400+ Engineering Jobs in Negeri Sembilan - July 2026 - High Salaries

Showing 495 jobs results for "engineering" in Negeri Sembilan

Never miss any updates for Engineering jobs

Undisclosed
  • Conduct machine setup Minor/Major, alignment, recipe loading, and basic parameter adjustments.
  • Perform regular machine checks, cleaning, and minor preventive maintenance.
  • Identify process abnormalities, machine errors, and reject trends; report issues to engineers or supervisors promptly. ...
Posted
25 days ago
Undisclosed
  • To participate on the design of new equipment and new lines
  • To lead Lean design workshop
  • To manage production equipment introduction using IPROM ...
Posted
25 days ago
MYR1,700 - MYR3,000 Per Month
Posted
17 days ago

PEM FASTENERS (MALAYSIA) SDN BHD

MYR2,000 - MYR2,300 Per Month

Senawang

  • Reporting the defective products and assist to analyze the abnormality found during installation/performance test.
  • To assist in the performing the duties of a QA Inspector as required.
  • To prepare daily documentation as required for inspection and testing (if applicable). ...
Posted
a month ago
Undisclosed
  • Perform audits on the line to detect non-respect of the Standard and identify with the APU the actions to be completed to therefore comply with the Standard
  • Participate in the eradication of Customer issues and Non Quality issues
  • Along the APU QRQC meeting ensure that rules are respected and “Stop at first disagree” and “Stop at first no” are applied ...
Posted
a month ago
MYR2,500 - MYR3,500 Per Month
  • To fulfill customers' delivery schedule
  • Job Type: Full-time
  • Pay: RM2,500.00 - RM3,500.00 per month ...
Posted
23 days ago
MYR1,500 - MYR4,000 Per Month
  • AL
  • Any race
  • 18 YEARS OLD AND ABOVE ...
Posted
23 days ago
MYR2,500 - MYR3,500 Per Month
  • To fulfill customers' delivery schedule
  • Job Type: Full-time
  • Pay: RM2,500.00 - RM3,500.00 per month ...
Posted
23 days ago
MYR9,000 - MYR9,000 Per Month
  • Coordinate with Resident Architect, Clerk of Works, M&E Inspectors, consultants, and contractors.
  • Review and endorse method statements, shop drawings, and material submissions.
  • Monitor workmanship quality and ensure compliance with codes, standards, and approvals. ...
Posted
13 days ago
Undisclosed
  • Perform audits on the line to detect non-respect of the Standard and identify with the APU the actions to be completed to therefore comply with the Standard
  • Participate in the eradication of Customer issues and Non Quality issues
  • Along the APU QRQC meeting ensure that rules are respected and “Stop at first disagree” and “Stop at first no” are applied ...
Posted
a month ago
Undisclosed
  • Establish and maintain tracking records for probe card usage and performance (e.g., probe beam lifespan, touchdowns)
  • Oversee installation and qualification of probe card analyzer equipment
  • Plan and execute upgrades or modifications to improve efficiency and performance ...
Posted
23 days ago
Undisclosed
  • Establish and maintain tracking records for probe card usage and performance (e.g., probe beam lifespan, touchdowns)
  • Oversee installation and qualification of probe card analyzer equipment
  • Plan and execute upgrades or modifications to improve efficiency and performance ...
Posted
23 days ago
MYR7,500 - MYR13,000 Per Month
  • Perform process and energy optimization, as well as process troubleshooting, for the assigned units.
  • Review engineering deliverables, including Design Basis, FEED documents, PFDs, P&IDs, equipment datasheets, heat and material balances (H&MB), utility summaries, and operating manuals.
  • Provide process and operational input to process safety reviews, commissioning activities, and performance test runs for all plant changes. ...
Posted
24 days ago
Undisclosed
  • Advanced Embedded Packaging
  • Apply expertise in chip embedding, interposer integration, and thermal/electrical optimization for module development.
  • Perform process characterization and data analysis to optimize yield, reliability, and performance. ...
Posted
17 days ago
MYR2,500 - MYR5,000 Per Month
  • Customer Technical Support
  • Quality & Compliance
  • Cross-functional Collaboration ...
Posted
22 days ago
MYR2,500 - MYR5,000 Per Month
  • Customer Technical Support
  • Quality & Compliance
  • Cross-functional Collaboration ...
Posted
22 days ago
Undisclosed
  • Support chemical Drain /change / top up / consumable or spare part order
  • Daily reporting for the inventory / job done / PM task complete and follow up
  • Recover minor stoppages of tool according to tool OCAP ...
Posted
22 days ago
Undisclosed
  • Perform process and energy optimization, as well as process troubleshooting, for the assigned units.
  • Review engineering deliverables, including Design Basis, FEED documents, PFDs, P&IDs, equipment datasheets, heat and material balances (H&MB), utility summaries, and operating manuals.
  • Provide process and operational input to process safety reviews, commissioning activities, and performance test runs for all plant changes. ...
Posted
a month ago
Undisclosed
  • Monitor key equipment performance indicators (downtime, MTBA, PM success rate, etc.)
  • Maintain and sustain equipment recipes and configurations
  • Ensure all maintenance activities comply with safety and environmental standards ...
Posted
23 days ago
Undisclosed
  • Monitor key equipment performance indicators (downtime, MTBA, PM success rate, etc.)
  • Maintain and sustain equipment recipes and configurations
  • Ensure all maintenance activities comply with safety and environmental standards ...
Posted
23 days ago
Undisclosed
  • Manage the full spectrum of cost management and quantity surveying functions for Mechanical & Electrical (M&E) works in data centre projects, covering both pre-contract and post-contract activities.
  • Prepare and develop cost estimates, cost plans, budgets, and financial forecasts to support project planning and execution.
  • Prepare tender documentation, including Bills of Quantities (BOQ), specifications, tender reports, and related pre-contract correspondence. ...
Posted
7 days ago
Undisclosed
  • Develop, implement, and maintain incoming material inspection procedures, standards, and acceptance criteria.
  • Conduct hands-on incoming inspections and validation activities to ensure materials and components meet quality requirements.
  • Prepare, review, and maintain inspection reports, Non-Conformance Reports (NCRs), and other quality-related documentation. ...
Posted
24 days ago
Undisclosed
  • Support daily facilities maintenance activities by coordinating and supervising maintenance personnel and contractors when required.
  • Assist Facility Engineers and Supervisors in troubleshooting electrical issues and implementing effective solutions to improve equipment reliability.
  • Support commissioning, installation, modification, and troubleshooting activities for facility systems and production equipment. ...
Posted
a month ago
Undisclosed
  • Support daily facilities maintenance activities by coordinating and supervising maintenance personnel and contractors when required.
  • Assist Facility Engineers and Supervisors in troubleshooting electrical issues and implementing effective solutions to improve equipment reliability.
  • Support commissioning, installation, modification, and troubleshooting activities for facility systems and production equipment. ...
Posted
a month ago
MYR2,000 - MYR2,000 Per Month

Malaysia

  • CGPA 2.00 and above
  • Aged 27 and below
  • Energetic, self-motivated, and a great team player ...
Posted
19 days ago
MYR1,700 - MYR3,000 Per Month
Posted
a month ago
MYR1,700 - MYR2,200 Per Month
  • Approach tasks with a positive and cooperative attitude.
  • Undertake additional responsibilities as assigned with full responsibility and cooperation.
  • Possess Automotive / Mechanical qualification with SPM/MLVK/Diploma or equivalent. ...
Posted
23 days ago
Undisclosed
  • To work closely with BU, Rel Eng including Lab Operations on new products Rel hardware and Reliability Stress events setup with proper buyoff done with appropriate documentation & Knowledge transfer and training done.
  • Gain a full understanding of the automotive reliability specifications and guidelines including AQG324 and other Reliability standards
  • Be able to configure, assemble, and debug power cycle test systems for lifetime assessment. ...
Posted
12 days ago
Undisclosed
  • Ensure site activities comply with safety, quality, and housekeeping requirements.
  • Report daily progress, site issues, delays, or manpower concerns to the project team.
  • Support site documentation, attendance, permits, and basic reporting where required. ...
Posted
7 days ago
Undisclosed
  • Ensure site activities comply with safety, quality, and housekeeping requirements.
  • Report daily progress, site issues, delays, or manpower concerns to the project team.
  • Support site documentation, attendance, permits, and basic reporting where required. ...
Posted
8 days ago