900+ Electronics Engineering Jobs - June 2026 - High Salaries

显示924个工作的结果 "electronics engineering"

不要错过任何 Electronics Engineering 的新工作机会

Undisclosed
  • - Field Troubleshooting: Use diagnostic tools such as multimeters, oscilloscopes, and bus analysers to identify and fix electrical faults or communication bottlenecks in the field.
  • - Mechanical Calibration: Manually calibrate motors, linkages, and feedback sensors to ensure precise physical alignment and system accuracy.
  • - Prototyping & Fabrication: Assist in the rapid prototyping of new hardware iterations, including basic modifications to enclosures and mounting brackets. ...
Posted
16 days ago
MYR4,500 - MYR4,500 每月

Tampoi

  • Respond to customer issues regarding product quality
  • Resolve customer enquires related to quality and audit
  • Responsible for total corrective, preventive action ...
Posted
a day ago
Undisclosed

Singapore

  • Participates equipment benchmark selection and budgeting, delivery & installation, qualification acceptance buy-off, upgrading/evolution follow up.
  • Equipment inventory and transfer movement management to sustain supply chain environment, Fixed equipment asset reconciliation and decommission & disposition management at GOBM Organization
  • Contribute New Product Introduction (NPI) qualification to Mass Production(MP) equipment and tooling for testing across all subcon (OSAT). ...
Posted
a day ago
SGD6,500 - SGD6,500 每月

Singapore

  • Participate in failure investigations and assist in generating reports
  • Permanent
  • Up to $7,000 + PB ...
Posted
15 hours ago
SGD3,300 - SGD3,300 每月

Singapore

  • Attend to all customer enquiries
  • Provide sales forecast to plant for raw materials and production capacity planning
  • Work closely with oversea representative for new customers development activities ...
Posted
3 days ago
SGD3,500 - SGD3,500 每月

Singapore

  • Production Planning: Supervise and plan daily production schedules strictly according to incoming Sales Orders to ensure timely fulfillment.
  • Contract Manufacturer (CM) Coordination: Act as the primary liaison with our Contract Manufacturers, managing schedules and ensuring our production requirements are met.
  • NPI Collaboration: Work closely alongside NPI engineers to ensure quality production output and smooth manufacturing transitions from design to the factory floor. ...
Posted
4 days ago
SGD4,000 - SGD4,000 每月

Singapore

  • IEEE graduates an advantage but diploma holders must have electronics background
  • Must have good knowledge of local electronics business and be prepared to work hard meet the company’s goals and objectives
  • Understand what is a Memory, Logic, MosFets etc.. (Will provide training if needed) ...
Posted
5 days ago
MYR10,000 - MYR12,000 每月
  • Installation & Calibration: Support the installation, calibration, and maintenance of electronic control systems.
  • Compliance & Safety: Ensure all systems comply with safety, quality, and regulatory standards.
  • Documentation: Prepare and analyze technical drawings, reports, and electrical single-line diagrams. ...
Posted
16 days ago
MYR2,500 - MYR2,500 每月
  • Reviewing order & design in meeting Customer’s technical requirements.
  • Recommend & implement changes / modifications to improve & optimize design, manufacturing & testing processes.
  • Cost control & monitoring in meeting budget of the order or project. ...
Posted
16 days ago
SGD5,500 - SGD5,500 每月

Singapore

  • Perform product design activity which includes translating customer requirements into product drawings and product specification, design analysis and verification, tolerance analysis, DFMEA, etc.
  • Ensure product designs are validated per customer requirements, respecting international industry standards.
  • Take Project Leadership role, define and reconcile technical DFM with Process Design team ...
Posted
6 days ago
Undisclosed

Yishun

  • Develop and debug ICT test programs according to customer’s specifications while maximizing Keysight’s solution capabilities.
  • Develop new solutions and technologies to address customer requirements as part of the product planning team.
  • Research new areas to improve the testability of the customer’s products. ...
Posted
7 days ago
SGD6,000 - SGD6,000 每月

Singapore

  • Conduct prototype testing, troubleshooting, and support validation/qualification, including EMC and safety certifications.
  • Participate in the complete development lifecycle, including requirements analysis, design, testing, debugging, and documentation
  • Collaboration in international activities relevant for the development of the division. ...
Posted
7 days ago
Undisclosed

Jurong West

  • Coordinate with external labs on project testing needs when in-house support is not possible.
  • Initiate meetings to address product functional failures and ensure closure of test requests.
  • Review test results and compile test reports for product release and qualification. ...
Posted
7 days ago

Technofied Vision Pte Ltd

SGD1,800 - SGD3,390 每月

Singapore

  • Work with a variety of tools and equipment, including oscilloscopes, multimeters, and soldering irons
  • Follow safety protocols and maintain a clean and organized work area
  • Minimum of 2 years of experience in component-level electronic repair ...
Posted
2 days ago
SGD2,500 - SGD2,500 每月

Singapore

  • Test and service control panels, power supplies, sensors, and electronic circuits
  • Connect and configure TVs to hospital networks, IPTV systems, or set-top boxes
  • Perform preventive maintenance on both medical and non-medical electronics ...
Posted
2 days ago
SGD2,800 - SGD2,800 每月

Singapore

  • Operate diagnostic and repair tools such as oscilloscopes, multimeters, and soldering irons to conduct accurate testing and repairs
  • Follow safety protocols rigorously and maintain a clean, organized work environment to ensure workplace safety and efficiency
  • Minimum of 2 years of experience performing component-level electronic repairs ...
Posted
2 days ago
SGD2,000 - SGD2,000 每月

Singapore

  • Min Nitec in Engineering and relevant
  • Class 2B or 3 driving license required
  • Responsibilities ...
Posted
2 days ago
Undisclosed

KL City

  • Conduct stress and reliability tests (e.g., temperature cycling, vibration, ESD).
  • Debugging & Issue Resolution:
  • Use diagnostic tools (oscilloscopes, logic analyzers, multimeters) to troubleshoot hardware issues. ...
Posted
9 days ago

Agensi Pekerjaan Ideal Reliance Sdn Bhd

MYR2,200 - MYR2,300 每月
  • Salary: RM2,300.00
  • Assist the Service Team in conducting equipment diagnostics, testing, troubleshooting, and quality assurance activities.
  • Assess products returned from B2C and B2B customers, as well as service centres, to determine product condition and suitability for resale, reuse, refurbishment, recycling, or disposal. ...
Posted
5 days ago
MYR2,000 - MYR2,500 每月
  • Attend onsite troubleshooting and installation when required.
  • Escalate cases to the Manager if troubleshooting is unsuccessful.
  • Submit weekly reports. ...
Posted
5 days ago
Undisclosed
  • Manage test hardware and operations of ATE testers such as DTS tester, PFT tester, TESEC tester, and FET tester.
  • Collaborate with BU Product and Test Engineering and Lab Engineering Operations on new product test hardware and setup requirements.
  • Work closely with Vendors/Mfg TE/PE from test hardware design through fabrication to ensure readiness of test capability. ...
Posted
10 days ago
Undisclosed

Yishun

  • Troubleshoot and debug electronic components.
  • Ensure compliance with industry standards and safety regulations.
  • Degree in Electronics/Electrical Engineering or related field. ...
Posted
18 days ago
Undisclosed

Pasir Ris

  • Perform device bench testing including DC/HV/reliability testing and characterization.
  • Fine-tune devices to ensure on-time delivery and successful reliability qualification.
  • Solid semiconductor device physics and analysis skill, with a focus on bipolar and power devices. ...
Posted
12 days ago
Undisclosed

Malaysia

  • S.in Mechanical Engineering plus 5years,of relevant industry experience
  • Solid knowledge through academic coursework or experience required in Mechanical design
  • Proficiency in CAD software (e.g. SolidWorks, Autocad) ...
Posted
12 days ago
Undisclosed

Ulu Pandan

  • Prepare and follow up on quotations, proposals, and commercial negotiations
  • Work closely with cross-functional teams (engineering, product, supply chain) to deliver solutions
  • Manage opportunity pipelines via CRM and meet/exceed sales targets and KPIs ...
Posted
12 days ago
SGD2,000 - SGD2,000 每月

Singapore

  • Min Nitec in Engineering and relevant
  • Class 2B or 3 driving license required
  • Responsibilities ...
Posted
10 days ago
Undisclosed

Toa Payoh

  • Participate in continuous improvement activities and take preventive actions.
  • Share Lessons Learned from previous field issues; Provide upfront feedback by participating in design reviews to ensure product performance, reliability, and manufacturability issues are identified and risks mitigated. (DFMEAs)
  • Take part in ongoing optimization of the products and processes (performance, cost, technology) ...
Posted
13 days ago
Undisclosed

Toa Payoh

  • Participate in continuous improvement activities and take preventive actions.
  • Share Lessons Learned from previous field issues; Provide upfront feedback by participating in design reviews to ensure product performance, reliability, and manufacturability issues are identified and risks mitigated. (DFMEAs)
  • Take part in ongoing optimization of the products and processes (performance, cost, technology) ...
Posted
13 days ago
SGD5,500 - SGD5,500 每月

Singapore

  • Perform product design activity which includes translating customer requirements into product drawings and product specification, design analysis and verification, tolerance analysis, DFMEA, etc.
  • Ensure product designs are validated per customer requirements, respecting international industry standards.
  • Take Project Leadership role, define and reconcile technical DFM with Process Design team ...
Posted
13 days ago
SGD4,000 - SGD5,300 每月

Singapore

  • Working Hours: Monday to Friday, 8am to 5.30pm
  • Salary Package: Basic + Bonus (more than 1 month)
  • Responsible for the installation, commissioning, maintenance, and testing of high- and medium-voltage equipment. ...
Posted
2 days ago