37 Electrical Engineering Jobs in Bayan Lepas - September 2026 - High Salaries

Showing 37 jobs results for "electrical engineering" in Bayan Lepas
Never miss any updates for Electrical Engineering jobs in Bayan Lepas
MYR3,500 - MYR6,000 Per Month
  • Perform other duties as assigned to support manufacturing operations.
  • Lead a team of manufacturing operators and line leaders to achieve output, quality, and cycle time targets.
  • Follow 5S practices, safety regulations, and quality standards at all times. ...
Team Leadership Operations Management
+2
Posted
4 days ago
Undisclosed
  • Responsible to verify information on travelers and other issuing forms.
  • Driving production for shorter cycle time and OTD performance.
  • Communicate status of products with ASE Sales / customers in timely manner. ...

Be an early applicant!

Posted
a month ago
Undisclosed
  • Oversee the preparation, validation, and approval of customer RFQs, quotations, and complex pricing proposals.
  • Ensure costing accuracy, competitiveness, and alignment with business strategies and profitability objectives.
  • Collaborate with Production, Engineering, Supply Chain, and Commercial teams to develop sustainable costing models and optimize product/process cost structures. ...

Be an early applicant!

Posted
a month ago
MYR3,500 - MYR6,000 Per Month
  • Perform other duties as assigned to support manufacturing operations.
  • Lead a team of manufacturing operators and line leaders to achieve output, quality, and cycle time targets.
  • Follow 5S practices, safety regulations, and quality standards at all times. ...
Team Leadership Operations Management
+2
Posted
4 days ago
MYR3,500 - MYR6,000 Per Month
  • Perform other duties as assigned to support manufacturing operations.
  • Lead a team of manufacturing operators and line leaders to achieve output, quality, and cycle time targets.
  • Follow 5S practices, safety regulations, and quality standards at all times. ...
Team Leadership Operations Management
+2
Posted
4 days ago
MYR3,500 - MYR6,000 Per Month
  • Perform other duties as assigned to support manufacturing operations.
  • Lead a team of manufacturing operators and line leaders to achieve output, quality, and cycle time targets.
  • Follow 5S practices, safety regulations, and quality standards at all times. ...
Team Leadership Operations Management
+2
Posted
4 days ago

Lumico Engineering Sdn Bhd

  • Managing all aspects of a project from start to finish, including scheduling resources, materials and overseeing construction
  • Identifying potential problems with electrical designs that could pose hazards to users or occupants of a building
  • Performing electrical engineering analyses to determine how to best meet customer needs while staying within budget constraints ...
Posted
14 days ago
  • Able to work extra hours, independently and full responsibility
  • Candidate must possess at least a SPM / Diploma / Professional Certificate in PW2/PW3/ PW4 or equivalent
  • Relevant wiring and networking experience in the related field is required for this position ...
Posted
9 days ago
  • Designing and overseeing the implementation of facility expansion, layout, various systems, and quality controls.
  • Evaluating operational systems and facility infrastructure to ascertain and improve operational efficiencies.
  • Developing processing plans and optimizing resource allocation. ...
Posted
17 days ago
  • Meal allowance
  • Opportunities for promotion
  • Professional development ...
Posted
a month ago
  • Prepare report based on mini development project
  • Assist engineer for hardware study project and evaluation study
  • Perform machine vision hardware setup and evaluation for integration ...
Posted
23 days ago
  • Production and Project Support: Assist in monitoring production processes, troubleshooting issues, and providing technical assistance for projects.
  • Collaboration: Work with cross-functional teams, including R&D, production, and quality assurance.
  • Continuous Learning and Presentation: Participate in training sessions and present project outcomes to the team. ...
Posted
2 days ago
  • Perform processes study with data collection.
  • Involve in line issue and problem solving, data analysis, process WI standardization with the guidance engineer.
  • Education: Candidate must possess or currently pursuing a Bachelor's Degree in Electrical / Electronics / Engineering / Manufacturing or equivalent. ...
Posted
17 days ago

ASE Semiconductor (Penang) Sdn Bhd

  • Assist in conducting experiments, tests, and evaluations.
  • Support documentation updates, SOP preparation, and engineering records maintenance.
  • Participate in project meetings and provide updates on assigned tasks. ...
Posted
17 days ago
  • Provide maintenance and repair of the solar system products
  • Daily operation of entire facility, electrical and monitoring on low and high voltage facility equipment's performance
  • Registered Competent Electrical Chargeman Certificate under Category – A1 Chargeman (MUST) ...
Posted
3 days ago
  • PLC/ SPLC programming base on project requirement.
  • on-site project commissioning. Provide guidance and advise for service and installation teams
  • electrical schematic diagram design using DraftSight and generate BOM ...
Posted
5 days ago
  • Provide maintenance and repair of the solar system products
  • Daily operation of entire facility, electrical and monitoring on low and high voltage facility equipment's performance
  • Registered Competent Electrical Chargeman Certificate under Category – A1 Chargeman (MUST) ...
Posted
10 days ago
  • Work as a key technical member and technical leader in electrical engineering.
  • Design electrical systems for our new products, create electrical schematics and prepare the bill of materials.
  • Perform analysis of electrical systems, including calculating power requirements and performing simulations. ...
Posted
5 days ago

In-Tech Electronics

  • Works with engineering on functionality issues and procedure updates.
  • Contributes to the development of work instructions, batch records, equipment logs, material specifications and other device history documents.
  • Helps monitor productivity by tracking yields and equipment cycle rates. ...
Posted
22 days ago
  • Participate in hardware verification, debugging, troubleshooting, and performance evaluation activities.
  • Assist in component selection, evaluation, and qualification.
  • Work closely with hardware, software, firmware, FPGA, and mechanical engineers to support product development activities. ...
Posted
23 days ago
  • Influence product design to ensure materials manufacturability and conformance with the global supply chain
  • Collaborate with procurement and internal product teams to improve and sustain products and processes through technical understanding of material technology obsolescence and future roadmap
  • Lead and work with suppliers on technical specifications studies and perform root cause analysis to meet Keysight quality expectations ...
Posted
16 days ago
WFH
  • Understand customer needs, recommend the best-fit solutions, and ensure successful implementation.
  • Build long-term customer relationships by delivering excellent service and problem-solving support.
  • Continuously improve our support services to raise customer satisfaction and loyalty. ...
Posted
24 days ago
  • With the relevant technical competencies, lead and execute product realization from conceptual stages all the way thru manufacturing transition.
  • Able to support the development of technical proposals for customers, providing technical solutions to realize concepts and estimating associated labor and material costs required.
  • Recognized subject matter expert for one or more technical areas. See Technical Competencies section. ...
Posted
a month ago

Voltz Engineering Sdn Bhd

  • Daily operation of entire facility, electrical and monitoring on low and high voltage facility equipment's performance
  • Candidate at least have knowledge electrical wiring
  • Preferably 1-2 years working experience in related fields ...
Posted
a month ago
  • Have good knowledge in failure analysis to root cause failures during early VnV and MFG builds.
  • Integrate DFM inputs from MFG to improve product yield & quality
  • Diagnose and debug technical challenges with products or problems arising when your products interact or integrate with other NI products ...
Posted
12 days ago
  • Perform timely root‑cause validation for lot‑on‑hold events, ensuring accurate disposition and minimal cycle‑time impact.
  • Collaborate with Test Engineering, Operations, OSAT teams and Quality to implement corrective actions that improve Final Test stability.
  • Track Lot On Hold actions to closure and verify effectiveness through post‑fix yield monitoring and parametric comparisons. ...
Posted
4 days ago
  • Provide machine electrical hardware troubleshooting and support
  • Prepare engineering documentation including wiring diagram, checklists, DCN, SOP, user manual and guidelines
  • Manage and keep all lab tools & equipment clean and tidy (5S) ...
Posted
10 days ago
Posted
10 days ago
  • Working experience in clean room environment will be an added advantage.
  • Familiar with facility equipment like Air Handling Units, Air-Conditioners, Chillers, Cooling Towers, Air Compressors, Air- Dryers, Vacuum System, Ring Blower, Scrubber and others mechanical system for a Manufacturing Facility.
  • Pro-active, independent and right attitude. ...
Posted
10 days ago
  • Working experience in clean room environment will be an added advantage.
  • Familiar with facility equipment like Air Handling Units, Air-Conditioners, Chillers, Cooling Towers, Air Compressors, Air- Dryers, Vacuum System, Ring Blower, Scrubber and others mechanical system for a Manufacturing Facility.
  • Pro-active, independent and right attitude. ...
Posted
10 days ago