Jobs
Companies
Forums
300+ Engineering Jobs in Kulim - October 2026 - High Salaries
Showing 338 jobs results for
"engineering"
in Kulim
Never miss any updates for Engineering jobs in Kulim
Manage Alert
Infineon Technologies
Undisclosed
- Handle wafers and prepare samples for implantation and metrology, following cleanroom protocols.
- Use Tableau, Excel, CEDA, or other data analysis tools to process and visualize experimental or production data.
- Assist with process characterization experiments (DOE – Design of Experiments) under the guidance of a mentor. ...
Posted
23 days ago
Undisclosed
- Design (JMP) and conduct experiments for all the above mentioned CIP activities
- Perform FMEA on process change/introduction, and ensure its timely delivery
- Master in an engineering or science discipline (chemical, mechanical, nuclear, physics, chemistry) ...
Posted
7 days ago
MYR3,000 - MYR4,000 Per Month
- Analyze circuit schematics and layout to trace faults and recommend rework or replacement actions.
- Document root cause findings in the failure analysis system and generate detailed debug and rework reports.
- Collaborate with Test Engineering, Quality, and Production teams to communicate trends and systemic issues. ...
Posted
10 days ago
MYR5,000 - MYR6,000 Per Month
- Issue and manage Non-Conformance Reports (NCRs), driving corrective and preventive actions to closure
- Review and verify Work Inspection Requests (WIRs) and Material Inspection Requests (MIRs) before submission to consultants
- Review material certificates, mill certs, and test reports to ensure traceability and compliance with project specifications ...
Posted
11 days ago
MYR2,900 - MYR2,900 Per Month
- Select and install the appropriate tools, fixtures, and offsets for machining operations.
- Monitor machine performance throughout production cycles to ensure quality and efficiency.
- Measure and inspect parts using precision measuring instruments. ...
Posted
11 days ago
Infineon Technologies
Undisclosed
- Parts or comsumbles preparation for PM Carry out routine check and recording on the tool parameters.
- Perform consumble/medium change out. Perform rebuild or service of parts/assemblies/swap kits.
- Diagnose and replace worn parts in PM equipment- “Report and Escalate abnormality” ...
Posted
23 days ago
Undisclosed
- Indirect supervisory responsibilities such as team lead (project based) and training / guidance of new technician
- Recommend solutions to moderate problems with information
- Communication skills to include documentation, presentation, team contribution, and training of technician ...
Posted
14 days ago
Undisclosed
- Conduct continuous improvement project to improve / optimize plastic injection molding process to meet customer expectation.
- Maintain a clean and safe work environment. Keep work area clean of debris.
- Responsible to attend technical issue in production. Ensure all products in production comply with all Quality requirements and handled according to established procedures. Work with operation team to ensure quality product produced for customer shipment on time. ...
Posted
14 days ago
Undisclosed
- Work closely with production, engineering, and quality teams to resolve technical issues and improve product reliability.
- Support new product introduction (NPI) by identifying potential risks and ensuring smooth ramp-up.
- Develop and maintain debugging procedures, troubleshooting guides, and technical documentation. ...
Posted
23 days ago
MYR3,000 - MYR5,000 Per Month
- · Prepare, coordinate and submit Material Approval Requests and relevant technical documents to the Consultant/Client for review and approval.
- · Ensure all materials proposed and delivered to site comply with the approved specifications, drawings and project requirements.
- · Maintain and update the material approval and inspection status. ...
Posted
2 days ago
Undisclosed
- Interact and communicate effectively with manufacturing, equipment suppliers, and process engineering in a support role Major Tasks and Activities: (Please indicate in the right column the level of responsibility Full(F) or Partial (P))
- Increase in responsibilities with competency level and technical expertise acquired through professional experience on the job according to targeted role.
- Detail knowledge of assigned area to understand related functional areas in Frontend or Backend Production area. ...
Posted
3 days ago
Undisclosed
- Support the implementation of improvement plans stemming from internal and external audits, as well as Root Cause Analyses (RCA).
- Identify, manage, and ensure proper storage of critical spare parts, while maintaining accurate tool inventories and consumable monitoring systems.
- Manage in-house contractors by overseeing work delegation, cost control, competency assessments, and Health, Safety, and Environment (HSE) compliance. ...
Posted
4 days ago
Undisclosed
- Manage the spare part availability to avoid maintenance short falls that impact equipment down and production.
- Support on new tool installation Ensure 5S, Cleanroom and Safety protocols compliances.
- Degree in Electrical & Electronic Engineering, Mechanical Engineering, Microelectronics. ...
Posted
4 days ago
Undisclosed
- Interpret engineering drawings, GD&T, tolerances, and technical specifications to determine appropriate measurement methods.
- Analyze measurement data, identify abnormalities or trends, and prepare accurate technical and inspection reports.
- Investigate measurement discrepancies, product non-conformities, and quality issues, and support root cause analysis and corrective actions. ...
Posted
5 days ago
Undisclosed
- Process and coordinate customer orders in a timely and accurate manner, working closely with internal teams to ensure smooth fulfilment.
- Develop a strong understanding of our product portfolio to provide informed guidance, technical support, and recommendations to new and existing clients.
- Prepare and deliver appropriate presentations and product demonstrations on our services and solutions. ...
Posted
6 days ago
Undisclosed
- Operates other plant auxiliary’s equipment as directed by Shift Charge Engineer ("SCE") or Central Control Room ("CCR") such as Emergency Diesel Generator, Fire Fighting system, Water Treatment Plant, pumps and others as per plant testing schedule and monitor all the parameters as per specification.
- Open and close valves and switches in sequence upon signals from CCR, in order to start or shut down gas turbines, Heat Recovery Steam Generator ("HRSG"), Steam Turbine and other auxiliary units.
- Assist SCE to perform process isolations and de-isolations as required by Permit to Work (PTW) system and recommission the system after completion of maintenance. ...
Posted
6 days ago
Undisclosed
- Support all training programs by development and implementation of specialized training sessions for all applicable functions.
- Conduct periodic review and maintenance of all documentation files; develop appropriate systems for document storage and access.
- Review all supplier or customer discrepancies. Coordinate and track the corrective/preventative action effort. ...
Posted
17 days ago
Undisclosed
- Prepare and follow up on 8D reports, CAPA, root cause analysis, and other quality-related reports.
- Monitor customer quality requirements and ensure issues are properly addressed and closed within the required timeline.
- Communicate with customers regarding product quality issues, corrective actions, and improvement plans. ...
Posted
7 days ago
Essential Engineering Solution Sdn Bhd
Undisclosed
- Familiarity with relevant industry standards, codes, and regulations for mechanical and building services systems.
- Proficiency in engineering and design software (e.g., AutoCAD, BIM tools, HVAC design software) is an advantage.
- Effective communication and stakeholder management skills, with the ability to work collaboratively with cross-functional teams. ...
Posted
16 days ago
Job searches related to “Engineering”
Browse Company:
More Companies
Browse "engineering" Job By: