74 Electrical And Engineering Jobs in Bayan Lepas - September 2026 - High Salaries
Showing 74 jobs results for
"electrical and engineering"
in Bayan Lepas
Mechanical & Electrical Technician / Electrical Assembler
MYR2,500 - MYR3,500 Per Month
- Maintain a clean, organized, and safe working environment.
- Assemble electrical and electronic components according to technical drawings and schematics.
- Perform wiring, soldering, and testing of electrical components. ...
Posted
4 days ago
MYR4,000 - MYR6,000 Per Month
- Read and interpret electrical schematics, panel layout drawings, wiring diagrams, and pneumatic diagrams.
- Perform electrical I/O checking, continuity testing, insulation testing, and functional verification.
- Troubleshoot electrical, control, and wiring issues during machine assembly and commissioning. ...
Be an early applicant!
Posted
18 days ago
MYR2,500 - MYR3,300 Per Month
- Operate and handle electronic measurement equipment such as oscilloscopes, power supplies, and electronic loads
- Perform electronic assembly tasks including hand soldering, solder touch-up, and PCBA rework
- Compile, record, and maintain accurate test data and measurement results in proper documentation format ...
Posted
2 months ago
MYR2,300 - MYR3,500 Per Month
- Follow all safety procedures, SOPs, and work instructions.
- Record maintenance activities and equipment issues accurately.
- Report recurring equipment issues or abnormal conditions for further investigation and improvement. ...
Be an early applicant!
Posted
2 days ago
MYR2,000 - MYR2,500 Per Month
Fresh Graduates
- Perform electrical validationincludingunpowered IV curve and Time-Domain Reflectometry (TDR) to identify failing areas.
- Utilize CSAM, X-ray imaging, and material analysis tools for defect detection.
- Carry out visual inspection using microscopes to identify defects on product substrates. ...
Be an early applicant!
Posted
22 days ago
MYR5,500 - MYR6,300 Per Month
- Read design plans, tolerances, and specifications for products and machinery.
- Exercises judgment in recommending suppliers, methods and techniques for obtaining solutions to manager.
- Documents selection of components/subassemblies to deliver required performance and compliance specifications. ...
Posted
2 months ago
MYR3,000 - MYR4,000 Per Month
- Operating failure analysis equipment to perform the failure analysis task.
- Primary job duties are to maximize output using constraint management Techniques while sustaining process, equipment issues, training and cross training cluster members while building a self-sustaining cluster team.
- Multi-tasked responsibilities include, non-standard processing and problem-solving, as well as actual processing of state-of-the-art device. ...
Posted
2 months ago
MYR3,800 - MYR5,000 Per Month
- Establish priority list on gaps/opportunities with effective closure plan.
- Drive effective work method and solution through automation and poka yoke solution.
- Provide OPL (One Point Lesson) and certification test to ensure all floor personnel are adequately trained and qualified. ...
Posted
2 months ago
Undisclosed
- Monitoring on hold lot disposition and provide communication with engineer in order to not impact daily assembly output.
- Maintain all housekeeping / 5s engineering station and tooling’s, to ensure compliance to safety rules.
- Monitor all processes, resolve all products issues and coordinate with production and equipment to reduce downtime and getting better product quality. ...
Posted
a month ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Interfaces with personnel on production, QA and other support groups regarding product/process related problems and disposition.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Posted
a month ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Review bonding diagrams, strip drawings, process requirements, customers specifications and standard.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Be an early applicant!
Posted
18 days ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Interfaces with personnel on production, QA and other support groups regarding product/process related problems and disposition.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Support PM on tooling and equipment conversion and buy-off.
- Ability to handle semi-major machine breakdown, trouble-shooting and able to read machine electrical and pneumatic diagram.
- Contribute idea of improvement, participate on productivity and equipment improvement project. ...
Be an early applicant!
Posted
a month ago
MYR6,000 - MYR7,500 Per Month
- Conduct machine troubleshoot assembly-related issues.
- Work closely with Mechanical, Electrical, and Software Engineering teams to resolve technical problems during machine build.
- Ensure all assembly work complies with quality, safety, and production standards. ...
Good electro-mechanical equipment troubleshooting skills.
Read and orally communicate in Mandarin (writing ability not required).
+3
Be an early applicant!
Posted
23 days ago
Undisclosed
- Support engineering build requests, ramp ups and platform extensions.
- Monitor and improving the yield of DA/GA process, including cost reduction activities.
- Support on the TMM and TMS activities ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Adjust machine parameters as needed to maintain optimal performance.
- Adhere to defined process flows, ensuring all steps are executed per manufacturing guidelines.
- Record and track production metrics such as yield, cycle time, and defect rates. ...
Be an early applicant!
Posted
a month ago
MYR4,000 - MYR6,000 Per Month
- Conduct machine troubleshoot assembly-related issues.
- Work closely with Mechanical, Electrical, and Software Engineering teams to resolve technical problems during machine build.
- Ensure all assembly work complies with quality, safety, and production standards. ...
Posted
18 days ago
Undisclosed
- Monitoring on hold lot disposition and provide communication with engineer in order to not impact daily assembly output.
- Maintain all housekeeping / 5s engineering station and tooling’s, to ensure compliance to safety rules.
- Monitor all processes, resolve all products issues and coordinate with production and equipment to reduce downtime and getting better product quality. ...
Posted
a month ago
Undisclosed
- Verify machine settings and ensure calibration is correct before starting operations.
- Adjust machine parameters as needed to maintain optimal performance.
- Process Control and Documentation: ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Verify machine settings and ensure calibration is correct before starting operations.
- Adjust machine parameters as needed to maintain optimal performance.
- Process Control and Documentation: ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Monitoring on hold lot disposition and provide communication with engineer in order to not impact daily assembly output.
- Maintain all housekeeping / 5s engineering station and tooling’s, to ensure compliance to safety rules.
- Monitor all processes, resolve all products issues and coordinate with production and equipment to reduce downtime and getting better product quality. ...
Posted
a month ago
Undisclosed
- Monitoring on hold lot disposition and provide communication with engineer in order to not impact daily assembly output.
- Maintain all housekeeping / 5s engineering station and tooling’s, to ensure compliance to safety rules.
- Monitor all processes, resolve all products issues and coordinate with production and equipment to reduce downtime and getting better product quality. ...
Posted
a month ago
Undisclosed
- Verify machine settings and ensure calibration is correct before starting operations.
- Adjust machine parameters as needed to maintain optimal performance.
- Process Control and Documentation: ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Monitoring on hold lot disposition and provide communication with engineer in order to not impact daily assembly output.
- Maintain all housekeeping / 5s engineering station and tooling’s, to ensure compliance to safety rules.
- Monitor all processes, resolve all products issues and coordinate with production and equipment to reduce downtime and getting better product quality. ...
Posted
a month ago
Undisclosed
- Verify machine settings and ensure calibration is correct before starting operations.
- Adjust machine parameters as needed to maintain optimal performance.
- Process Control and Documentation: ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Work with site management to promote data exploration & visualization to enable automation and productivity improvement
- Identifying opportunities for operational efficiency, process & quality improvement, labor cost optimization across factory.
- Work with smart manufacturing team to implementation of advanced technologies such as Internet of Things (IoT), Artificial Intelligence (AI), System Integration, Robotic Process Automation (RPA) and Predictive Maintenance across the CIS department. ...
Posted
a month ago
Undisclosed
- Verify machine settings and ensure calibration is correct before starting operations.
- Adjust machine parameters as needed to maintain optimal performance.
- Process Control and Documentation: ...
Be an early applicant!
Posted
a month ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Interfaces with personnel on production, QA and other support groups regarding product/process related problems and disposition.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Posted
a month ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Interfaces with personnel on production, QA and other support groups regarding product/process related problems and disposition.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Posted
a month ago
Undisclosed
- Follow up all on going evaluation in the assigned area and handle on the line technical trouble.
- Interfaces with personnel on production, QA and other support groups regarding product/process related problems and disposition.
- Prepares the necessary process instruction and conduct training to the floor member. ...
Posted
a month ago