2,900+ Process Engineer Jobs in Malaysia | Job Vacancies | September 2026 | Ricebowl

Showing 2,932 jobs results for "process engineer"
Never miss any updates for Process Engineer jobs

Singapore

  • · Observes all safety standards. Maintains a secure, safe, clean and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
  • · Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair or software installs.
  • · Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes and involved in test. ...
Posted
10 days ago

Jurong

  • Inspects and maintains house-keeping of his assigned area for clean and safe working conditions as well as ensuring that personal protection equipment and safety equipment are maintained ready for use
  • Perform plant trouble shooting using appropriate problem- solving tool to minimize plant stoppages and safety or quality incidents
  • NITEC, Higher NITEC or Diploma in Chemical Process / Technology / Engineering related ...
Posted
10 days ago

Singapore

  • Comply with all Environment, Health and Safety (EHS) requirements and promptly report any unsafe conditions or practices.
  • Support continuous improvement initiatives within the workshop.
  • Carry out other duties as assigned. ...
Posted
10 days ago

Singapore

Posted
10 days ago

Singapore

  • Ensure workplace safety by proper asset upkeep, supporting function testing on safeguarding system and proper control on work activities in the plant.
  • Participate in plant shutdown & start-up and process unit troubleshooting work activities.
  • Diploma or NITEC in any Engineering/Science discipline OR ...
Posted
10 days ago

Singapore

  • Working location: Jurong Island (Company transport provided)
  • 12 Hours Rotating Shift
  • Perform laboratory testing and analyze in-process samples using approved instruments and equipment. ...
Posted
10 days ago

Singapore

  • · Monitor utilities usage to ensure normal usage and no leakages
  • · Operate and check treatment plant to ensure with stipulated Trade Effluent discharge limit.
  • · Maintaining accurate records, adjustments, and repairs performed on the treatment plant and production ...
Posted
10 days ago

Singapore

  • Perform post-process disposition, including geometry (Geo) and HOSPC evaluations.
  • Initiate containment and corrective actions for process abnormalities.
  • Support operations with setup verification and process compliance. ...
Posted
10 days ago

Jurong

  • Perform routine preventative maintenance activities
  • Ensure all maintenance activities are carried out safely, cost effectively and to a very high quality
  • Assist Mechanical Technicians in disassembling and re-assembling activities associated with equipment cleanouts to allow product changeovers ...
Posted
10 days ago

DIC Epoxy (Malaysia) Sdn Bhd

  • Plant operation, monitoring and recording (with DCS, panel instrument in the control room).
  • Plant operation, monitoring and recording (Plant).
  • Patrol in the plant. ...
Posted
10 days ago
  • Experience in steel, metal fabrication, packaging or similar manufacturing industries will be an advantage.
  • Good understanding of production processes, process control and problem-solving techniques.
  • Familiarity with RCA, CAPA, GMP, SPC and continuous improvement is an advantage. ...
Posted
25 days ago

Singapore

  • Manage process validations (IQ, OQ, PQ), tooling trials, and Engineering Change Notifications (ECN) to ensure smooth implementation of product or process changes.
  • Drive continuous improvement initiatives to enhance OEE, optimize cycle time, and improve cost efficiency through lean and automation practices.
  • Collaborate with cross-functional teams, suppliers, and customers on technical clarifications, process improvements, and compliance with quality and regulatory standards (e.g., ISO 13485, FDA QSR). ...
Posted
25 days ago

Singapore

  • Chemical Industry
  • Assist the ESH Section Manager in implementing ESH programs, ensuring compliance with environmental, safety and health regulations, and maintaining the Safety & Health Management System (SHMS).
  • Coordinate quotations, evaluate product specifications, arrange service and delivery schedules, liaise with suppliers, and communicate with internal stakeholders to support ESH operations. ...
Posted
25 days ago

Tuas

  • Evaluate project capacity for production process design and development
  • Develop and implement standard manufacturing procedures to reduce overall costs and determine product quality standards
  • Arrange equipment and tools to support production and ensure products are delivered within approved timelines and budget ...
Posted
a month ago
  • Support new product and process development through industrialisation and scale-up
  • Work closely with R&D, Engineering, Production and Quality teams
  • Drive continuous improvement across pressing operations ...
Posted
25 days ago

Singapore

  • In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
  • Responsible for conducting pre-production pilot run and training for associates.
  • Provide technical support to Production to achieve technical and quality requirements. ...
Posted
a month ago

Singapore

  • Drive continuous process improvements to enhance productivity, yield, quality, cycle time, and manufacturing cost using Lean Six Sigma methodologies.
  • Support New Product Introduction (NPI) and Design for Manufacturability (DFM) activities to ensure smooth product transfer from development to mass production.
  • Conduct process validation, tooling development, and risk assessments (e.g., FMEA) to establish robust and reliable manufacturing processes. ...
Posted
a month ago

Singapore

  • Working Hours: 5 days, 8.30am to 5.30pm
  • Salary Package: Basic + Allowances
  • Operate specialised equipment and perform cleaning, inspection, and handling of precision components in accordance with established procedures. ...
Posted
14 days ago

Singapore

  • Drive continuous process improvements to enhance productivity, yield, quality, cycle time, and manufacturing cost using Lean Six Sigma methodologies.
  • Support New Product Introduction (NPI) and Design for Manufacturability (DFM) activities to ensure smooth product transfer from development to mass production.
  • Conduct process validation, tooling development, and risk assessments (e.g., FMEA) to establish robust and reliable manufacturing processes. ...
Posted
a month ago

Singapore

  • Working Hours: 5.5 days (Mon to Fri, 8am to 5pm; Sat, 8am to 12pm) – Will change to 12-hours rotating shift after 3 months
  • Salary Package: Up to $2,700 + OT + Shift Allowances + Transport Allowance + Bonus
  • Operate and monitor plant equipment and production processes in accordance with operational procedures. ...
Posted
14 days ago

Singapore

  • Perform batch processing activities in a production environment that includes both automated systems and manual operations.
  • Participate in training and, where required, support the company's Emergency Response Team (ERT) in accordance with operational and safety requirements.
  • Maintain compliance with company quality, safety, health, and environmental policies and procedures. ...
Posted
15 days ago

Singapore

  • Perform post-process disposition, including geometry (Geo) and HOSPC evaluations.
  • Initiate containment and corrective actions for process abnormalities.
  • Support operations with setup verification and process compliance. ...
Posted
15 days ago

Malacca City

  • Provide inputs for updating of related documents and is responsible for their correct contents, eg Process of Record, Assembly Design Rule, Process Roadmap, Failure catalogue, Control Plan, Maintenance checklist, Unit process roadmap for development projects.
  • Liaise with suppliers for continuous improvement and perform verification and qualification activities for new tooling, machines and materials in Development projects.
  • Be the technical lead for task force and complex problem solving team using Statistical and analytical tools, eg SPC, APC, DOE, 8D, FMEA, DFMEA, etc. ...
Posted
a month ago

Prai

  • Maintenance & Troubleshooting:
  • Learn and execute routine preventive maintenance (PM) schedules for production machinery.
  • Assist in basic technical troubleshooting, root-cause analysis, and equipment repairs under supervision. ...
Posted
15 days ago

Singapore

  • Monitor equipment performance and implement improvement measures.
  • Supervise, train, and mentor maintenance technicians, engineers, and contractors.
  • Allocate manpower effectively to meet maintenance and operational priorities. ...
Posted
3 days ago

Singapore

Posted
6 days ago

Singapore

  • Ensure compliance with company policies, safety regulations, quality standards and SOP.
  • Analyse production issues, implement corrective & continuous improvement initiatives.
  • Plan and allocate manpower effectively to meet operational requirements. ...
Posted
6 days ago

Singapore

  • Automation & Robotics: Operate,set up, and troubleshoot 3-axis/5-axis robotic sprue pickers and automatedvision inspection systems.
  • Mould Care & Maintenance: Performpreventative maintenance on molds, cleaning tool inserts, core pins, andparting lines to maximize tooling longevity.
  • Diploma in Engineering ...
Posted
a month ago

Singapore

Posted
a month ago
  • Responsible for applying global quality requirements related to B. Braun's production sites worldwide for equipment, molding, and tooling.
  • Develop project concepts and feasibility studies on best practice for manufacturing, including equipment, molding, and tooling processes.
  • Verify technical compliance with acceptance criteria, conduct acceptance tests, and monitor the commissioning and relocation of equipment, molding, and tooling. - Provide customer support in all project phases for equipment, molding, and tooling. ...
Posted
a month ago