2,500+ Process Engineering Jobs - July 2026 - High Salaries

Showing 2,501 jobs results for "process engineering"
Never miss any updates for Process Engineering jobs
Undisclosed

Singapore

  • Provide engineering support to meet targets for output, product quality, efficiency, yield, cycle time, and safety.
  • Perform data analysis using statistical tools, summarize findings, and present results to relevant stakeholders for alignment, action, and strategic decision-making.
  • Drive and facilitate meetings to mitigate yield loss, create action roadmaps, and implement continuous improvement strategies with cross-functional teams. ...
Posted
6 days ago
Undisclosed

Singapore

  • Design tooling, fixtures and gauges.
  • Develop special processes such as Heat Treatment, Brazing, EDM, Shot peening and Welding etc
  • Conduct pre-production pilot run and training for associates. ...
Posted
6 days ago
Undisclosed

Singapore

  • Design tooling, fixtures and gauges.
  • Develop special processes such as Heat Treatment, Brazing, EDM, Shot peening and Welding etc
  • Conduct pre-production pilot run and training for associates. ...
Posted
6 days ago
SGD2,200 - SGD2,200 Per Month

Jurong West

Posted
19 days ago
SGD16,000 - SGD16,000 Per Month

Singapore

  • Drive technology transfer from R&D to manufacturing with optimised process windows.
  • Prepare technical documentation, reports, and presentations for internal and external stakeholders.
  • Bachelor’s, Master’s, or PhD in Electrical Engineering, Physics, Material Science, or related field ...
Posted
6 days ago
SGD5,000 - SGD5,000 Per Month

Singapore

  • Design, develop, and improve tooling, fixtures, work instructions, and manufacturing methods to enhance productivity and product quality.
  • Monitor manufacturing performance through process audits, statistical analysis, DOE, SPC, and capability studies while ensuring compliance with quality standards.
  • Support production planning by evaluating manufacturing capacity, labour utilization, material consumption, and equipment requirements. ...
Posted
6 days ago
SGD4,000 - SGD4,000 Per Month

Singapore

  • Support mold/tooling trials and process validations (IQ, OQ, PQ) to ensure reliable production processes.
  • Drive continuous improvement initiatives to improve OEE, reduce scrap and cycle time, and enhance operational efficiency.
  • Manage Engineering Change Notifications (ECN), including impact assessment, validation, and implementation. ...
Posted
6 days ago
Undisclosed
  • Prepare Test wafer and recycle.
  • Minimum Diploma in any Engineering field or science or Mathematic.
  • Experience working in shift and cleanroom environment. ...
Posted
6 days ago

Seatrium

Undisclosed

Singapore

  • Involves in electrical hot work fitting, cable termination, cable continuity check, megger test and Atex inspection
  • Creates work package by area or by subsystem
  • Plans resources manpower, materials, facilities and P6 scheduling ...
Posted
20 days ago
Undisclosed
  • Prepare Test wafer and recycle.
  • Minimum Diploma in any Engineering field or science or Mathematic.
  • Experience working in shift and cleanroom environment. ...
Posted
6 days ago
Undisclosed
  • Ability to interpret engineering drawings, technical specifications and manufacturing documentation.
  • Strong analytical, problem-solving, communication, and interpersonal skills, with the ability to work effectively in a cross-functional team.
  • Review and evaluate products, samples, engineering drawings, and specification requirements, and conduct feasibility studies on manufacturing technologies. ...
Posted
7 days ago
SGD3,000 - SGD4,500 Per Month

Anson

  • Lead & Oversee: Manage a team of Production Technicians for smooth, safe operations.
  • Support Process Engineering: Assist in optimizing operations and driving cost-efficiency.
  • Troubleshoot & Resolve: Quickly address plant and equipment issues with effective solutions. ...
Posted
20 days ago
Undisclosed

Singapore

  • Interface with other organizations such as Sourcing, RVS, global Engineering, MPE, VE and Systems to drive productivity savings.
  • Deliver processes to meet service programs, repair & new unit fulfillment and NPI initiatives, for both CS and Transactional markets.
  • Utilize lean-manufacturing values and participate in action workouts to improve process capability, reduce overall costs, and increase capacity. ...
Posted
7 days ago

Manpower Staffing Services (Malaysia) Sdn Bhd

SGD5,500 - SGD6,500 Per Month

Singapore

  • Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
  • Develop, implement and monitor robust preventive measures for processing issues.
  • Play a pro-active role in ensuring the site safety and quality standards are adhered to. ...
Posted
20 days ago
Undisclosed
  • Prepare Test wafer and recycle.
  • Minimum Diploma in any Engineering field or science or Mathematic.
  • Experience working in shift and cleanroom environment. ...
Posted
7 days ago

VisionPower Semiconductor Manufacturing Company (VSMC)

Undisclosed

Singapore

  • Assist to conduct experiments, analyse complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
  • Support to analyze production anomalies and maintaining/improving statistical process control (SPC) methods to establish and uphold robust manufacturing processes.
  • Operate under rotating shifts (day/night), including weekends and holidays, in a 24/7 fab environment. ...
Posted
7 days ago

ST Engineering

Undisclosed

Singapore

  • Undertake technical discussions with OEMs and understand broad vehicle engineering principles and apply them to bus design, testing and commissioning activities
  • Work independently with vendors and suppliers on resolving quality findings
  • Able to fulfill contract deliverables to make sure buses are registered and handed over to customer timely ...
Posted
20 days ago
SGD3,000 - SGD3,000 Per Month

Singapore

  • Working Hours: 5 days (Mon-Fri: 8am-5.30pm)
  • Salary Package: Basic $3,000 – $3,800 per month + AWS + VB
  • Duration: Permanent ...
Posted
20 days ago

Manpower Staffing Services (Malaysia) Sdn Bhd

SGD3,500 - SGD5,500 Per Month

Singapore

  • Perform start up, routine operations and shutdown of plant auxiliary equipment such as DIW plant, Scrubber system, Emergency Vent system, etc.
  • Perform panel operation, monitor process trend and alarm using DCS Delta V control system.
  • Ensure proper communication and handling over of shift duties. ...
Posted
19 days ago
Undisclosed

Singapore

  • Escalate issues appropriately per PMP requirements.
  • Conduct basic data queries and analysis to provide relevant information and insights for engineering teams.
  • Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintainstable and controlled operations. ...
Posted
20 days ago

Systems On Silicon Manufacturing Company Pte Ltd (SSMC)

Undisclosed

Singapore

  • Perform Shift duties to support production
  • Implement projects to upkeep process capabilities and reliabilities
  • Troubleshoot out-of-control situations and process issues and put corrective actions in place ...
Posted
7 days ago

Enggsol Pte Ltd

SGD4,000 - SGD65,000 Per Month

Singapore

  • Willingness to adopt new technologies, including AI, machine learning, and automation tools
  • Strong foundation in electronics engineering, IT, or digital and network engineering principles
  • Proficiency in networking concepts and digital services ...
Posted
20 days ago

UMS PTE. LTD.

SGD5,000 - SGD5,000 Per Month

Singapore

  • Generate 3D drawing for drawings with not clear and hidden dimensional information
  • Create drawing for those parts need fixture for production
  • Create Bill of Materials (BOM) and Routing for job travelers ...
Posted
20 days ago

CCECC SINGAPORE PTE LTD

SGD3,800 - SGD3,800 Per Month

Singapore

  • Supervise and monitor construction works to ensure compliance with contract specifications, Bills of Quantities (BOQ), approved drawings, quality standards, Environmental, Safety & Health (ESH) requirements, and contract documents.
  • Coordinate and liaise with Clients, Consultants, Authorities, Subcontractors, and Suppliers on project matters and technical issues.
  • Provide technical support and solutions to resolve design and site-related issues efficiently. ...
Posted
20 days ago
SGD4,000 - SGD6,000 Per Month

Central

  • Responsible for FA Inspection of casting and machining services
  • In Charge of managing the foundries which include quality and delivery performance
  • In charge of handling the non-conformance parts follow up ...
Posted
7 days ago
SGD4,000 - SGD6,000 Per Month

Central

  • Responsible for FA Inspection of casting and machining services
  • In Charge of managing the foundries which include quality and delivery performance
  • In charge of handling the non-conformance parts follow up ...
Posted
7 days ago
SGD4,500 - SGD6,500 Per Month

Central

  • In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
  • Responsible for conducting pre-production pilot run and training for associates.
  • Provide technical support to Production to achieve technical and quality requirements. ...
Posted
7 days ago
SGD4,500 - SGD6,500 Per Month

Central

  • In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
  • Responsible for conducting pre-production pilot run and training for associates.
  • Provide technical support to Production to achieve technical and quality requirements. ...
Posted
7 days ago
SGD6,000 - SGD10,000 Per Month

Central

  • Collaborate with stakeholders to enhance productivity.
  • Lead Continuous Improvement (CI) projects within the business, including training, coaching, guiding, and delivering outcomes.
  • Stay up to date with developments in management practices and process optimization ...
Posted
7 days ago
Undisclosed

Singapore, Singapore

  • Supporting the global logistics organisation and its stakeholders (product management, IT, etc.), e.g. with availability of tools & jigs for customising process and preparation of workstations
  • Completed basic commercial/logistics training with several years of professional and project experience in Supply Chain/Logistics
  • Process and target-oriented way of working; analytical, structured and service-oriented way of thinking ...
Posted
20 days ago