1,300+ Manufacturing Engineers Jobs in Malaysia | Job Vacancies | June 2026 | Ricebowl
search.result_querys_job
"manufacturing engineers"
job_alert.title_toggle_job
job_alert.activate_job_alert
job_alert.job "manufacturing engineers"
job_alert.btn_manage_alert
SGD4,500 - SGD4,500 Per Month
Singapore
- In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
- Responsible for conducting pre-production pilot run and training for associates.
- Provide technical support to Production to achieve technical and quality requirements. ...
Posted
10 days ago
Undisclosed
Singapore
- Prepares time estimates for proposed projects and evaluates time factors.
- Minimize change over time by ensuring programs use common set-ups where possible.
- Verify that machine maintenance is being performed on schedule. ...
Posted
18 days ago
MYR4,000 - MYR4,000 Per Month
George Town
- Facilitate the introduction of new processes, equipment, and materials, including installation, calibration, EHS assessments, debugging, and documentation.
- Apply Lean methodologies and process improvement tools to enhance efficiency, reduce waste, and improve cost-effectiveness.
- Support process and equipment validation activities, including PFMEA, validation plans, protocols, and reports. ...
Posted
10 days ago
SGD3,500 - SGD3,500 Per Month
Singapore
- Job responsibilities:
- -Assist in production line to ensure smooth production and resolve issues arising from work.
- -Help to keep the production line smooth and stable so as to ensure good quality products being produced. ...
Posted
19 days ago
SGD1,000 - SGD2,000 Per Month
Singapore
- • Apply Six Sigma/Lean Manufacturing methodologies for continuous process improvements
- • Planning and scheduling of ERP system
- Requirements: ...
Posted
19 days ago
Undisclosed
Malaysia
- Contract: 1 year renewable
- Salary: RM3,500 – RM4,000
- Apply via WhatsApp: 012-274 1997 ...
Posted
11 days ago
Undisclosed
- Implementing of EC (Engineering Changes)
- Participate / lead in NPI (New Product Introduction) projects
- Participating / lead in improvement projects ...
Posted
19 days ago
Undisclosed
Woodlands
- Expand PCBA troubleshooting skills to investigate the root cause of defective instruments/PCBAs/components.
- Perform First Article Evaluation of Electrical/Electronic parts and software.
- Degree in Electrical and Electronics Engineering. ...
Posted
19 days ago
SGD4,500 - SGD4,500 Per Month
Singapore
- In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
- Responsible for conducting pre-production pilot run and training for associates.
- Provide technical support to Production to achieve technical and quality requirements. ...
Posted
19 days ago
SGD4,500 - SGD4,500 Per Month
Singapore
- In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
- Responsible for conducting pre-production pilot run and training for associates.
- Provide technical support to Production to achieve technical and quality requirements. ...
Posted
19 days ago
Undisclosed
Singapore
- Design tooling, fixtures and gauges.
- Develop special processes such as Heat Treatment, Brazing, EDM, Shot peening and Welding etc
- Conduct pre-production pilot run and training for associates. ...
Posted
13 days ago
SGD4,000 - SGD4,000 Per Month
Singapore
- Responsible for troubleshooting machinery malfunctions.
- Take charge of maintaining updated records of repairs and completed preventative maintenance work.
- Responsible for identifying and purchasing critical spares for preventive maintenance. ...
Posted
13 days ago
SGD4,000 - SGD4,000 Per Month
Singapore
- Responsible for troubleshooting machinery malfunctions.
- Take charge of maintaining updated records of repairs and completed preventative maintenance work.
- Responsible for identifying and purchasing critical spares for preventive maintenance. ...
Posted
13 days ago
SGD4,500 - SGD4,500 Per Month
Singapore
- In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
- Responsible for conducting pre-production pilot run and training for associates.
- Provide technical support to Production to achieve technical and quality requirements. ...
Posted
13 days ago
APPLIED MATERIALS SOUTH EAST ASIA PTE. LTD.
SGD8,500 - SGD8,500 Per Month
Singapore
- Determine time standards and make recommendations for tooling and process requirements
- Develop and use test procedures, evaluate test results, and evaluate work methods, procedures, and policies
- Determine root causes and corrective actions for issues that arise during assembly or system testing; perform Process Failure Mode & Effects Analysis; and provide reports as needed ...
Posted
13 days ago
MYR3,000 - MYR5,000 Per Month
Tampoi
- Support engineering changes and first article evaluation processes
- Prepare regular reports such as demand plans, backlog reports, and NRE reports
- Handle RMA processes and coordinate returns with internal teams and customers ...
Posted
14 days ago
MYR3,000 - MYR5,000 Per Month
Tampoi
- Support engineering changes and first article evaluation processes
- Prepare regular reports such as demand plans, backlog reports, and NRE reports
- Handle RMA processes and coordinate returns with internal teams and customers ...
Posted
14 days ago
Undisclosed
Singapore
- Lead and Drive problem solving Root Cause Analysis (RCA) and effective implementation of Corrective and Preventive actions
- Facilitate Quality Improvement Projects (QIP) to meet cell's SQDC KPIs
- Drive initiatives to reduce defect rates ...
Posted
14 days ago
Undisclosed
- Prepare periodical report for stakeholders on the project status.
- Bachelor's Degree in Engineering (Mechanical/ Mechatronic/ Electromechanical), Engineering (Material Science), Physics or equivalent.
- At least 2 years of related working experience in semiconductor industry. ...
Posted
14 days ago
Undisclosed
- Prepare periodical report for stakeholders on the project status.
- Bachelor's Degree in Engineering (Mechanical/ Mechatronic/ Electromechanical), Engineering (Material Science), Physics or equivalent.
- At least 2 years of related working experience in semiconductor industry. ...
Posted
14 days ago
Undisclosed
Singapore
- Daily review of non-conformances, defect rates monitoring for required short term, medium term and long term actions.
- Lead and Drive problem solving Root Cause Analysis (RCA) and effective implementation of Corrective and Preventive actions
- Facilitate Quality Improvement Projects (QIP) to meet cell's SQDC KPIs ...
Posted
14 days ago
Undisclosed
Singapore
- Lead and Drive problem solving Root Cause Analysis (RCA) and effective implementation of Corrective and Preventive actions
- Facilitate Quality Improvement Projects (QIP) to meet cell's SQDC KPIs
- Drive initiatives to reduce defect rates ...
Posted
14 days ago
Undisclosed
- At Western Digital, our vision is to power global innovation and push the boundaries of technology to make what you thought was once impossible, possible.
- At our core, Western Digital is a company of problem solvers. People achieve extraordinary things given the right technology. For decades, we’ve been doing just that. Our technology helped people put a man on the moon.
- We are a key partner to some of the largest and highest growth organizations in the world. From energizing the most competitive gaming platforms, to enabling systems to make cities safer and cars smarter and more connected, to powering the data centers behind many of the world’s biggest companies and public cloud, Western Digital is fueling a brighter, smarter future. ...
Posted
14 days ago
APPLIED MATERIALS SOUTH EAST ASIA PTE. LTD.
SGD5,000 - SGD5,000 Per Month
Singapore
- Gathers operational and test data and evaluates results.
- Monitors, evaluates and inspects logistics quality.
- Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities. ...
Posted
21 days ago
MTC Consulting Pte. Ltd.
SGD3,800 - SGD4,500 Per Month
Singapore
- Send QA reports to vendors
- Ensure timely closure and response of all QA issues
- Ensure effective corrective action taken for all NCR/CAR issued ...
Posted
15 days ago
SGD3,000 - SGD3,500 Per Month
Singapore
- Troubleshoot manufacturing processes to ensure product specifications are met.
- Key Responsibilities:
Posted
a month ago
Undisclosed
Malaysia
- Safety improvement
- Support industrialization of new products
- Understand product / process specifications and customer requirements; ...
Posted
21 days ago
Job searches related to “Manufacturing Engineers”
job_search.browse_location:
job_search.more_location
job_search.browse_company:
job_search.more_company
job_search.browse_job_by_title:
job_search.browse_job_by_title: