disposition issues.
- To provide training to QA inspectors on quality control processes and best practices.
- To conduct sampling inspections and select appropriate tools for inspection based on engineering drawings. ...
Posted
24 days ago
MYR3,400 - MYR4,500 每月
- Resolve problems related to test program/equipment/testers and ensure minimal down time.
- Monitor product test yields and compile yield reports. Analyze and drive for continue improvement project for test yield and RMA FA issues.
- To ensure accurate document, record keeping and archive measurement data pertaining to product parameters as per requirements. ...
Posted
a month ago
MYR3,400 - MYR4,500 每月
- Resolve problems related to test program/equipment/testers and ensure minimal down time.
- Monitor product test yields and compile yield reports. Analyze and drive for continue improvement project for test yield and RMA FA issues.
- To ensure accurate document, record keeping and archive measurement data pertaining to product parameters as per requirements. ...
Posted
a month ago
Undisclosed
George Town
- Analyze manufacturing yield issues and field escapes; perform root cause analysis and implement preventive measures to ensure test continuity.
- Manage stakeholders and partners (CM/ODM/OEM) to provide Design for Test (DFT) feedback and ensure alignment on technical requirements.
- Collaborate with engineering teams to gain in-depth system hardware knowledge for new product introductions. ...
Posted
a month ago
Undisclosed
Malaysia
- Technical Expertise and Support: Support electrical failure analysis (EFA), to addressRMAs, production, reliability, and DPPM improvement. Analyze test results and deliver reports to stakeholders with actionable insights for improvement.
- Technical Communication and Documentation:Develop and deliver clear, concise technical reports and documentation, including EFA, work instructions, test equipment guidelines, test reports, and specifications.
- NPI Support:Co-lead NPI projects with NPI team, ensuring smooth transfer of test technology from LVM to mass production. ...
Posted
a month ago
job_search.browse_location:
job_search.more_location
job_search.browse_company:
job_search.more_company
job_search.browse_job_by_title: