100+ Electronics Jobs in Pulau Pinang - September 2026 - High Salaries
Showing 153 jobs results for
"electronics"
in Pulau Pinang
Undisclosed
- Support system/equipment go-live, upgrades, and migration, which may require short-term business trips.
- Perform other tasks as assigned by supervisors.
- Develop and maintain interfaces between the MES system and external systems, such as ERP, PLM, etc. ...
Posted
a month ago
MYR2,000 - MYR3,000 Per Month
- Assist with the installation of solar panels on rooftops and ground-mounted structures
- Collaborate with senior technicians and engineers on system upgrades, retrofits and expansions
- Ensure installations are completed according to project specifications and timelines ...
Posted
6 hours ago
Technical Service Engineer (Mandarin Speaker)
MYR2,500 - MYR4,000 Per Month
George Town, Pulau Pinang
- Maintain good relationships with customers and provide quality after-sales support.
- Liaise and work closely with customers to address service concerns and resolve technical issues.
- Take charge of assigned products and ensure smooth operations while providing continuous service support. ...
Posted
16 days ago
MYR1,700 - MYR2,500 Per Month
- Ensure works are performed according to technical specifications, approved procedures and safety requirements.
- Ensure CCTV systems and related equipment are installed and maintained properly.
- Report work completion status, technical issues, defects and site conditions to the Senior Technical Executive / Team Leader. ...
-Willing and able to travel between project sites within the Northern Zone.
-Willing to work after hours
+4
Be an early applicant!
Posted
25 days ago
MYR2,100 - MYR4,000 Per Month
Fresh Graduates
- Works from guidelines and standardized procedures/instructions.
- May design/build tools. Box build level debug and PCA level troubleshooting and rework
- Duties may be related to installation, maintenance, repair and support of manufacturing equipment, technical support of one or more production processes, product test and troubleshooting, and technical analyses and problem-solving. ...
Posted
14 days ago
MYR2,200 - MYR2,500 Per Month
+Additional Compensation
Fresh Graduates
- Perform Test cycle with correct sequent as per PMS Work Instruction.
- Perform Test fixture daily cleaning cycle per Work Instruction
- Perform 5S at Test Work Benches before start of Shift work. ...
Be an early applicant!
Posted
a month ago
MYR2,500 - MYR3,300 Per Month
- Operate and handle electronic measurement equipment such as oscilloscopes, power supplies, and electronic loads
- Perform electronic assembly tasks including hand soldering, solder touch-up, and PCBA rework
- Compile, record, and maintain accurate test data and measurement results in proper documentation format ...
Posted
2 months ago
Undisclosed
- Execute sourcing in accordance with the defined Approved Vendor List (AVL).
- Support all RFQ activities for new and established customers.
- Act as the key contact between suppliers and internal SQE, Business Unit, and Engineering teams to complete new component qualification. ...
Posted
3 months ago
Undisclosed
- Design statistical reports and dashboards according to user needs to help users improve management efficiency
- Ensure data integration and synchronization between MES and peripheral systems (WMS, ERP), and handle interface data
- Regularly summarize and refine, form a knowledge base, and share with other plant personnel to improve overall operation and maintenance capabilities ...
Posted
3 months ago
Undisclosed
- Liaise with internal team in reviewing the incoming material rejection from IQC and production with disposition action and feedback to supplier if rejection proved to be valid.
- Issue SCAR to supplier non conformance incoming lot and drive the supplier for root cause and corrective action(s) (RCCA) (8D, 5-Whys, FMEA, SPC) to eliminate recurring quality issues.
- Conduct an investigation and complete justification report on rejection feedback by IQC, production and customer side if the issue is caused by the supplier side. ...
Posted
a month ago
Undisclosed
- Brainstorming findings with other team members.
- Reporting any issues through the appropriate channels.
- Line Support- Downtime ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Perform downtime repair and troubleshooting for AOI machine
- Support engineering and NPI
Posted
a month ago
Undisclosed
- Troubleshoot major failure, escalate to shift coordinator/ Engineer for major issues. Work with Engineers on online troubleshooting on major downtime.
- Perform handler conversion based on the Productions requirements, min 4 models of handlers.
- Quality issue investigation (package defect, etc). ...
Be an early applicant!
Posted
a month ago
MYR2,500 - MYR3,500 Per Month
- Plan and coordinate site works, technician assignments and maintenance activities.
- Ensure efficient allocation of manpower, tools, equipment and technical resources.
- Coordinate with relevant teams to resolve site-related technical issues. ...
Posted
25 days ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Review bonding diagrams, strip drawings, process requirements, customers specifications and standard.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Monitor equipment performance and provide equipment improvement plans
- Project : Individual to own 1 project for Safety/UPH Improvement/Cost reduction/Minimize downtime
- Equipment downtime control ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Perform downtime repair and troubleshooting for AOI machine
- Support engineering and NPI
Be an early applicant!
Posted
a month ago
Undisclosed
- Monitor equipment performance and provide equipment improvement plans
- Project : Individual to own 1 project for Safety/UPH Improvement/Cost reduction/Minimize downtime
- Equipment downtime control ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Yield and quality involvement for daily work activities .
- Perform package conversion for Marking machines
- Qual lot follow up. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Interfaces with personnel on production, QA and other support groups regarding product/process related problems and disposition.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Liaise with supplier and customer related to design.
- Project Management.
- Provide technical support to internal and external customer. ...
Be an early applicant!
Posted
a month ago
MYR2,300 - MYR3,500 Per Month
- Follow all safety procedures, SOPs, and work instructions.
- Record maintenance activities and equipment issues accurately.
- Report recurring equipment issues or abnormal conditions for further investigation and improvement. ...
Posted
4 days ago
Undisclosed
- Responsible for the equipment hard down and perform line machine trouble-shooting.
- Investigates causes of machine breakdowns and implement improvements to prevent recurrences.
- Track and update periodically machine performance MTBA, MTBF, MTTA, MTTR and OEE. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Support PM on tooling and equipment conversion and buy-off.
- Ability to handle semi-major machine breakdown, trouble-shooting and able to read machine electrical and pneumatic diagram.
- Contribute idea of improvement, participate on productivity and equipment improvement project. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Support engineering build requests, ramp ups and platform extensions.
- Monitor and improving the yield of DA/GA process, including cost reduction activities.
- Support on the TMM and TMS activities ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Work together with Manufacturing team to prioritize the urgent and revenue lots as well as other lots in pipeline.
- Communicate with Manufacturing team to plan on the line activities and conversions
- Maintain and monitor process parameters in order to control process stability. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Maintain and update specifications to ensure compliance of operations.
- Source, evaluate, characterize, procure and implement material changes for quality, yield and cost improvement.
- Conduct engineering evaluation and characterization via usage of DOE/FMEA methods. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Plan NPI build schedule to meet the committed timeline
- Monitor and qualify NPI build within acceptable criteria prior to HVM
- Qual report compilation ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Improve FA workstations & foster team safety awareness.
- Execute Product Reliability Stress in Reliability Lab. Manage stress test chamber activities loading plan and chamber capacity.
- To perform package delamination analysis by using SAM (Scanning Acoustic Microscopy) machine. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Recommend for improvement thru the work methods/ elements studied.
- Capacity Planning
- Get Monthly Forecast from PC and compute Equipment and labour capacity requirement. ...
Be an early applicant!
Posted
a month ago