400+ It Engineer Jobs in Bayan Lepas - June 2026 - High Salaries
search.result_querys_job
"it engineer"
text.in Bayan Lepas
不要错过任何 It Engineer 的新工作机会
激活工作提醒
工作 "it engineer"
在 "Bayan Lepas"
管理提醒
MYR5,000 - MYR6,800 每月
- Monitor and control conformance to specification are followed within tolerance limit of the original specifications
- Update and review the QA spec and feedback on the changes for internal and external basis.
- Act as a customer interface on all Quality and engineering matters. ...
Posted
8 days ago
Undisclosed
- Support existing product firmware modification & features enhancement.
- Bachelor or higher degree in Computer Science/Electronics/Micro-Electronics or equivalent.
- Minimum 5 years of working experience in firmware or embedded software experience. ...
Posted
a month ago
Undisclosed
- Conduct and execute facility system improvements on reliability hardening, safety performance as well as cost optimization and reduction
- Perform facility inspections and report on condition affecting operations.
- Monitor and supervise HVAC preventive maintenance outsource service contracts ...
Posted
a month ago
Undisclosed
- Gradually improve network uptime.
- Secure the network from malicious external/internal attacks.
- Provide technical leadership and expertise in escalations, P1-P3 incident response tickets. ...
Posted
a month ago
Undisclosed
- Work closely with application, technical, and internal teams to prepare proposals and solutions
- Identify and develop new business opportunities in the region.
- Diploma or Degree in Engineering or Business Administration. Advantage with Electrical & Electronic Engineering or equivalent. ...
Posted
16 days ago
Undisclosed
- Perform physical verification (DRC/LVS), crosstalk analysis, and EM/IR checks to ensure design reliability and manufacturability.
- Collaborate with front-end design, STA, and power teams to resolve timing, congestion, and design rule issues efficiently.
- Develop and maintain methodology scripts (Tcl, Perl, or Python) to automate and streamline physical design and STA workflows. ...
Posted
21 days ago
Undisclosed
- Perform requirement reviews, design reviews and code reviews.
- Perform unit testing and release of the software according to SW release process.
- Develop the SW design taking into consideration the dependencies to other module and integration into the overall system. ...
Posted
16 days ago
Undisclosed
- Bachelor’s/Master’s in Mechatronics, Electronic Engineering, Photonics, Physics, or Computer Science, with semiconductor testing and electronics exposure
- Min 3–5 years’ experience in semiconductor/electronics, across R&D and manufacturing, including NPD, test development, and production ramp-up
- Strong expertise in semiconductor test engineering, IC test platforms (e.g., Advantest, NI PXI), electronics fundamentals, and failure analysis (FAR, root cause, returns) ...
Posted
21 days ago
Undisclosed
- Work and interact with colleagues from other divisions such as R&D hardware, R&D software, systems R&D, manufacturing, or other business groups.
- Sustain and maintain the software product in meeting both the quality and security requirements.
- S. or M.S. in computer science, and/or computer engineering, and/or electrical engineering. ...
Posted
a month ago
Undisclosed
- Work and interact with colleagues from other divisions such as R&D hardware, R&D software, systems R&D, manufacturing, or other business groups.
- Sustain and maintain the software product in meeting both the quality and security requirements.
- S. or M.S. in computer science, and/or computer engineering, and/or electrical engineering. ...
Posted
a month ago
Undisclosed
- Act as liaison between Research and Development Teams and Manufacturing Operations Organization to provide potential corrective actions and feedback based on root cause determinations.
- Perform advanced unit, integration, and systems verification and validation testing using HW/SW tools. Review others testing methodologies and algorithms or hardware to ensure optimal test cases as needed.
- Work closely with other project team members as needed to ensure the final combined product has compatible software, electronic hardware, and mechanical hardware which functions properly together and performs at levels specified in the product specifications. ...
Posted
a month ago
Undisclosed
- Provides customer product design engineering for economic production; may participate in meetings with customers.
- Assesses proper material, tooling, automation and equipment selection.
- Works with manufacturing to trouble-shoot problems, upgrades, retrofits, set-ups, methods development, and the development of process parameters ...
Posted
a month ago
Undisclosed
- Provides customer product design engineering for economic production; may participate in meetings with customers.
- Assesses proper material, tooling, automation and equipment selection.
- Works with manufacturing to trouble-shoot problems, upgrades, retrofits, set-ups, methods development, and the development of process parameters ...
Posted
a month ago
Undisclosed
- Participate in and drive safety related escalations
- Generation of specifications, details, BOM’s, and assemblies
- Understanding of product development and manufacturing processes ...
Posted
a month ago
Undisclosed
- Collaborate closely with project teams during the development phase (e.g. design and test reviews) to ensure a seamless transition from development to mass production. Support the quality assurance team with RMA handling and failure analysis.
- Act as the technical interface for internal stakeholders and external customers, delivering expert guidance and support.
- Ensure that any fabrication process modifications comply with product performance and reliability requirements.Monitor production and feedback relevant issues to ensure DFM
Posted
22 days ago
Undisclosed
- Collaborate closely with project teams during the development phase (e.g. design and test reviews) to ensure a seamless transition from development to mass production. Support the quality assurance team with RMA handling and failure analysis.
- Act as the technical interface for internal stakeholders and external customers, delivering expert guidance and support.
- Ensure that any fabrication process modifications comply with product performance and reliability requirements.Monitor production and feedback relevant issues to ensure DFM
Posted
22 days ago
Undisclosed
- Develop, implement, and maintain Quality Management Systems (QMS) in compliance with ISO 9001, ISO/IEC 17025, and RF regulatory requirements (FCC, CE, ETSI, IEEE)
- Prepare and manage documentation for audits, certifications, and regulatory approvals.
- Assist in internal audits and external audit readiness. ...
Posted
22 days ago
Undisclosed
- Collaborate as project team member on Software design matters.
- Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
- Perform requirement reviews, design reviews and code reviews. ...
Posted
18 days ago
Undisclosed
- Collaborate as project team member on Software design matters.
- Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
- Perform requirement reviews, design reviews and code reviews. ...
Posted
18 days ago
Undisclosed
- Manage NPI line activities, monitor all in process sputter data (particles, yields, DET etc),
- Make necessary process adjustments as per preset guidelines
- Take appropriate actions during the expt or continuous production run and feedback/escalate to Engineers for any issues. ...
Posted
a month ago
Undisclosed
- Develop process recipes, control plans, and standard operating procedures (SOPs)
- Translate R&D/lab-scale processes into robust, scalable, high-volume manufacturing processes
- Own sustaining engineering for assigned process modules — ensure processes remain stable, in control, and within specification ...
Posted
18 days ago
Undisclosed
- Accountable for new product ramping during NPI transfer.
- Identify potential yield, quality, and sputter utilization issues for the new product and work closely with related parties to solve the issues in the beginning stage.
- Work closely with other areas to solve any interaction defect issues. ...
Posted
a month ago
Undisclosed
- To initiate and lead Sputter Process Improvement Projects (SU/STT/Cost/Quality/PPH & others), which include new products/machines/process qualification.
- To lead, supervise and coach/train process tech & SE, including engineering specialists and characterize technicians.
- Responsible for long-term improvement projects (SU/STT/Cost/Quality/PPH & others). Others include FMEA. ...
Posted
a month ago
Undisclosed
- Develop process recipes, control plans, and standard operating procedures (SOPs)
- Translate R&D/lab-scale processes into robust, scalable, high-volume manufacturing processes
- Own sustaining engineering for assigned process modules — ensure processes remain stable, in control, and within specification ...
Posted
18 days ago
Undisclosed
- Manage new produciton develop new system setup.
- Responsible to build material readiness and clear understand to DOE matrix on the engineering build.
Posted
13 days ago
Undisclosed
- Manage new produciton develop new system setup.
- Responsible to build material readiness and clear understand to DOE matrix on the engineering build.
Posted
13 days ago
Undisclosed
- Manage handling and qualification of cleanroom indirect materials by setting cleanliness criteria, performing inspections, and approving materials for use.
- Define cleanroom protocols, including gowning, behavior, and contamination prevention practices, and provide training to ensure compliance.
- Define and coordinate with laboratories implement test plans, analyse cleanliness data, investigation deviations, and recommending mitigation actions for product & process cleanliness compliance. ...
Posted
a month ago
Undisclosed
- Develop high-quality designs for various board types, including rigid, flex, and rigid-flex configurations.
- Closely collaborating with electrical and mechanical teams to interpret requirements, resolve design issues, and implement simulation-driven layout changes.
- Work with PCB fabrication to ensure Design for Manufacturing (DFM) standards are met, optimizing stack-up, maximizing manufacturing yield, and reducing cost. ...
Posted
a month ago
Undisclosed
- Plan and implement cost improvements or savings for Lube Process
- Yield/Defect/Quality improvement
- New software and project propagation buy off ...
Posted
a month ago
Job searches related to “It Engineer”
job_search.browse_company:
job_search.more_company
job_search.browse_job_by_title: