1,500+ Manufacturing Engineers Jobs in Malaysia | Job Vacancies | July 2026 | Ricebowl
search.result_querys_job
"manufacturing engineers"
Never miss any updates for Manufacturing Engineers jobs
Manage Alert
SGD5,000 - SGD6,500 Per Month
Singapore
- Experience in well-established organizations supporting over 200 users is essential.
- Degree in IT or related field with Cisco Associate certification (CCNA) preferred.
- Minimum 7 years of level 2 technical IT support experience in MNCs or large SMEs. ...
Posted
9 days ago
Undisclosed
Singapore
- Troubleshoot and solve the daily analysis related issues. Review analysis report periodically for abnormalities. Raise MRB and initiate meeting if found any abnormalities during lab testing.
- Monitor equipment condition, calibration, preventive maintenance. Liaise with vendor to fix the breakdown equipment
- Define work instruction, procedure and record form for lab technician and operation ...
Posted
22 days ago
WUXI XDC SINGAPORE PRIVATE LIMITED
SGD4,500 - SGD4,500 Per Month
Singapore
- In accordance with GMP requirements, draft and revise related operating procedures, batch production records and related files
- Strictly adhere to change control and deviation investigation process, organize the drafts and implementation of changes, conduct deviation investigations, and establish corrective and preventive actions
- Analyze and solve problems arising in the manufacturing process independently and understand how to contribute to solving problems and optimizing the process through literature review ...
Posted
9 days ago
SGD4,500 - SGD4,500 Per Month
Singapore
- In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
- Responsible for conducting pre-production pilot run and training for associates.
- Provide technical support to Production to achieve technical and quality requirements. ...
Posted
17 days ago
MYR4,000 - MYR4,000 Per Month
George Town
- Facilitate the introduction of new processes, equipment, and materials, including installation, calibration, EHS assessments, debugging, and documentation.
- Apply Lean methodologies and process improvement tools to enhance efficiency, reduce waste, and improve cost-effectiveness.
- Support process and equipment validation activities, including PFMEA, validation plans, protocols, and reports. ...
Posted
17 days ago
HKM HR MANAGEMENT PTE. LTD.
SGD4,000 - SGD4,000 Per Month
Singapore
- Drive continuous improvement, cost reduction, and efficiency gains.
- Prepare technical reports on equipment performance.
- Diploma or Bachelor's in Electrical Engineering or equivalent. ...
Posted
10 days ago
A*STAR RESEARCH ENTITIES
SGD4,500 - SGD4,500 Per Month
Singapore
- Integrate platform services into agentic AI workflows, chatbot interfaces, and decision-support tools deployed on the shop floor.
- Contribute to the end-to-end development and deployment of agentic AI applications for real-world manufacturing use cases (e.g., maintenance, quality management, and production planning).
- Document APIs, services, and system architecture for internal teams and industry partners. ...
Posted
10 days ago
A*STAR RESEARCH ENTITIES
SGD4,500 - SGD4,500 Per Month
Singapore
- Integrate platform services into agentic AI workflows, chatbot interfaces, and decision-support tools deployed on the shop floor.
- Contribute to the end-to-end development and deployment of agentic AI applications for real-world manufacturing use cases (e.g., maintenance, quality management, and production planning).
- Document APIs, services, and system architecture for internal teams and industry partners. ...
Posted
10 days ago
AIM RECRUIT CONSULTANCY PTE. LIMITED
SGD3,000 - SGD3,000 Per Month
Singapore
- Prepare materials for continuity of job i.e Packing materials, pallets, accessories
- Liaise with departments on processes, and develop check methods for quantity/parts number.
- Update of materials pack status via MPS and ready to ship without delay. ...
Posted
10 days ago
Undisclosed
Prai
- Design, debug and validate assembly fixtures and assembly processes for new products.
- Design and maintain fixture programming and related process programs.
- Plan assembly fixture procurement and obtain quotation lists from suppliers. ...
Posted
23 days ago
Undisclosed
Malaysia
- Support production ramp‑ups, engineering changes, and sustaining manufacturing activities.
- Partner with Operations and Production teams to resolve assembly issues and improve manufacturability.
- Lead or support root cause investigations for manufacturing quality issues, nonconformances, and customer‑reported defects. ...
Posted
23 days ago
SGD4,200 - SGD4,200 Per Month
Singapore
- Plan and execute product and process validation activities, including test plans, prototype builds, and first article (FA) builds
- Collaborate closely with project management, supply chain, quality, and other production teams to ensure alignment and execution
- Support and drive NPI activities from prototype and FA build through to smooth transition into mass production ...
Posted
a month ago
Undisclosed
Jurong West
- Provide proper storage, control and maintenance of documents within the department to ensure security and efficient retrieval of documents as well as conformance to stipulated regulations, Such controls should include of maintaining a master listing for all controlled documents, maintaining a record of the distribution and retrieval histories of documents, proper disposal of obsolete documents and maintaining a record for controlled documents issued by centralized document control.
- Proper documentation control of process capability, studies, process FMEA, SOP, Process Specification, OJT Task Analysis, training’s record and production records. With reference to TS16949 requirement.
- To represent the department in customer, 3rd party or internal audits that are related to documents and records control processes ...
Posted
23 days ago
Undisclosed
- Utilize CMM (Coordinate Measuring Machine), micrometers, calipers, and other precision instruments for inspection.
- Analyze material test reports (MTRs) and ensure conformance to aerospace material standards.
- Lead root cause analysis (RCA) and implement corrective and preventive actions (CAPA) for quality issues. ...
Posted
10 days ago
Undisclosed
- Lead root cause analysis (RCA) for major equipment failures and implement effective corrective and preventive actions.
- Support equipment upgrades, hardware modifications, and machine conversion activities to meet product and technology roadmap requirements.
- Coordinate new equipment installation, commissioning, qualification, and acceptance to ensure systems meet operational and safety standards. ...
Posted
10 days ago
Undisclosed
Singapore
- HSE – Ensure full compliance with Health, Safety & Environmental standards and meet the expectations of the Zero Harm programme.
- Product Safety – Understand product safety risks and implement mitigation actions to achieve required safety levels in support of the Company’s Safety Management System.
- Quality – Promote a zero-defect culture by ensuring manufacturing processes and methods are developed and deployed to support Right First Time principles. Support process and product quality investigations and manage NADCAP accreditation requirements. ...
Posted
10 days ago
Undisclosed
- Lead troubleshooting and root cause analysis activities to minimize downtime, defects, and scrap.
- Review MRB (Material Review Board) parts and implement corrective actions to reduce quality issues and waste.
- Develop and improve manufacturing methods, work instructions, tooling, fixtures, and assembly procedures. ...
Posted
23 days ago
Undisclosed
- As the connection between R&D and the factory, to assist in product hardware and software validation work, engineering change confirmation；
- As a member of the project to participate in promoting the factory lean process, provide technical solutions;
- The formation of a strong and solid engineering team, if there is a business need to go to headquarters for training. ...
Posted
23 days ago
Undisclosed
Port Klang
- Support bending qualification and production validation activities
- Coordinate technical clarification with customer engineering personnel when required
- Supervise day-to-day tube fabrication and bending activities ...
Posted
4 days ago
SGD3,500 - SGD3,500 Per Month
Singapore
- ESSENTIAL DUTIES AND RESPONSIBILITIES
- · Monitor and continuously improve daily quality/efficiency performance for assigned areas.
- · Design and procure production tooling, processing equipment and workstations. ...
Posted
a month ago
Undisclosed
- Lead equipment upgrades, machine conversions, and technology improvements to support next-generation HDD product requirements.
- Manage new equipment installation, commissioning, and acceptance testing to ensure systems meet operational, safety, and process specifications before production release.
- Monitor and analyze equipment performance, reliability, and OEE data to identify improvement opportunities and drive operational excellence. ...
Posted
11 days ago
Undisclosed
- Lead troubleshooting and root cause analysis activities to minimize downtime, defects, and scrap.
- Review MRB (Material Review Board) parts and implement corrective actions to reduce quality issues and waste.
- Develop and improve manufacturing methods, work instructions, tooling, fixtures, and assembly procedures. ...
Posted
23 days ago
SGD3,500 - SGD5,500 Per Month
Singapore
- Ensure strict adherence to manufacturing procedures and safety guidelines.
- Drive continuous improvement initiatives to enhance efficiency and reduce errors.
- Diploma or Degree in Engineering, Science, or Manufacturing-related disciplines. ...
Posted
3 days ago
SGD3,500 - SGD3,500 Per Month
Singapore
- Ensure strict adherence to manufacturing procedures and safety guidelines.
- Drive continuous improvement initiatives to enhance efficiency and reduce errors.
- Diploma or Degree in Engineering, Science, or Manufacturing-related disciplines. ...
Posted
4 days ago
SGD3,500 - SGD5,500 Per Month
Central
- Ensure strict adherence to manufacturing procedures and safety guidelines.
- Drive continuous improvement initiatives to enhance efficiency and reduce errors.
- Diploma or Degree in Engineering, Science, or Manufacturing-related disciplines. ...
Posted
4 days ago
SGD3,500 - SGD3,500 Per Month
Singapore
- Ensure strict adherence to manufacturing procedures and safety guidelines.
- Drive continuous improvement initiatives to enhance efficiency and reduce errors.
- Diploma or Degree in Engineering, Science, or Manufacturing-related disciplines. ...
Posted
5 days ago
Undisclosed
Malaysia
- Contract: 1 year renewable
- Salary: RM3,500 – RM4,000
- Apply via WhatsApp: 012-274 1997 ...
Posted
18 days ago
SGD3,500 - SGD3,500 Per Month
Singapore
- Ensure strict adherence to manufacturing procedures and safety guidelines.
- Drive continuous improvement initiatives to enhance efficiency and reduce errors.
- Diploma or Degree in Engineering, Science, or Manufacturing-related disciplines. ...
Posted
6 days ago
Job searches related to “Manufacturing Engineers”
job_search.browse_location:
job_search.more_location
job_search.browse_company:
job_search.more_company
job_search.browse_job_by_title:
job_search.browse_job_by_title: