31 Electrical And Engineering Jobs in Bayan Lepas - September 2026 - High Salaries

Showing 31 jobs results for "electrical and engineering" in Bayan Lepas
Never miss any updates for Electrical And Engineering jobs in Bayan Lepas

Lumico Engineering Sdn Bhd

  • Managing all aspects of a project from start to finish, including scheduling resources, materials and overseeing construction
  • Identifying potential problems with electrical designs that could pose hazards to users or occupants of a building
  • Performing electrical engineering analyses to determine how to best meet customer needs while staying within budget constraints ...
Posted
7 days ago
  • Able to work extra hours, independently and full responsibility
  • Candidate must possess at least a SPM / Diploma / Professional Certificate in PW2/PW3/ PW4 or equivalent
  • Relevant wiring and networking experience in the related field is required for this position ...
Posted
2 days ago
  • Designing and overseeing the implementation of facility expansion, layout, various systems, and quality controls.
  • Evaluating operational systems and facility infrastructure to ascertain and improve operational efficiencies.
  • Developing processing plans and optimizing resource allocation. ...
Posted
10 days ago
  • Meal allowance
  • Opportunities for promotion
  • Professional development ...
Posted
19 days ago
  • Prepare report based on mini development project
  • Assist engineer for hardware study project and evaluation study
  • Perform machine vision hardware setup and evaluation for integration ...
Posted
16 days ago
  • Provide maintenance and repair of the solar system products
  • Daily operation of entire facility, electrical and monitoring on low and high voltage facility equipment's performance
  • Registered Competent Electrical Chargeman Certificate under Category – A1 Chargeman (MUST) ...
Posted
3 days ago

In-Tech Electronics

  • Works with engineering on functionality issues and procedure updates.
  • Contributes to the development of work instructions, batch records, equipment logs, material specifications and other device history documents.
  • Helps monitor productivity by tracking yields and equipment cycle rates. ...
Posted
15 days ago
  • Participate in hardware verification, debugging, troubleshooting, and performance evaluation activities.
  • Assist in component selection, evaluation, and qualification.
  • Work closely with hardware, software, firmware, FPGA, and mechanical engineers to support product development activities. ...
Posted
16 days ago
WFH
  • Understand customer needs, recommend the best-fit solutions, and ensure successful implementation.
  • Build long-term customer relationships by delivering excellent service and problem-solving support.
  • Continuously improve our support services to raise customer satisfaction and loyalty. ...
Posted
17 days ago
  • Perform processes study with data collection.
  • Involve in line issue and problem solving, data analysis, process WI standardization with the guidance engineer.
  • Education: Candidate must possess or currently pursuing a Bachelor's Degree in Electrical / Electronics / Engineering / Manufacturing or equivalent. ...
Posted
10 days ago

ASE Semiconductor (Penang) Sdn Bhd

  • Assist in conducting experiments, tests, and evaluations.
  • Support documentation updates, SOP preparation, and engineering records maintenance.
  • Participate in project meetings and provide updates on assigned tasks. ...
Posted
10 days ago
  • With the relevant technical competencies, lead and execute product realization from conceptual stages all the way thru manufacturing transition.
  • Able to support the development of technical proposals for customers, providing technical solutions to realize concepts and estimating associated labor and material costs required.
  • Recognized subject matter expert for one or more technical areas. See Technical Competencies section. ...
Posted
19 days ago

Voltz Engineering Sdn Bhd

  • Daily operation of entire facility, electrical and monitoring on low and high voltage facility equipment's performance
  • Candidate at least have knowledge electrical wiring
  • Preferably 1-2 years working experience in related fields ...
Posted
19 days ago
  • Influence product design to ensure materials manufacturability and conformance with the global supply chain
  • Collaborate with procurement and internal product teams to improve and sustain products and processes through technical understanding of material technology obsolescence and future roadmap
  • Lead and work with suppliers on technical specifications studies and perform root cause analysis to meet Keysight quality expectations ...
Posted
9 days ago
  • Provide maintenance and repair of the solar system products
  • Daily operation of entire facility, electrical and monitoring on low and high voltage facility equipment's performance
  • Registered Competent Electrical Chargeman Certificate under Category – A1 Chargeman (MUST) ...
Posted
a month ago

Voltz Engineering Sdn Bhd

  • Daily operation of entire facility, electrical and monitoring on low and high voltage facility equipment's performance
  • Candidate at least have knowledge electrical wiring
  • Preferably 1-2 years working experience in related fields ...
Posted
a month ago

Synapsys Technology Sdn Bhd

  • Training will be provided.
  • Fresh Graduates are encouraged to apply.
  • Bachelor's Degree in Engineering (Electrical/Electronic) or Professional Degree in Electrical/Electronic Engineering or in Engineering Mechatronic. ...
Posted
24 days ago
  • Have good knowledge in failure analysis to root cause failures during early VnV and MFG builds.
  • Integrate DFM inputs from MFG to improve product yield & quality
  • Diagnose and debug technical challenges with products or problems arising when your products interact or integrate with other NI products ...
Posted
5 days ago
  • Working experience in clean room environment will be an added advantage.
  • Familiar with facility equipment like Air Handling Units, Air-Conditioners, Chillers, Cooling Towers, Air Compressors, Air- Dryers, Vacuum System, Ring Blower, Scrubber and others mechanical system for a Manufacturing Facility.
  • Pro-active, independent and right attitude. ...
Posted
3 days ago
Posted
3 days ago
  • Provide machine electrical hardware troubleshooting and support
  • Prepare engineering documentation including wiring diagram, checklists, DCN, SOP, user manual and guidelines
  • Manage and keep all lab tools & equipment clean and tidy (5S) ...
Posted
3 days ago
  • Working experience in clean room environment will be an added advantage.
  • Familiar with facility equipment like Air Handling Units, Air-Conditioners, Chillers, Cooling Towers, Air Compressors, Air- Dryers, Vacuum System, Ring Blower, Scrubber and others mechanical system for a Manufacturing Facility.
  • Pro-active, independent and right attitude. ...
Posted
3 days ago
  • Experience in design validation, product qualification, and continuous improvement of existing products.
  • Proven ability to manage multiple sustaining products while achieving yield, quality, and reliability targets.
  • Strong analytical and problem-solving skills with the ability to interpret test data, perform root cause analysis, and drive corrective actions. ...
Posted
6 days ago
  • Data analysis management ability (Use Case analysis).
  • Willing to work a shift 12-hours shift pattern (Day/Night), subject to client requirements.
  • Emotional Intelligence oriented. ...
Posted
10 days ago
  • Experience troubleshooting and supporting PLCs and HMIs.
Posted
10 days ago
  • Ability to analyze problems, develop solutions, and implement them effectively.
  • Strong proficiency in Microsoft Office, working knowledge of Minitab, and a basic understanding of Visual Basic programming and statistical concepts.
  • Basic skills in managing projects, including planning, execution, and reporting. ...
Posted
4 days ago
  • Conduct detailed investigations for quality incidents related to test equipment, perform root cause analysis, and implement effective corrective and preventive actions.
  • Perform product conversions, equipment setup, calibration, and optimization to support various production and engineering requirements.
  • Monitor and analyze KPIVs using tools such as KPOV database, OEE tracking, Maintenance Logs, and Digital Preventive Maintenance systems to identify trends and drive equipment improvement actions. ...
Posted
15 days ago
  • Candidates should possess Communication skills to collaborate effectively across engineering, manufacturing, and customer-facing teams, and to create clear technical documentation.
  • Beneficial qualifications include a bachelor’s or master’s degree in Electrical, Electronics, Mechanical, or related engineering field; experience with automated test systems; familiarity with NI/Emerson tools and platforms; and knowledge of quality and reliability engineering practices.
  • Additional skills include problem-solving, project management, and a track record of working in high-tech or semiconductor manufacturing environments. ...
Posted
24 days ago
Posted
19 days ago
  • Monitor project progress, quality, cost, and timeline.
  • Conduct site inspections and monitor installation works.
  • Coordinate testing, commissioning, inspection, and certification of works. ...
Posted
a month ago