200+ Process Technician Jobs in Pulau Pinang - September 2026 - High Salaries

Showing 272 jobs results for "process technician" in Pulau Pinang
Never miss any updates for Process Technician jobs in Pulau Pinang
Undisclosed
  • Verify machine settings and ensure calibration is correct before starting operations.
  • Adjust machine parameters as needed to maintain optimal performance.
  • Process Control and Documentation: ...
Posted
a month ago
Undisclosed
  • Verify machine settings and ensure calibration is correct before starting operations.
  • Adjust machine parameters as needed to maintain optimal performance.
  • Process Control and Documentation: ...
Posted
a month ago
MYR4,500 - MYR5,000 Per Month
Fresh Graduates
  • Collaborate with cross-functional teams, including quality control and maintenance, to resolve production-related problems and ensure continuous improvement.
  • Gain hands-on experience with plastic injection molding processes and equipment, including injection molding machines and associated tooling.
  • Contribute to data collection and analysis related to production output, cycle times, and defect rates to identify areas for optimization. ...
problem-solving lean manufacturing
+8
Posted
5 days ago
MYR4,500 - MYR6,000 Per Month
  • Process Quality Supervision: Monitor production operators to ensure standardized operations and compliance with quality requirements.
  • Inspection Management & Data Reporting: Maintain daily, weekly, and monthly quality inspection data, including pass rate, defect rate, and abnormality rate, and prepare quality reports.
  • Quality Improvement: Participate in quality improvement activities and work with Process Engineering and QA teams to reduce defects and recurring quality issues. ...
Quality Control Process Engineering
+1

Be an early applicant!

Posted
4 days ago
High Opportunity
Undisclosed
  • Maintaining routing in SAP system
  • Reviewing and preparing digital harness board drawing
  • Reviewing and submitting Technical Queries (TQ) ...
Posted
3 months ago
Undisclosed
  • Maintaining routing in SAP system
  • Reviewing and preparing digital harness board drawing
  • Reviewing and submitting Technical Queries (TQ) ...
Posted
3 months ago
MYR3,000 - MYR4,000 Per Month
Fresh Graduates
  • Responsible, able to work independently, and good communication skills
  • Minimum SPM / Diploma or equivalent
  • Experience in site supervision or waste management is an advantage ...
Site Supervision Waste Management
+3
Posted
2 months ago
MYR3,500 - MYR5,000 Per Month
Fresh Graduates
  • Conduct feasibility study and risk assessment
  • Provide technical support to Sales and Production teams
  • Assist in customer technical discussions ...
Posted
a month ago
MYR6,000 - MYR8,000 Per Month

George Town, Pulau Pinang

  • Use OpenAI Codex or similar AI coding tools to accelerate development, debugging, refactoring, and documentation.
  • Review and validate AI-generated code before use.
  • Use GitHub for version control, branches, commits, pull requests, code reviews, and change tracking. ...
HMI SCADA
+2
Posted
a month ago
MYR2,000 - MYR2,500 Per Month
  • Exhibits effective communication skills, with the ability to engage in cross-team discussions and provide feedback on any questionable measurements.
  • Demonstrates sound judgment in determining whether the provided information is sufficient to proceed with approval.
  • Maintains a high level of attention to detail and accuracy when validating and matching key information within the recipe. ...
Posted
2 months ago

Iotronix Technologies Sdn Bhd

  • Support daily production operations and sustain process performance.
  • Drive yield improvement through process/equipment updates, retrofits, and advanced manufacturing technologies.
  • Collaborate with Line Supervisors, Process Engineers, and Machine Support teams to resolve issues and enhance line performance. ...
Posted
13 days ago

OSADI COMMERCIAL SUPPLIES SDN BHD

Malaysia

  • Collect and document data for process or equipment faults.
  • Work with engineers on experiments, process improvements, and qualifications.
  • Follow SOPs and maintain safety, housekeeping, and environmental compliance. ...
Posted
5 days ago

Eng Teknologi Sdn Bhd

  • malfunctions.
  • Support continuous improvement activities to enhance productivity, quality,
  • and safety. ...
Posted
25 days ago
  • Support the design of experiments (DOE) and process trials
  • Perform process qualification runs and collect data for engineering analysis
  • Analyze particles and defect inspection data ...
Posted
22 days ago
  • Fabricates and maintains manufacturing jigs / fixtures.
  • Compiles and analyzes statistical data for critical processes.
  • Creates profile boards and sets up profile parameters for wave soldering and re-flow machines. ...
Posted
a month ago

Malaysia

  • Candidates should possess Preventive Maintenance skills to assist in scheduled maintenance, basic equipment care, and reporting of potential mechanical or electrical problems.
  • Candidates should possess Training skills to share process knowledge, support onboarding of new team members, and promote adherence to safety and operational procedures.
  • Relevant technical or vocational qualification in engineering, manufacturing, or a related field is preferred. ...
Posted
24 days ago

Malaysia

  • Apply sound engineering knowledge in the trouble shooting product failure, produce failure analysis report and perform corrective action.
  • Provide technical support to value stream team in order to achieve business and quality indices.
  • Candidate must possess at least a Diploma, in Mechanical / Manufacturing engineering with 3~6 month experience. ...
Posted
5 days ago
  • Apply sound engineering knowledge in the trouble shooting product failure, produce failure analysis report and perform corrective action.
  • Provide technical support to value stream team in order to achieve business and quality indices.
  • Candidate must possess at least a Diploma, in Mechanical / Manufacturing engineering with 3~6 month experience. ...
Posted
6 days ago
  • Monitoring on hold lot disposition and provide communication with engineer in order to not impact daily assembly output.
  • Maintain all housekeeping / 5s engineering station and tooling’s, to ensure compliance to safety rules.
  • Monitor all processes, resolve all products issues and coordinate with production and equipment to reduce downtime and getting better product quality. ...
Posted
17 days ago
  • Successfully executes responsibilities independently in accordance with good manufacturing practices and Plexus' Manufacturing Processes AND provide support to direct production line operators as it applies to their role.
  • Comprehensive Understanding of Equipment / Process control / Safety / Risk Awareness / setup awareness / operation of, as it applies to their role.
  • Associate’s Degree with 2 or more years of related experience is preferred. An equivalent combination of education and/or experience will be considered. ...
Posted
25 days ago
  • Successfully executes responsibilities under supervision in accordance with good manufacturing practices and Plexus' Manufacturing Processes AND provide support to direct production line operators as it applies to their role.
  • Basic Understanding of Equipment / Process control / Safety / Risk Awareness / setup awareness / operation of, as it applies to their role.
  • Associate’s Degree with 1 or more years of related experience is preferred. An equivalent combination of education and/or experience will be considered. ...
Posted
25 days ago

Prai

  • Troubleshoot basic process, machine and production issues and escalate more complex problems to the Engineer.
  • Assist Process Engineers in process improvement, engineering evaluation and troubleshooting activities.
  • Support investigation of process abnormalities, defects and production issues. ...
Posted
25 days ago
Posted
a month ago
  • Perform equipment setup, product changeover, recipe verification, and parameter checks.
  • Troubleshoot process and equipment abnormalities and escalate issues to Engineers when required.
  • Perform basic equipment adjustments and support preventive maintenance activities. ...
Posted
15 days ago

Prai

  • Free parking
  • Health insurance
  • Maternity leave ...
Posted
24 days ago
  • Perform daily,weekly and monthly PM for all machines supported by PSG.
  • Trouble shoot and repair Lux-O lamp,UV lamp and cooling fan from production.
  • Buyoff all new incoming pallets. ...
Posted
17 days ago

WELLSENTECH SDN BHD

  • - Update and maintain latest production control drawing (PCD) and document revision.
  • > Highlight critical note.
  • > Create before finishings' tolerance. ...
Posted
3 days ago

Malaysia

  • Actively engage in problem solving activities related to assembly processes, implement corrective actions and effectively communicate those actions to all required personnel.
  • Actively involve in PFMEA and DFMEA sessions and discussions of NPI new development products.
  • Be the subject matter expert in assembly process quality controls to derive standards, sustain them across all product lines and deliver the knowledge to assemblers, supervisors and engineers. ...
Posted
3 days ago

George Town

  • Review product development requirements for compatibility with processing methods to determine costs and schedules
  • Integrates equipment and material capabilities to meet process module and technology specifications
  • Drive CIP (Continuous improvement plans) to improve process performance indices ...
Posted
8 days ago