Jobs
Companies
Forums
2,500+ Cnc Jobs - September 2026 - High Salaries
Showing 2,533 jobs results for
"cnc"
Never miss any updates for Cnc jobs
Manage Alert
Undisclosed
Singapore
- Perform quality control, follow reporting and record keeping procedures and report problems to supervisor.
- Comply with all safety and health regulations.
- Clean machinery and maintain cleanliness in work area. ...
Posted
15 days ago
MYR2,000 - MYR2,500 Per Month
Malaysia
- Set machine offsets and tool wear compensation
- Troubleshoot setup and machining issues
- Support machine operators during production ...
Posted
19 hours ago
SGD6,000 - SGD6,000 Per Month
Singapore
- Responsible for respective consumable spending, delivery metrics, capacity planning, risk assessment, Total Productive Maintenance (TPM), and Overall Equipment Efficiency (OEE).
- Involve in supporting and participating in Lean/Kaizen initiatives.
- Conduct routine cell and tool box meetings with effectively. ...
Posted
15 days ago
SGD6,000 - SGD6,000 Per Month
Singapore
- Responsible for respective consumable spending, delivery metrics, capacity planning, risk assessment, Total Productive Maintenance (TPM), and Overall Equipment Efficiency (OEE).
- Involve in supporting and participating in Lean/Kaizen initiatives.
- Conduct routine cell and tool box meetings with effectively. ...
Posted
15 days ago
SGD4,000 - SGD4,000 Per Month
Singapore
- In charge of performing internal audits to evaluate quality system, products, and processes
- In charge of performing vendors’ and on-site audits as required
- Drive down monthly Cost of Poor Quality/ scrap ...
Posted
15 days ago
SGD4,500 - SGD4,500 Per Month
Singapore
- In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
- Responsible for conducting pre-production pilot run and training for associates.
- Provide technical support to Production to achieve technical and quality requirements. ...
Posted
15 days ago
SGD2,800 - SGD2,800 Per Month
Singapore
- Inspection with wide variety of measuring devices, gages, optical equipment as well as develop quality procedures to ensure robust processes.
- Perform preventive maintenance of machines and ensure Work Health and Safety in all processes
- Support processes to deposit conductive (metal) films by Plating, PVD Sputtering and Vacuum Evaporation. ...
Posted
15 days ago
SGD2,800 - SGD2,800 Per Month
Singapore
- Maintain safe operation and handling of CNC machines at all times to prevent accidents and ensure workplace safety
- Minimum of NITEC or Diploma in an engineering related field.
- Able to interpret and read 3D feature drawings. ...
Posted
16 days ago
MYR2,000 - MYR3,000 Per Month
Malaysia
- Conduct dimensional inspection using measuring instruments such as vernier calipers, micrometers, height gauges, and other measuring tools
- Ensure machined parts meet the required dimensions, tolerances, and quality standards
- Read and interpret engineering drawings and basic GD&T ...
Posted
3 days ago
MYR1,700 - MYR2,200 Per Month
Malaysia
- Perform basic machine maintenance and troubleshooting
- Inspect finished parts to ensure they meet specifications
- Follow safety procedures and maintain a clean working environment ...
Posted
4 days ago
MYR2,800 - MYR3,800 Per Month
- Meal allowance
- Opportunities for promotion
- Parental leave ...
Posted
16 days ago
SGD6,000 - SGD6,000 Per Month
Singapore
- Responsible for respective consumable spending, delivery metrics, capacity planning, risk assessment, Total Productive Maintenance (TPM), and Overall Equipment Efficiency (OEE).
- Involve in supporting and participating in Lean/Kaizen initiatives.
- Conduct routine cell and tool box meetings with effectively. ...
Posted
2 days ago
SGD6,000 - SGD6,000 Per Month
Singapore
- Responsible for respective consumable spending, delivery metrics, capacity planning, risk assessment, Total Productive Maintenance (TPM), and Overall Equipment Efficiency (OEE).
- Involve in supporting and participating in Lean/Kaizen initiatives.
- Conduct routine cell and tool box meetings with effectively. ...
Posted
2 days ago
SGD4,000 - SGD4,000 Per Month
Singapore
- Perform routine maintenance and troubleshooting on CNC machines to ensure optimal performance.
- Inspect finished parts to verify conformance to specifications using precision measuring instruments.
- Collaborate with engineering and quality control teams to resolve production issues and improve processes. ...
Posted
2 days ago
SGD3,000 - SGD3,000 Per Month
Singapore
- Plan and assign daily jobs based on workload and priorities.
- Monitor job progress and update work status to ensure jobs are completed on time.
- Coordinate with the Workshop Manager and relevant teams on job requirements and priorities. ...
Posted
2 days ago
SGD3,000 - SGD3,000 Per Month
Singapore
- In charge of leading new product introduction (NPI), including feasibility studies, cost estimation, process simulation, and tooling and machining reviews.
- In charge of leading improvements in manufacturing plant cycle time, yield, and process stability through methodological principles, SAP data analysis, Statistical Process Control (SPC), and continuous improvement tools, supporting both new and existing engineering projects to optimize the production line.
- Responsible to liaise with customers’ engineering teams when required for technical clarification, drawing interpretation, and process qualification. ...
Posted
2 days ago
SGD6,000 - SGD6,000 Per Month
Singapore
- Responsible for respective consumable spending, delivery metrics, capacity planning, risk assessment, Total Productive Maintenance (TPM), and Overall Equipment Efficiency (OEE).
- Involve in supporting and participating in Lean/Kaizen initiatives.
- Conduct routine cell and tool box meetings with effectively. ...
Posted
2 days ago
FALCON AUTOMATION AND INTEGRATIONS PRIVATE LIMITED
MYR3,500 - MYR4,000 Per Month
Malaysia
- Perform first-piece and in-process inspections using calipers, angle gauges, and other measuring tools.
- Adjust machine parameters to maintain required dimensions, angles, and tolerances.
- Identify and troubleshoot bending defects such as springback, indentation, and interference. ...
Posted
5 days ago
MYR3,500 - MYR4,500 Per Month
Malaysia
- Responsible for the daily measurement tasks of OMM and CMM;2. Responsible for the calibration, maintenance, and management of measuring instruments and inspection equipment;3. Responsible for managing the inventory and reports of measuring instruments and inspection equipment, and reviewing the calibration/validation results in the reports;4. Responsible for the calibration status labeling of measuring instruments and inspection equipment.5. Conduct dimension measurements for inspection requests from various departments and preserve the inspection results in electronic archives;6. After completing the measurements, prepare a report with the corresponding dimensions;7. Daily maintenance, upkeep, and inspection of measurement room equipment;[9:45 AM]Familiarity with inspection equipment is required; experience with coating thickness gauges is preferred.
- Pay: RM3,500.00 - RM4,500.00 per month
- Benefits: ...
Posted
4 days ago
Undisclosed
Malaysia
- Documents actions by completing production and quality logs.
- Maintains safe operations by adhering to safety procedures and regulations
- Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs ...
Posted
17 days ago
SGD1,800 - SGD1,800 Per Month
Singapore
- Quality Control: Inspect finished workpieces using precision measuring tools such as calipers, micrometers, and gauges.
- Maintenance & Safety: Perform daily preventative maintenance, keep the work area clean, and adhere to workplace safety standards
- Experience: Minimum 3 to 5 years of hands-on experience in setting up and operating CNC lathe/turning machines ...
Posted
5 days ago
Undisclosed
- Documents actions by completing production and quality logs.
- Maintains safe operations by adhering to safety procedures and regulations
- Maintains equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs ...
Posted
17 days ago
MYR3,000 - MYR4,000 Per Month
- Diploma/Advanced Diploma (Preferred)
- CNC servicing : 2 years (Preferred)
- English (Preferred) ...
Posted
17 days ago
MYR1,800 - MYR2,500 Per Month
Malaysia
- Assist the supervisor to follow up on the master production schedule and work orders from time to time.
- Maternity leave
- Opportunities for promotion ...
Posted
17 days ago
Job searches related to “Cnc”
Browse Location:
More Location
Browse Company:
More Companies
Browse "cnc" Job By:
Browse "cnc" Job By:
More Industries