200+ 技术员 Jobs in Kulim - July 2026 - High Salaries
Showing 239 jobs results for
"技术员"
in Kulim
Never miss any updates for 技术员 jobs in Kulim
Manage Alert
Chat Available
You can chat with the employer only after applying for this job.
Mechanical Process Engineer (Mandarin Speaker)
MYR4,500 - MYR7,000 Per Month
- Collaborate with production, quality, and maintenance teams to optimize efficiency and yield
- Support equipment qualification, validation, and continuous improvement initiatives.
- Prepare process documentation, reports, and work instructions ...
Mechanical Engineering
Process Engineering
Skills Required
Mechanical Engineering
Process Engineering
Project Management
Problem-Solving
Data Analysis
+3
Posted
2 days ago
Chat Available
You can chat with the employer only after applying for this job.
MYR4,000 - MYR5,000 Per Month
- · Conduct root cause analysis and implement corrective and preventive actions (CAPA)
- · Improve yield, reduce defects, downtime, and material wastage
- · Develop and maintain process documentation such as SOP, WI, PFMEA, and process parameters ...
Posted
15 days ago
Undisclosed
- Assist internal maintenance technicians when PM activities completed.
- Diagnose and replace worn parts in PM equipment- “Report and Escalate abnormalities
- Candidate must possess a minimum Diploma in Engineering discipline, with considerable hands-on working experience in facilities engineering. ...
Posted
a day ago
Undisclosed
- Creating training materials in accordance with Air Liquide Group Standard requirements for the new production site
- Updating all Process and Maintenance P&IDs and SOPs to reflect current amendments for existing production units and bulk installations
- Supporting the implementation of Intelex for the Northern Operation Team's qualification process by consolidating the training matrix ...
Posted
14 days ago
Undisclosed
- Execute stress test protocols according to established procedures and specifications
- Monitor test progress and perform basic platform debugging and troubleshooting when issues arise
- Report any quality incidents observed during execution into Process Trouble Report (PTR) system to ensure continuous improvement in lab processes. ...
Posted
9 hours ago
Undisclosed
- Candidates should possess Manufacturing Engineering knowledge to support production operations and continuous improvement.
- Candidates should have attention to detail, good documentation practices, and familiarity with quality and safety standards in manufacturing.
- Candidates should have effective communication skills and the ability to work collaboratively with engineering and operations teams. ...
Posted
5 days ago
Undisclosed
- Create documentation for working instructions, quality alert, & troubleshooting guides for vision fine tunings
- Assist ME in trouble shooting process issues contributing to Low 1st Pass yield and reporting in the shift
- Support manufacturing process development and automation projects, including the design and development of new jigs and fixtures. ...
Posted
9 days ago
Undisclosed
- Support the implementation of improvement plans stemming from internal and external audits, as well as Root Cause Analyses (RCA).
- Identify, manage, and ensure proper storage of critical spare parts, while maintaining accurate tool inventories and consumable monitoring systems.
- Manage contractors by overseeing work delegation, cost control, competency assessments, and Health, Safety, and Environment (HSE) compliance. ...
Posted
a month ago
Undisclosed
- Assist internal maintenance technicians when PM activities completed.
- Diagnose and replace worn parts in PM equipment- “Report and Escalate abnormalities
- Candidate must possess a minimum Diploma in Engineering discipline, with considerable hands-on working experience in facilities engineering. ...
Posted
22 days ago
Undisclosed
- Communicates vital information to oncoming shift and all affected departments.
- Logs process and press changes, and fills out all other required paper works in a timely manner
- Adhere to all safety procedures including wearing all required protective equipments ...
Posted
2 days ago
MYR2,000 - MYR2,500 Per Month
- Perform X-ray imaging inspection on failure sample to detect package defect.
- Using sample preparation/ material analysis tools such as Auto lid shear, Mechanical Polisher, Micro Abrasion, Chemical Etching, HAAS, X-prep, SEM/EDX, FTIR, FIB, IRLC etc. to reveal the defect or failure.
- Perform dimension measurement task and visual inspection using Microscope. ...
Posted
2 days ago
MYR1,800 - MYR1,800 Per Month
- Perform advanced rebuild/retrofits of mechanical equipment and advanced industrial fabrication functions as needed.
- Perform basic mechanical maintenance functions and basic mechanical fabrication functions as needed.
- To be available to attend for emergency and urgent circumstantial situation. ...
Posted
9 hours ago
MYR2,000 - MYR2,500 Per Month
- Monitor manufacturing processes to ensure compliance with approved work instructions, control plans, process parameters, and quality requirements.
- Support First Article Inspection (FAI), first-piece verification, production line setup validation, and production changeover inspections.
- Identify quality abnormalities during inspection activities and promptly report nonconformities to the Quality Engineer or Supervisor for corrective action. ...
Posted
9 hours ago
Undisclosed
- Participate actively in company initiatives such as training sessions and continuous improvement projects.
- Comply with all workplace safety guidelines and ensure proper adherence at all times.
- Maintain a clean, organized, and safe working environment. What We Seek: ...
Posted
5 days ago
Undisclosed
- Verify that daily rounds are recorded. Determine corrective action to be taken in the event of abnormal parameters and ensure that corrective action is completed.
- Monitor and understand correct liquid bulk delivery procedures for each product on site.
- Assist bulk gas and tube trailer offload and monitoring. ...
Posted
5 days ago
Undisclosed
- Conduct continuous improvement project to improve / optimize plastic injection molding process to meet customer expectation.
- Maintain a clean and safe work environment. Keep work area clean of debris.
- Responsible to attend technical issue in production. Ensure all products in production comply with all Quality requirements and handled according to established procedures. Work with operation team to ensure quality product produced for customer shipment on time. ...
Posted
7 days ago
Undisclosed
- Led the CIP project focused on boosting productivity and reducing scrap to achieve plant KPIs.
- Periodically review the product process cycle time during cost roll revisions to accurately reflect profit and loss.
- Lead FMEA development and updates for assigned manufacturing processes to ensure accurate risk evaluation and mitigation. ...
Posted
7 days ago
MYR1,800 - MYR2,000 Per Month
- Writing up reports, compliance to safety regulations, perform preventative maintenance as required from time to time.
- Repairing or replacing faulty equipment.
- Keeping abreast of advancements in your field and attending workshops/training as required. ...
Posted
a month ago
Undisclosed
- Execute stress test protocols according to established procedures and specifications
- Monitor test progress and perform basic platform debugging and troubleshooting when issues arise
- Report any quality incidents observed during execution into Process Trouble Report (PTR) system to ensure continuous improvement in lab processes. ...
Posted
22 days ago
Undisclosed
- Monitor manufacturing processes to ensure compliance with work instructions, control plans, process parameters, and quality requirements.
- Support First Article Inspection (FAI), first-piece verification, production line setup validation, and production changeover inspections.
- Identify, document, and report nonconforming products while supporting containment actions and corrective actions. ...
Posted
6 days ago
Browse Company:
More Companies
Browse "技术员" Job By:
Browse "技术员" Job By: