200+ Process Technician Jobs in Pulau Pinang - June 2026 - High Salaries
search.result_querys_job
"process technician"
text.in Pulau Pinang
job_alert.title_toggle_job
job_alert.activate_job_alert
job_alert.job "process technician"
job_alert.in "Pulau Pinang"
job_alert.btn_manage_alert
Undisclosed
Malaysia
- • Execute tests, evaluate results against defined criteria, and deliver complete documentation and final reports using state-of-the-art test methods.
- • The Execution Engineer leads project development and technical realization activities for new product development.
- • The role ensures that product meets customer, regulatory, and technical requirements while complying with Bosch processes and the Product Innovation Framework (PIF). ...
Posted
a month ago
Undisclosed
- Create, review, and coordinate Engineering Change Orders implementation with the CM partner and make process improvement recommendations.
- Acts as a primary interface with the Teradyne NPI Ops team / Engineering team during the release of a new assemblies or revisions to assemblies already in use.
- To work with the CM partner to drive operation improvement. ...
Posted
23 days ago
MYR4,500 - MYR6,000 Per Month
- Parental leave
- Professional development
- Job Responsibilities ...
Posted
17 days ago
Undisclosed
- Customer / field returns
- Perform basic electrical and physical failure analysis following standard operating procedures (SOPs).
- Prepare samples for analysis, including: ...
Posted
a month ago
Undisclosed
- Create, review, and coordinate Engineering Change Orders implementation with the CM partner and make process improvement recommendations.
- Acts as a primary interface with the Teradyne NPI Ops team / Engineering team during the release of a new assemblies or revisions to assemblies already in use.
- To work with the CM partner to drive operation improvement. ...
Posted
25 days ago
Undisclosed
George Town
- Establish best practices, routines, and innovative solutions to improve productivity and output quality.
- Perform process simulations to validate improvements.
- Manage project cost and schedule constraints. ...
Posted
a month ago
Undisclosed
- Create, review, and coordinate Engineering Change Orders implementation with the CM partner and make process improvement recommendations.
- Acts as a primary interface with the Teradyne NPI Ops team / Engineering team during the release of a new assemblies or revisions to assemblies already in use.
- To work with the CM partner to drive operation improvement. ...
Posted
a month ago
Undisclosed
- Create and maintain wave and reflow soldering profiles.
- Ensure that process parameters are within acceptable tolerances for products and components, and result in solder quality that meets IPC-610B requirements (or other applicable standard).
- Design and / or procure production tooling, including stencils, vacuum plates, wave solder pallets and product-specific fixtures and jigs. ...
Posted
12 days ago
Undisclosed
Malaysia
- Support chip structure optimization through detailed FA results and recommendations.
- Evaluate package reliability and robustness in response to fab process changes.
- Support package evaluation and qualification for NAND and ASIC technologies. ...
Posted
a month ago
Undisclosed
- Follow daily production issue, lead the team on increasing yield, improving product quality, reducing the manufacturing cost.
- Follow the customer quality feedback, prepare corrective action, and monitor the implementation.
- Establish product quality team to improve product performance on RTY DPU and OOB DPPM. ...
Posted
a month ago
Undisclosed
Malaysia
- Support chip structure optimization through detailed FA results and recommendations.
- Evaluate package reliability and robustness in response to fab process changes.
- Support package evaluation and qualification for NAND and ASIC technologies. ...
Posted
a month ago
Undisclosed
Malaysia
- Support energy management by taking measures to ensure that all systems are operating in the most efficient manner.
- Inspect new or existing installations for compliance with building codes and safety regulations.
- Apply in-depth knowledge of standard principles and techniques/procedures to accomplish complex assignments and provide innovative solutions. ...
Posted
25 days ago
Undisclosed
Malaysia
- Design and conduct experiments to troubleshoot process issues and validate improvements.
- Collaborate with cross-functional teams to drive continuous improvement projects.
- Monitor and analyze process data to identify trends and opportunities for enhancement. ...
Posted
a month ago
Undisclosed
Malaysia
- Knowledgeable in the Prober, Tester, probe card management and machine troubleshooting with any additional wafer equipment knowledge.
- Bachelor of Engineering (Hons) in Electronics,Computer Science and Information Technology.
- Able to present comfortablyina big group of employees. ...
Posted
a month ago
Undisclosed
- Create and maintain wave and reflow soldering profiles.
- Ensure that process parameters are within acceptable tolerances for products and components, and result in solder quality that meets IPC-610B requirements (or other applicable standard).
- Design and / or procure production tooling, including stencils, vacuum plates, wave solder pallets and product-specific fixtures and jigs. ...
Posted
a month ago
Undisclosed
Prai
- Strive to implement new manufacturing technologies to provide improved process and tolerance control
- Support Product Development in the optimization designs (DFM) and piece parts for manufacturability; realizes sample tooling, product samples and prototypes.
- Design, develop, and qualify tooling and processes to meet TE Data and Devices quality and production standards. ...
Posted
a day ago
Undisclosed
- Performs preventive maintenance at specified intervals and schedules.
- Performs calibrations and re-qualifications on equipment at specified intervals and schedules.
- Assists process technicians and engineers with the installation and removal of process equipment. ...
Posted
2 days ago
Undisclosed
- Ensure designs adhere to safety regulations and participate in hazard studies.
- Perform FAT and SAT commission new equipment, manage vendor documents, and ensure projects stay within budget.
- Prepare technical reports, data sheets, and maintenance procedures. ...
Posted
4 days ago
Undisclosed
Prai
- Replace worn or degraded parts proactively to prevent failures and extend equipment life.
- Corrective maintenance
- Diagnose and repair equipment breakdowns promptly using data and structured troubleshooting. ...
Posted
12 days ago
Undisclosed
Prai
- Participate in product quality planning and control processes based on customer specifications and requirements initiated by customer quality issues.
- Inform the quality management team regarding customer feedback and expectations on product quality.
- Prepare and update all necessary quality reports and procedures as required by customers and internal procedures. ...
Posted
13 days ago
Undisclosed
- Use advanced measurement tools, techniques, and test equipment and be able to understand and analyze results.
- Create and review qualification plans for inner company product transfers (Process Review, Test Plan Development, PCN, etc.)
- Serve as a training resource for above mentioned measurement and test equipment, ensuring respective personnel understand their operation. ...
Posted
15 days ago
Undisclosed
- Collaborate with other disciplines and project team on design and system interfaces;
- Ensure design is delivered in accordance with master schedule and within budget;
- Responsible to deliver committed deliverables at each design stage; ...
Posted
16 days ago
MYR5,000 - MYR7,000 Per Month
- Manufacturing Improvement & Yield Enhancement: Drive continuous improvement initiatives to improve production yield, efficiency, and cost effectiveness, while developing best practices and innovative solutions to reduce waste.
- Training, SOP Development & Cross-Functional Collaboration: Provide technical guidance and training to production teams, establish system procedures and SOPs, and work closely with Quality and Production teams to resolve customer complaints effectively.
- Safety, Compliance & Process Control Assurance: Ensure critical processes and control points are properly controlled, maintain a safe and healthy workplace, and ensure compliance with company policies and safety procedures. ...
Posted
16 days ago
Undisclosed
Malaysia
- Bench testing and debugging of reliability test circuits / boards verification.
- Operation of measurement equipment such as curve tracer, oscilloscope and multimeters for supporting in-house calibration activities.
- Know-how in reliability stress testing eg. Environmental, Electrical/ Functional, and acoustics stress testing. ...
Posted
6 days ago
Undisclosed
George Town
- · Design and develop AI / RPA solutions for:
- o Data entry and reporting
- o Recipe download / system updates ...
Posted
2 days ago
Undisclosed
George Town
- Lead supplier selection and qualification for cost savings and capacity expansion and provide alternative manufacturing component assembly strategies.
- Ensure suppliers can support future designs, quality standards, and capacity needs. Identify gaps in supplier capabilities and create improvement plans.
- Bachelor’s degree in field with 8+ years of related work experience OR Master’s degree in field with 6+ years of related work experience ...
Posted
9 days ago
Undisclosed
- Collaborate with production and Research and Development (R&D) to promote the simultaneous engineering process for combined product and process development with the aim of generating manufacturable new products in accordance with the Center of Excellence (CoE) and division's needs.
- Assist in conducting early evaluations of manufacturing technology suppliers in Asia Pacific (APAC) region which would enhance B. Braun manufacturing capabilities, especially in the area of innovative automation technologies built around the medical product manufacturing and assembly processes.
- For more senior position level, shall provide training concepts and execution recommendations for technically skilled workers, to be implemented by a technical training center. ...
Posted
21 days ago
Undisclosed
- Pro-active collaboration in the global CoC and the related sub-CoC group (Center of Competence). Develop suitable strategies to execute governance over the core process within the area of regional responsibility defined for the BTC-AP BMI.
- Collaborate with R&D to promote the simultaneous engineering process for combined product and process development with the aim of generating manufacturable new products in accordance with the CoE’s and division’s needs.
- Conduct early evaluations of manufacturing technology suppliers in APAC region which would enhance B. Braun manufacturing capabilities, especially in the area of innovative automation technologies around the packaging processes. Provide training concepts and execution recommendations for technically skilled workers, to be implemented by a technical training center. ...
Posted
21 days ago
Undisclosed
George Town
- Lead supplier selection and qualification for cost savings and capacity expansion and provide alternative manufacturing component assembly strategies.
- Ensure suppliers can support future designs, quality standards, and capacity needs. Identify gaps in supplier capabilities and create improvement plans.
- Bachelor’s degree in field with 8+ years of related work experience OR Master’s degree in field with 6+ years of related work experience ...
Posted
13 days ago
job_search.browse_location:
job_search.more_location
job_search.browse_company:
job_search.more_company
job_search.browse_job_by_title:
job_search.browse_job_by_title: